APDS-9101 Integrated Reflective Sensor Data Sheet Description Features APDS-9101 is a low cost, integrated reflective sensor that is designed to provide high switching speed for object detection or proximity sensing applications. It is an integrated module that specially incorporates an infrared LED and a phototransistor in a single integrated module. • Fast Switching Speed Application Support Information • Detection distance from near zero to 12mm • Low cost and 4 pin SMD package Height – 6.3 mm Width – 4.5 mm Depth - 8.7 mm The Application Engineering Group is available to assist you with the application design associated with APDS9101. You can contact them through your local sales representatives for additional details • Operating temperature : -25˚C to 85˚C Ordering Information APDS-9101 is widely suitable to provide reflective object/ postion detection or high speed non-contact switching applications in industrial, consumer and other markets. Part Number Packaging Type Package Quantity APDS-9101-L21 Tape and Reel 4-pins SMD package 8000 • Lead-free and RoHS Compliant Applications • Industrial – Automatic vending machines, amusement/ gaming machines, coin/bill validators etc • Office automation – Printers, Copiers etc • Consumer – Coffee machines, beverage dispensing machines etc Absolute Maximum Ratings (Ta=25˚C) Parameter Symbol Max Rating Unit Power Dissipation PD 90 mW Peak Forward Current (300pps, 10 μs pulse) ICP 1 A Continuous Forward Current IF 60 mA Reverse Voltage VR 5 V Power Dissipation PC 100 mW Collector-Emitter Voltage VCEO 30 V Emitter-Collector Voltage VECO 5 V Collector Current IC 20 mA Operating Temperature Range TOP -25˚C to +85˚C Storage Temperature Range TSTG -40˚C to 100˚C Lead Soldering Termperature (1.6mm(0.063 ” ) Form Case) TS 260˚C for 5 seconds Input Diode Output Phototransistor Electrical / Optical Characteristics (Ta=25˚C) Parameter Symbol Min. Typ. Max. Unit Test Condition 1.2 1.6 V IF=20mA Input Diode Forward Voltage VF Reverse Current IR 100 μA VR= 5V ICEO 100 nA VCE= 10V Collector-Emitter Saturation Voltage VCE(SAT) 0.4 V IC= 0.5mA IF= 20mA On State Collector Current IC(ON) 750 1150 μA IC(ON) 1090 1430 μA IC(ON) 1370 1770 μA VCE= 5V, IF= 20mA D = 3.5mm (90% Reflective White Paper) Output Phototransistor Collector-Emitter Dark Current Coupler Response Time (Rise Time) TR 3 15 μs Response Time(Fall Time) TF 4 20 μs VCE= 5V, IC= 2mA RL= 100Ω BIN A BIN B BIN C APDS-9101 Package Outline NOTES: 1. All dimensions are in millimeters(inches) 2. Tolerance is ± 0.25mm(0.010”) unless otherwise noted I/O Pins Configuration Table APDS-9101 Block Diagram Pin 2 Pin 1 Pin 3 Pin 4 The electrical pin assignments are depicted in the below table. Pin Function Description 1 Anode Led Anode 2 Cathode Led Cathode 3 Collector Phototransistor Collector 4 Emitter Phototransistor Emitter APDS-9101 Taping Dimensions Soldering Area APDS-9101 Performance Charts Typical Electrical/Optical Characteristics Curves (Ta=25˚C unless otherwise indicated) Figure 1. Power Dissipation vs. Ambient Temperature Figure 2. Forward Current vs. Forward Voltage Figure 3. Collector Current vs. Forward Voltage Figure 4. Collector Current vs. Collector-emitter Voltage Figure 5. Collector Current vs. Ambient Temperature Figure 6. Collector-emitter Saturation Voltage vs. Ambient Temperature For product information and a complete list of distributors, please go to our web site: www.avagotech.com Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies, Limited in the United States and other countries. Data subject to change. Copyright © 2007 Avago Technologies Limited. All rights reserved. AV02-0029EN - January 22, 2007