AWT6109 KPCS CDMA 3.5V/28.5dBm Linear Power Amplifier Module Data Sheet - Rev 2.2 FEATURES • • • • • • • • • • InGaP HBT Technology High Efficiency (35% Typ) Low Leakage Current (5µA) SMT Module Package Small Foot Print (6mm x 6mm) Low Profile (1.5mm) 50 Ω Input and Output Matching POUT = 28.5 dBm @ Icq= 60mA Typ No Mode Switching Required CDMA 2000 1XRTT Compliant APPLICATIONS • Korean Band PCS CDMA Handsets M5 Package 7 Pin 6mm x 6mm Surface Mount Module PRODUCT DESCRIPTION The AWT6109 is a 3.5 V (3.0 V to 4.2 V) high efficiency, 3 stage amplifier module for Korean Band PCS handsets. The device is manufactured on an advanced InGaP HBT MMIC technology offering state-of-the-art reliability, temperature stability, and ruggedness. Full output power is achieved at a low quiescent current of 60mA, reducing power drain on the system battery. No switching is required between high and low output power levels. The 6mm x 6mm laminate package is self contained, incorporating 50 Ω input and output matching networks optimized for output power, linearity, and efficiency. V CC 1 7 GND RF IN 2 6 RF OUT 5 V CC Bias Control V REF 3 4 V MODE Figure 1: Block Diagram 06/2002 AWT6109 VCC 1 7 GND RFIN 2 6 RFOUT VREF 3 5 VCC 4 VMODE Figure 2: Pinout (X-ray Top View) Table 1: Pin Description 2 PIN NAME DESCRIPTION 1 V CC Supply Voltage 2 RFIN RF Input Signal 3 VREF Reference Voltage 4 VMODE Mode Control 5 V CC Supply Voltage 6 RFOUT RF Output 7 GND Ground Data Sheet - Rev 2.2 06/2002 AWT6109 ELECTRICAL CHARACTERISTICS Table 2: Absolute Minimum and Maximum Ratings PARAMETER MIN MAX UNIT Supply Voltage (VCC ) 0 +5 V Mode Control Voltage (VMODE) 0 +3.5 V Reference Voltage (VREF) 0 +3.5 V RF Input Power (PIN) - +10 dB m -40 +150 °C Storage Temperature (TSTG) Stresses in excess of the absolute ratings may cause permanent damage. Functional operation is not implied under these conditions. Exposure to absolute ratings for extended periods of time may adversely affect reliability. Table 3: Operating Ranges PARAMETER MIN TYP MAX UNIT Operating Frequency (f) 1750 - 1780 MHz Supply Voltage (VCC) +3.0 +3.5 +4.2 V Reference Voltage (VREF) +2.75 0 +3.0 - +3.1 +0.5 V PA "on" PA "shut down" Mode Control Voltage (VMODE) +2.5 0 +2.7 - +3.1 +0.5 V PA "on" PA "shut down" RF Output Power (POUT) +28 +28.5 - dB m Case Temperature (TC) -30 - +110 o COMMENTS C The device may be operated safely over these conditions; however, parametric performance is guaranteed only over the conditions defined in the electrical specifications. Data Sheet - Rev 2.2 06/2002 3 AWT6109 Table 4: Electrical Specifications Ω System) (TC = +25 °C, VCC = +3.5 V, VREF = +3.0 V, VMODE = +2.7 V, POUT = +28.5 dBm, 50Ω PARAMETER MIN TYP MAX UNIT 27 30.5 32 dB Adjacent Channel Power at ±1.25 MHz offset - -52.5 -46.5 dB Primary Channel BW = 1.23 MHz Adjacent Channel BW = 30KHz Adjacent Channel Power at ±2.25 MHz offset - -60 -57 dB Primary Channel BW = 1.23 MHz Adjacent Channel BW = 30KHz Efficiency 31 6 35 7 - % +28.5 dBm Output Power +16 dBm Output Power Quiescent Current (Icq) 50 65 85 mA <5 10 µA Gain Leakage Current (shutdown mode) Noise in Receive Band - -136 -134 Harmonics 2fo 3fo, 4fo - -42 -50 -30 -30 dB c Input Impedance - - 2:1 VSWR Spurious Output Level (all spurious outputs) Load mismatch stress with no permanent degradation or failure 4 - 8:1 - - VREF = 0 V, VMODE = 0 V dBm/Hz 1840 MHz to 1870 MHz -70 - COMMENTS dB c VSWR Data Sheet - Rev 2.2 06/2002 POUT < +29 dBm In-band load VSWR < 8:1 Out-of-band load VSWR < 8:1 Applies over all voltage and temperature operating ranges VCC = +5.0 V PIN = +5 dBm Applies over full operating temperature range AWT6109 PERFORMANCE DATA Figure 4: Adjacent Channel Power vs. POUT (f = 1780 MHz, VCC = +3.0 V, VREF = +3.0 V, VMODE = +2.7 V, fACP = 1.25 MHz) -40 10 31 9 30 8 29 7 28 6 27 5 26 4 25 3 24 2 +85 °C +25 °C -30 °C 23 22 -12 -10 -8 -6 -4 -2 0 2 4 6 8 10 12 14 16 -45 Efficiency (%) 32 Adjacent Channel Power (dBc) Gain (dB) Figure 3: Gain and Efficiency vs. POUT (f = 1750 MHz, VCC = +3.0 V, VREF = +3.0 V, VMODE = +2.7 V) -50 -55 -60 -65 -70 -75 +85 °C +25 °C -30 °C -80 1 -85 0 -90 -12 18 -10 -8 -6 -4 -2 -40 9 -45 30 8 -50 29 7 28 6 27 5 26 4 25 3 24 2 +85 °C +25 °C -30 °C 23 22 -8 -6 -4 -2 0 2 4 6 8 10 12 14 16 Efficiency (%) 10 31 Adjacent Channel Power (dBc) Gain (dB) 32 -10 -85 0 -90 18 -12 -50 29 7 28 6 27 5 26 4 25 3 24 2 +85 °C +25 °C -30 °C 23 22 4 6 8 10 12 14 16 18 Efficiency (%) 8 Adjacent Channel Power (dBc) Gain (dB) -45 30 2 16 18 -10 -8 -6 -4 -2 0 2 4 6 8 10 12 14 16 18 Output Power (dBm) -40 0 14 +85 °C +25 °C -30 °C -80 1 9 -2 12 -75 10 -4 10 -70 31 -6 8 -65 32 -8 6 -60 Figure 7: Gain and Efficiency vs. POUT (f = 1750 MHz, VCC = +4.2 V, VREF = +3.0 V, VMODE = +2.7 V) -10 4 -55 Output Power (dBm) -12 2 Figure 6: Adjacent Channel Power vs. POUT (f = 1780 MHz, VCC = +3.5 V, VREF = +3.0 V, VMODE = +2.7 V, fACP = 1.25 MHz) Figure 5: Gain and Efficiency vs. POUT (f = 1750 MHz, VCC = +3.5 V, VREF = +3.0 V, VMODE = +2.7 V) -12 0 Output Power (dBm) Output Power (dBm) Figure 8: Adjacent Channel Power vs. POUT (f = 1780 MHz, VCC = +4.2 V, VREF = +3.0 V, VMODE = +2.7 V, fACP = 1.25 MHz) -55 -60 -65 -70 -75 +85 °C +25 °C -30 °C -80 1 -85 0 -90 -12 -10 -8 -6 -4 -2 0 2 4 6 8 10 12 14 16 18 Output Power (dBm) Output Power (dBm) Data Sheet - Rev 2.2 06/2002 5 AWT6109 Figure 10: Adjacent Channel Power vs. Freq. (POUT = +16.0 dBm, VCC = +3.5 V, VREF = +3.0 V, VMODE = +2.7 V, fACP = 1.25 MHz) -45 -45 -50 -50 Adjacent Channel power (dBc) Adjacent Channel Power (dBc) Figure 9: Adjacent Channel Power vs. Freq. (POUT = +28.5 dBm, VCC = +3.5 V, VREF = +3.0 V, VMODE = +2.7 V, fACP = 1.25 MHz) -55 -60 -65 -70 +85 °C +25 °C -30 °C -75 -80 1745 1750 1755 1760 1765 1770 1775 -55 -60 -65 -70 +85 °C +25 °C -30 °C -75 1780 -80 1745 1785 1750 1755 1760 Figure 11: Adjacent Channel Power vs. Freq. (POUT = +28.5 dBm, VCC = +3.5 V, VREF = +3.0 V, VMODE = +2.7 V, fACP = 2.25 MHz) Adjacent Channel Power (dBc) Adjacent Channel Power (dBc) 1780 1785 +85 °C +25 °C -30 °C -50 -55 -60 -65 -70 -75 -55 -60 -65 -70 -75 1750 1755 1760 1765 1770 1775 1780 -80 1745 1785 1750 1755 1760 Frequency (MHz) 1765 1770 1775 1780 1785 Frequency (MHz) Figure 13: Power-Added Efficiency vs. Freq. (POUT = +28.5 dBm, VCC = +3.5 V, VREF = +3.0 V, VMODE = +2.7 V) Figure 14: Power-Added Efficiency vs. Freq. (POUT = +16.0 dBm, VCC = +3.5 V, VREF = +3.0 V, VMODE = +2.7 V) 39 12 +85 °C +25 °C -30 °C 37 36 35 34 10 9 8 7 6 33 32 1745 +85 °C +25 °C -30 °C 11 Power-Added Efficiency (%) 38 Power-Added Efficiency (%) 1775 -45 +85 °C +25 °C -30 °C -50 1750 1755 1760 1765 1770 1775 1780 1785 5 1745 1750 1755 1760 1765 Frequency (MHz) Frequency (MHz) 6 1770 Figure 12: Adjacent Channel Power vs. Freq. (POUT = +16.0 dBm, VCC = +3.5 V, VREF = +3.0 V, VMODE = +2.7 V, fACP = 2.25 MHz) -45 -80 1745 1765 Frequency (MHz) Frequency (MHz) Data Sheet - Rev 2.2 06/2002 1770 1775 1780 1785 AWT6109 Figure 15: Large Signal Gain vs. Freq. (POUT = +28.5 dBm, VCC = +3.5 V, VREF = +3.0 V, VMODE = +2.7 V) 34 +85 °C +25 °C -30 °C Large Signal Gain (dB) 33 32 31 30 29 28 27 1745 1750 1755 1760 1765 1770 1775 1780 1785 Frequency (MHz) Figure 16: Large Signal Gain vs. Freq. (POUT = +16.0 dBm, VCC = +3.5 V, VREF = +3.0 V, VMODE = +2.7 V) 34 +85 °C +25 °C -30 °C Large Signal Gain (dB) 33 32 31 30 29 28 27 1745 1750 1755 1760 1765 1770 1775 1780 1785 Frequency (MHz) Figure 17: Small Signal Gain vs. Freq. (PIN = -20 dBm, VCC = +3.5 V, VREF = +3.0 V, VMODE = +2.7 V) 32 +85 °C +25 °C -30 °C Small Signal Gain (dB) 31 30 29 28 27 26 25 1745 1750 1755 1760 1765 1770 1775 1780 1785 Frequency (MHz) Data Sheet - Rev 2.2 06/2002 7 AWT6109 Figure 19: Output Power vs. Input Power (f = 1765 MHz, VCC = +3.5 V, VREF = +2.85 V, VMODE = +2.7 V) Figure 18: Gain and Efficiency vs. POUT (f = 1765 MHz, VCC = +3.5 V, VREF = +2.85 V, VMODE = +2.7 V) 35 34 50 +85 °C +25 °C -30 °C 34 33 45 +85 °C +25 °C -30 °C 30 40 31 30 30 25 29 20 28 15 27 10 26 5 25 0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 Output Power (dBm) 35 Efficiency (%) Gain (dB) 26 32 22 18 14 10 6 2 32 -26 Output Power (dBm) -22 -18 -14 -10 -6 -2 2 6 Input Power (dBm) Figure 20: Gain vs. Frequency (POUT = +28.5 dBm, VCC = +3.5 V, VREF = +2.85 V, VMODE = +2.7 V) Figure 21: Power-Added Efficiency vs. Freq. (POUT = +28.5 dBm, VCC = +3.5 V, VREF = +2.85 V, VMODE = +2.7 V) 37 38 +85 °C +25 °C -30 °C 36 35 +85 °C +25 °C -30 °C 37 Efficiency (%) Gain (dB) 34 33 32 31 36 35 30 29 34 28 27 1745 1750 1755 1760 1765 1770 1775 1780 33 1745 1785 1750 1755 Frequency (MHz) 1760 1765 1770 1775 1780 1785 Frequency (MHz) Figure 22: Gain vs. Frequency (POUT = +16.0 dBm, VCC = +3.5 V, VREF = +2.85 V, VMODE = +2.7 V) Figure 23: Power-Added Efficiency vs. Freq. (POUT = +16.0 dBm, VCC = +3.5 V, VREF = +2.85 V, VMODE = +2.7 V) 37 10 +85 °C +25 °C -30 °C 36 35 +85 °C +25 °C -30 °C 9 Efficiency (%) Gain (dB) 34 33 32 31 8 7 30 29 6 28 27 1745 1750 1755 1760 1765 1770 1775 1780 1785 5 1745 Frequency (MHz) 8 1750 1755 1760 1765 1770 Frequency (MHz) Data Sheet - Rev 2.2 06/2002 1775 1780 1785 AWT6109 -35 -40 -40 -45 -45 Adjacent Channel Power (dB) Adjacent Channel Power (dB) -35 Figure 24: Adjacent Channel Power vs. POUT (f = 1765 MHz, VCC = +3.5 V, VREF = +2.85 V, VMODE = +2.7 V, fACP = 1.25 MHz) -50 -55 -60 -65 -70 +85 °C +25 °C -30 °C -75 -80 Figure 25: Adjacent Channel Power vs. POUT (f = 1765 MHz, VCC = +3.5 V, VREF = +2.85 V, VMODE = +2.7 V, fACP = 2.25 MHz) -50 -55 -60 -65 -70 +85 °C +25 °C -30 °C -75 -80 -85 -85 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 2 32 4 6 8 10 -35 -40 -40 -45 -45 Adjacent Channel Power (dB) Adjacent Channel Power (dB) -35 -50 -55 -60 -65 -70 +85 °C +25 °C -30 °C -75 -80 1750 1755 1760 1765 1770 1775 1780 28 30 32 +85 °C +25 °C -30 °C -75 -85 1745 1785 1750 1755 1760 1765 1770 1775 1780 1785 Frequency (MHz) Figure 29: Adjacent Channel Power vs. Freq. (POUT = +16.0 dBm, VCC = +3.5 V, VREF = +2.85 V, VMODE = +2.7 V, fACP = 2.25 MHz) -40 -45 Adjacent Channel Power (dB) Adjacent Channel Power (dB) 26 -70 -45 -50 -55 -60 -65 -70 +85 °C +25 °C -30 °C -75 -80 1770 24 -65 -40 1765 22 -60 -35 1760 20 -55 -35 1755 18 -80 Figure 28: Adjacent Channel Power vs. Freq. (POUT = +16.0 dBm, VCC = +3.5 V, VREF = +2.85 V, VMODE = +2.7 V, fACP = 1.25 MHz) 1750 16 -50 Frequency (MHz) -85 1745 14 Figure 27: Adjacent Channel Power vs. Freq. (POUT = +28.5 dBm, VCC = +3.5 V, VREF = +2.85 V, VMODE = +2.7 V, fACP = 2.25 MHz) Figure 26: Adjacent Channel Power vs. Freq. (POUT = 28.5 dBm, VCC = +3.5 V, VREF = +2.85 V, VMODE = +2.7 V, fACP = 1.25 MHz) -85 1745 12 Output Power (dBm) Output Power (dBm) 1775 1780 -50 -55 -60 -65 -70 +85 °C +25 °C -30 °C -75 -80 1785 -85 1745 Frequency (MHz) 1750 1755 1760 1765 1770 1775 1780 1785 Frequency (MHz) Data Sheet - Rev 2.2 06/2002 9 AWT6109 Figure 31: Current Consumption vs. POUT (f = 1765 MHz, VCC = +3.5 V, VREF = +2.85 V, VMODE = +2.7 V) -35 1.0 -40 0.9 -45 0.8 Current Consumption (A) Harmonic Level (dB) Figure 30: Harmonic Levels vs. POUT (f = 1765 MHz, VCC = +3.5 V, VREF = +2.85 V, VMODE = +2.7 V) -50 -55 -60 -65 2nd Harmonic, +85 °C 2nd Harmonic, +25 °C 2nd Harmonic, -30 °C 3rd Harmonic, +85 °C 3rd Harmonic, +25 °C 3rd Harmonic, -30 °C -70 -75 -80 0.7 0.6 0.5 0.4 0.3 +85 °C +25 °C -30 °C 0.2 0.1 0.0 -85 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 2 32 4 6 8 10 -35 1.0 -40 0.9 -45 0.8 -50 -55 -60 -65 2nd Harmonic, +85 °C 2nd Harmonic, +25 °C 2nd Harmonic, -30 °C 3rd Harmonic, +85 °C 3rd Harmonic, +25 °C 3rd Harmonic, -30 °C -75 -80 -85 1745 1750 1755 1760 1765 1770 14 16 18 20 22 24 26 28 30 32 Figure 33: Current Consumption vs. Freq. (POUT = +28.5 dBm, VCC = +3.5 V, VREF = +2.85 V, VMODE = +2.7 V) 1775 1780 Current Consumption (A) Harmonic Level (dB) Figure 32: Harmonic Levels vs. Freq. (POUT = +28.5 dBm, VCC = +3.5 V, VREF = +2.85 V, VMODE = +2.7 V) -70 12 Output Power (dBm) Output Power (dBm) 0.7 0.6 0.5 0.4 0.3 +85 °C +25 °C -30 °C 0.2 0.1 0.0 1745 1785 1750 1755 Frequency (MHz) 1760 1765 1770 1775 1780 1785 Frequency (MHz) Figure 35: Current Consumption vs. Freq. (POUT = +16.0 dBm, VCC = +3.5 V, VREF = +2.85 V, VMODE = +2.7 V) Figure 34: Harmonic Levels vs. Freq. (POUT = +16.0 dBm, VCC = +3.5 V, VREF = +2.85 V, VMODE = +2.7 V) 0.5 -35 -40 0.4 -50 -55 -60 -65 2nd Harmonic, +85 °C 2nd Harmonic, +25 °C 2nd Harmonic, -30 °C 3rd Harmonic, +85 °C 3rd Harmonic, +25 °C 3rd Harmonic, -30 °C -70 -75 -80 -85 1745 1750 1755 1760 1765 1770 1775 1780 1785 Current Consumption (A) Harmonic Level (dB) -45 0.3 0.2 0.0 1745 1750 1755 1760 1765 1770 Frequency (MHz) Frequency (MHz) 10 +85 °C +25 °C -30 °C 0.1 Data Sheet - Rev 2.2 06/2002 1775 1780 1785 AWT6109 APPLICATION INFORMATION Shutdown Mode The power amplifier may be placed in a shutdown mode by applying logic low levels (see Operating Ranges table) to both the VREF and VMODE voltages. To ensure proper performance, refer to all related Application Notes on the ANADIGICS web site: http://www.anadigics.com GND at slug VCC 7 1 0.01uF RF Input (50 Ohms) RF Output (50 Ohms) 2 6 Bias Control VREF 3 4 VCC 5 0.01uF 0.01uF VMODE Figure 36: Application Circuit Schematic Data Sheet - Rev 2.2 06/2002 11 AWT6109 PACKAGE OUTLINE Figure 37: M5 Package Outline - 7 Pin 6mm x 6mm Surface Mount Module (High Band) Figure 38: Branding Specification 12 Data Sheet - Rev 2.2 06/2002 AWT6109 COMPONENT PACKAGING Dimensions are in mm [in] Figure 39: Tape & Reel Packaging Table 5: Tape & Reel Dimensions PACKAGE TYPE TAPE WIDTH POCKET PITCH REEL CAPACITY MAX REEL DIA 6mm X 6mm 12mm 8mm 2500 13" Data Sheet - Rev 2.2 06/2002 13 AWT6109 NOTES 14 Data Sheet - Rev 2.2 06/2002 AWT6109 NOTES Data Sheet - Rev 2.2 06/2002 15 AWT6109 ORDERING INFORMATION ORDER NUMBER TEMPERATURE RANGE PACKAGE DESCRIPTION COMPONENT PACKAGING AWT6109M5P8 -30 oC to +110 oC 7 Pin 6mm x 6mm Surface Mount Module Tape and Reel, 2500 pieces per reel ANADIGICS, Inc. 141 Mount Bethel Road Warren, New Jersey 07059, U.S.A. Tel: +1 (908) 668-5000 Fax: +1 (908) 668-5132 URL: http://www.anadigics.com E:mail: [email protected] IMPORTANT NOTICE ANADIGICS, Inc. reserves the right to make changes to its products or to discontinue any product at any time without notice. The product specifications contained in Advanced Product Information sheets and Preliminary Data Sheets are subject to change prior to a product’s formal introduction. Information in Data Sheets have been carefully checked and are assumed to be reliable; however, ANADIGICS assumes no responsibilities for inaccuracies. ANADIGICS strongly urges customers to verify that the information they are using is current before placing orders. WARNING ANADIGICS products are not intended for use in life support appliances, devices, or systems. Use of an ANADIGICS product in any such application without written consent is prohibited. 16 Data Sheet - Rev 2.2 06/2002