APDS-9104 Integrated Reflective Sensor Data Sheet Features Description The APDS-9104 is a low cost, fully integrated module targeting at object sensing or non-contact switching applications. The module consists of an infrared LED and a phototransistor in a single integrated package. It is capable of supporting detection distance from near 0 to 12mm. Application Support Information • For Direct PC Board or dual-in-line socket mounting • Fast switching speed • Detection range of near 0 to 12mm • Package size Height – 5.6 mm Width – 4.5 mm Depth – 8.7 mm The Application Engineering Group is available to assist you with the application design associated with APDS9104. You can contact them through your local sales representatives for additional details • Operating temperature : -25˚C to 85˚C Ordering Information APDS-9104 is widely suitable to provide a reflective high speed object detection or non-contact switching suitable for various applications in industrial, office automation, consumer and other applications. Part Number Package Quantity APDS-9104-L22 4-leads 2500 • Lead-free and RoHS Compliant Applications • Industrial – Automatic vending machines, amusement/ gaming machines, coin/bill validators etc • Office automation – Printers, Copiers etc • Consumer – Coffee machines, beverage dispensing machines etc Absolute Maximum Ratings (Ta=25˚C) Parameter Symbol Max Rating Unit Power Dissipation PD 90 mW Peak Forward Current (300pps, 10 μs pulse) ICP 1 A Continuous Forward Current IF 60 mA Reverse Voltage VR 5 V Power Dissipation PC 100 mW Collector-Emitter Voltage VCEO 30 V Emitter-Collector Voltage VECO 5 V Collector Current IC 20 mA Operating Temperature Range TOP -25˚C to +85˚C Storage Temperature Range TSTG -40˚C to +100˚C Lead Soldering Termperature (1.6mm(0.063 ” ) Form Case) TS 260˚C for 5 seconds Input Diode Output Phototransistor Electrical / Optical Characteristics (Ta=25˚C) Parameter Symbol Min. Typ. Max. Unit Test Condition 1.2 Input Diode Forward Voltage VF 1.6 V IF=20mA Reverse Current IR 100 μA VR= 5V ICEO 100 nA VCE= 10V Collector-Emitter Saturation Voltage VCE(SAT) 0.4 V IC= 0.2mA, IF= 20mA On State Collector Current IC(ON) 200 400 μA IC(ON) 300 600 μA IC(ON) 500 1000 μA IC(ON) 800 1600 μA VCE= 5V IF= 20mA D = 3.5m (90% Reflective White Paper) Output Phototransistor Collector-Emitter Dark Current Coupler BIN A BIN B BIN C BIN D APDS-9104 Package Outline NOTES: 1. All dimensions are in millimeters(inches) 2. Tolerance is ± 0.25mm(0.010”) unless otherwise noted 3. Lead spacing is measured where the leads emerge from the package I/O Pins Configuration Table APDS-9104 Block Diagram Pin 1 Pin 2 Pin 3 Pin 4 The electrical pin assignments are depicted in the below table. Pin function Description 1 Cathode LED Cathode 2 Anode LED Anode 3 Collector Phototransistor Collector 4 Emitter Phototransistor Emitter APDS-9104 Performance Charts Typical Electrical/Optical Characteristics Curves (Ta=25˚C unless otherwise indicated) Figure 1. Normalized Collector Current vs. Object Distance Figure 2. Collector Current vs. Collector Voltage Figure 3. Rise and Fall time vs. Load Resistance Figure 4. Forward Current vs. Collector-emitter Saturation Voltage For product information and a complete list of distributors, please go to our web site: www.avagotech.com Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies, Limited in the United States and other countries. Data subject to change. Copyright © 2007 Avago Technologies Limited. All rights reserved. AV02-0008EN - January 22, 2007