STS5343N Semiconductor NPN Silicon Transistor Description • General small signal amplifier Features • Low collector saturation voltage : VCE(sat)=0.25V(Max.) • Low output capacitance : Cob=2pF(Typ.) • Complementary pair with STS1980N Ordering Information Type NO. Marking Package Code STS5343N STS5343 TO-92N Outline Dimensions unit : mm 4.20~4.40 4.20~4.40 2.25 Max. 2.14 Typ. 13.50~14.50 0.52 Max. 0.90 Max. 1.27 Typ. 0.40 Max. 1 2 3 3.09~3.29 3.55 Typ PIN Connections 1. Emitter 2. Base 3. Collector KSD-T0C056-000 1 STS5343N Absolute Maximum Ratings (Ta=25°C) Characteristic Symbol Rating Unit Collector-base voltage VCBO 60 V Collector-emitter voltage VCEO 50 V Emitter-base voltage VEBO 5 V Collector current IC 150 mA Collector power dissipation PC 400 mW Junction temperature TJ 150 °C Tstg -55~150 °C Storage temperature range Electrical Characteristics (Ta=25°C) Characteristic Symbol Collector-emitter breakdown voltage BVCEO IC=1mA, IB=0 50 - - V Collector cut-off current ICBO VCB=60V, IE=0 - - 0.1 µA Emitter cut-off current IEBO VEB=5V, IC=0 - - 0.1 µA DC current gain hFE VCE=6V, IC=2mA 120 - 240 - IC=100mA, IB=10mA - - 0.25 V VCE=6V, IC=2mA - 0.67 0.9 V 80 - - MHz - 2 3.5 pF Collector-emitter saturation voltage VCE(sat) Base-emitter voltage VBE Transition frequency fT Collector output capacitance Cob Test Condition VCE=10V, IC=1mA VCB=10V, IE=0, f=1MHz KSD-T0C056-000 Min. Typ. Max. Unit 2 STS5343N Electrical Characteristic Curves Fig. 2 IC - VBE Fig. 1 PC - Ta Fig. 4 hFE - IC Fig. 3 IC - VCE ㎂ Fig. 5 VCE(sat) - IC Fig. 6 hFE - IC KSD-T0C056-000 3 STS5343N These AUK products are intended for usage in general electronic equipments(Office and communication equipment, measuring equipment, domestic electrification, etc.). Please make sure that you consult with us before you use these AUK products in equipments which require high quality and/or reliability, and in equipments which could have major impact to the welfare of human life(atomic energy control, airplane, spaceship, traffic signal, combustion central, all types of safety device, etc.). AUK cannot accept liability to any damage which may occur in case these AUK products were used in the mentioned equipments without prior consultation with AUK. KSD-T0C056-000 4