AVAGO APDS-9103

APDS-9103
Integrated Reflective Sensor
Data Sheet
Description
Features
The APDS-9103 is a low cost, integrated module consisting of an infrared LED and a phototransistor in a single integrated package. It is capable of supporting detection
distance from near 0 to 10mm. APDS-9103 is specially
targeted at office automation products such as printers
and fax and optoelectronic switches as well.
• Package size
Height – 6 mm
Width – 4 mm
Depth – 10.6 mm
• Detection range of near 0mm to 10mm
• Operating temperature : -25˚C to 85˚C
Application Support Information
The Application Engineering Group is available to assist
you with the application design associated with APDS9103. You can contact them through your local sales representatives for additional details
Ordering Information
Part Number
Package
Quantity
APDS-9103-L22
4 pin leads
2500
• Lead-free and RoHS Compliant
Applications
APDS-9103 is widely suitable to provide reflective object
or proximity sensing in industrial, office automation and
consumer markets
• Industrial – Automatic vending machines, amusement/
gaming machines, coin/bill validators etc
• Office automation – Printers, Copiers etc
• Consumer – Coffee machines, beverage dispensing
machines etc
Absolute Maximum Ratings (Ta=25˚C)
Parameter
Symbol
Max Rating
Unit
Power Dissipation
PD
75
mW
Peak Forward Current
( 300pps, 10 μs pulse)
ICP
1
A
Continuous Forward Current
IF
60
mA
Reverse Voltage
VR
5
V
Power Dissipation
Pc
100
mW
Collector-Emitter Voltage
VCEO
30
V
Emitter-Collector Voltage
VECO
5
V
Collector Current
IC
20
mA
Operating Temperature Range
TOP
-25˚C to +85˚C
Storage Temperature Range
TSTG
-40˚C to +100˚C
Lead Soldering Termperature
(1.6mm(0.063 ” ) Form Case)
TS
260˚C for 5 seconds
Input Diode
Output Phototransistor
Electrical / Optical Characteristics (Ta=25˚C)
Parameter
Symbol
Min.
Typ.
Max.
Unit
Test Condition
1.2
1.6
V
IF=20mA
Input Diode
Forward Voltage
VF
Reverse Current
IR
100
μA
VR= 5V
ICEO
100
nA
VCE= 10V
Collector-Emitter Saturation Voltage
VCE(SAT)
0.4
V
IC= 0.05mA
IF= 20mA
On State Collector Current
IC(ON)
100
300
μA
IC(ON)
260
650
μA
IC(ON)
400
1200
μA
VCE= 5V
IF= 20mA
D = 3.0mm
Output Phototransistor
Collector-Emitter Dark Current
Coupler
Response Time (Rise Time)
TR
3
15
μs
Response Time(Fall Time)
TF
4
20
μs
VCE= 5V
IC= 2mA
RL= 100Ω
BIN A
BIN B
BIN C
APDS-9103 Package Outline
NOTES:
1. All dimensions are in millimeters(inches)
2. Tolerance is ± 0.25mm(0.010”) unless otherwise noted
APDS-9103 Block Diagram
Pin 1
Pin 2
I/O Pins Configuration Table
Pin 3
Pin 4
The electrical pin assignments are depicted in the below
table.
Pin
Function
Description
1
Emitter
Phototransistor Emitter
2
Collector
Phototransistor Collector
3
Anode
LED Anode
4
Cathode
LED Cathode
Test Circuit and Waveforms
Input
RD
Vcc
Input
RL
Output
Output
90%
10%
GND
tr
td
90% Reflectance White Paper
d
tf
ts
APDS-9103 Performance Charts
Typical Electrical/Optical Characteristics Curves (Ta=25˚C unless otherwise indicated)
Figure 1. Power Dissipation vs. Ambient Temperature
Figure 2. Forward Current vs. Forward Voltage
Figure 3. Collector Current vs. Collector-emitter Voltage
Figure 4. Collector Current vs. Ambient Temperature
Figure 5. Collector-emitter Saturation Voltage vs. Ambient Temperature
Figure 6. Relative Collector Current vs. Object Distance
Figure 7. Response Time vs. Load Resistance
For product information and a complete list of distributors, please go to our web site:
www.avagotech.com
Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies, Limited in the United States and other countries.
Data subject to change. Copyright © 2007 Avago Technologies Limited. All rights reserved.
AV02-0007EN - January 22, 2007