HDSP-B0xE 18:88 and 88:88 0.56" Four Digit GaP HER Seven Segment Display Data Sheet Description Features The 18:88 and 88:88 0.56" Four Digit Seven Segment Displays have surface painted in neutral gray for enhanced on/off contrast. All devices are available in either common anode or common cathode configuration with untinted segments. • Excellent appearance • Evenly illuminated segments • Gray face for optimum on/off contrast • Choice of colors: HER • Choice of character size: 0.56 inch Package Dimensions 88:88 0.56" Four Digit Display FRONT SIDE RIGHT SIDE 2 – ∅1.70 (0.067) 7.80 (0.307) PIN 12 + 10.00 PIN 8 A + 6.00 (0.236) 14.22 (0.560) + + PIN 1 PIN 7 15.24 (0.600) 19.10 (0.752) DIGIT 1 51.20 (2.016) BOTTOM SIDE 7.00 (0.276) 8.00 (0.315) 0.50 (0.020) 4.00 (0.157) NOTE: ALL DIMENSIONS ARE IN MILLIMETERS (INCHES). UNLESS OTHERWISE STATED, TOLERANCES ARE ± 0.25 mm. HDSP-B0xG Pkg Dimen a C D 12.7 x 3 = 38.10 (1.500) 2.54 x 6 = 15.24 (0.600) F E B G A F E A B DP3 F G G BF C D DP2 DIGIT 2 E A D DIGIT 3 B G CE C D DIGIT 4 Package Dimensions 18:88 0.56" Four Digit Display FRONT SIDE RIGHT SIDE 2 – ∅1.70 (0.067) 7.80 (0.307) PIN 12 + 10.00 PIN 8 + 6.00 (0.236) 14.22 (0.560) + + PIN 1 PIN 7 15.24 (0.600) 19.10 (0.752) BOTTOM SIDE 7.00 (0.276) 8.00 (0.315) 0.50 (0.020) 4.00 (0.157) NOTE: ALL DIMENSIONS ARE IN MILLIMETERS (INCHES). UNLESS OTHERWISE STATED, TOLERANCES ARE ± 0.25 mm. Pin Configuration F E A A B DP3 F G G BF C D 51.20 (2.016) Pin 1 2 3 4 5 6 7 8 9 10 11 12 C DIGIT 1 12.7 x 3 = 38.10 (1.500) 2.54 x 6 = 15.24 (0.600) B Function HDSP-B01E/B03E Anode E Anode D Anode DP Anode C Anode G Digit 4 Common Cathode Anode B Digit 3 Common Cathode Digit 2 Common Cathode Anode F Anode A Digit 1 Common Cathode HDSP-B0xG Pkg Dimen b HDSP-B02E/B04E Cathode E Cathode D Cathode DP Cathode C Cathode G Digit 4 Common Anode Cathode B Digit 3 Common Anode Digit 2 Common Anode Cathode F Cathode A Digit 1 Common Anode DP2 DIGIT 2 E A CE D DIGIT 3 B G C D DIGIT 4 Internal Circuit Diagram HDSP-B01E (Common Cathode) DIGIT 1 12 B DIGIT 2 9 DIGIT 3 8 DIGIT 4 6 C A 11 B 7 C 4 D 2 E 1 F 10 G 5 DP 3 HDSP-B0xG Circuit Diag – Cathode HDSP-B02E (Common Anode) DIGIT 1 12 B DIGIT 2 9 DIGIT 3 8 C A 11 B 7 C 4 D 2 E 1 F 10 G 5 DP 3 HDSP-B0xG Circuit Diag – Anode DIGIT 4 6 Internal Circuit Diagram HDSP-B03E (Common Cathode) DIGIT 1 12 DIGIT 2 9 A 11 B 7 C 4 D 2 E 1 F 10 G 5 DIGIT 3 8 DIGIT 4 6 DIGIT 3 8 DIGIT 4 6 DP 3 HDSP-B0xG Circuit Diag – Cathode HDSP-B04E (Common Anode) DIGIT 1 12 DIGIT 2 9 A 11 B 7 C 4 D 2 E 1 F 10 G 5 DP 3 HDSP-B0xG Circuit Diag – Anode Devices HDSP- Description B01E 88:88 0.56" HER 4 Digit, Untinted, Common Cathode, Display 18:88, Gray Color Surface B02E 88:88 0.56" HER 4 Digit, Untinted, Common Anode, Display 18:88, Gray Color Surface B03E 88:88 0.56" HER 4 Digit, Untinted, Common Cathode, Display 88:88, Gray Color Surface B04E 88:88 0.56" HER 4 Digit, Untinted, Common Anode, Display 88:88, Gray Color Surface Part Numbering System 5 0 8 2 -X X X X-X X X X X H D S P -X X X X-X X X X X Mechanical Options[1] 00: No Mechanical Option Color Bin Options[1,2] 0: No Color Bin Limitation Maximum Intensity Bin[1,2] 0: No Maximum Intensity Bin Limitation Minimum Intensity Bin[1,2] 0: No Minimum Intensity Bin Limitation Device Configuration/Color[1] E: High Efficiency Red Device Specific Configuration[1] Refer to Respective Datasheet Package[1] Refer to Respective Datasheet Notes: 1. For codes not listed in the figure above, please refer to the respective datasheet or contact your nearest Avago representative for details. 2. Bin options refer to shippable bins for a part number. Color and Intensity Bins are typically restricted to 1 bin per tube (exceptions may apply). Please refer to respective datasheet for specific bin limit information. Absolute Maximum Ratings Description Average Power per Segment or DP Peak Forward Current per Segment or DP DC Forward Current per Segment or DP Operating Temperature Range Storage Temperature Range Reverse Voltage per Segment or DP Wavesoldering Temperature for 3 seconds 1.59 mm below body HER 65 100 25 –40 to +105 –40 to +105 5 250 Units mW mA mA ˚C ˚C V ˚C Note: 1. Derate above 40˚C at 0.33 mA/˚C for HER. Electrical/Optical Characteristics at TA = 25˚C Device Series HDSP- B01E B02E B03E B04E Parameter Luminous Intensity/Segment (Digit Average) Forward Voltage/Segment or DP Peak Wavelength Dominant Wavelength Luminous Intensity Matching Ratio Reverse Current Symbol IV Min. 3200 VF Typ. Max. 5500 Units µcd Test Conditions IF = 10 mA 2.05 V IF = 20 mA 2.60 λPEAK 632 nm λd 622 nm IV-M 2:1 IR 100 Notes: 1. Typical specification for reference only. Do not exceed absolute maximum ratings. 2. The dominant wavelength, λd, is derived from the CIE chromaticity diagram and is that single wavelength which defines the color of the device. Intensity Bin Limits (Tolerance ± 10%) Rank L M Symbol IV IV Condition IF = 10 mA IF = 10 mA Min. 3200 5050 Max. 5050 8000 Unit µcd µcd µA IF = 20 mA IF = 20 mA IF = 10 mA VR = 5 V 25 HIGH EFFICIENCY RED (HER) 20 15 10 5 0 0 20 40 60 80 100 120 TA – AMBIENT TEMPERATURE – °C Figure 1. Maximum allowable average or DC current HDSP-B0xE fig 1 vs. ambient temperature. IF – FORWARD CURRENT PER SEGMENT – mA MAXIMUM DC CURRENT PER SEGMENT – mA 30 Contrast Enhancement 120 For information on contrast enhancement, please see Application Note 1015. 100 80 Soldering/Cleaning 60 40 20 0 0 0.5 1.0 1.5 2.0 2.5 3.0 VF – FORWARD VOLTAGE – V Figure 2. Forward current vs. forward voltage. Cleaning agents from the ketone family (acetone, methyl ethyl ketone, etc.) and from the chlorinated hydrocarbon family (methylene chloride, trichloroethylene, carbon tetrachloride, etc.) are not recommended for cleaning LED parts. All these various solvents attack or dissolve the encapsulating epoxies used to form the package of plastic LED parts. HDSP-B0xE fig 2 1.2 RELATIVE EFFICIENCY (NORMALIZED TO 1 AT 10 mA) RELATIVE LUMINOUS INTENSITY (NORMALIZED TO 1 AT 10 mA) 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0 0 5 10 15 20 25 30 35 FORWARD CURRENT PER SEGMENT – mA Figure 3. Relative luminous intensity vs. DC forward current. 1.0 0.8 0.6 0.4 0.2 0 0 5 10 15 20 25 30 35 40 45 50 PEAK FORWARD CURRENT PER SEGMENT – mA Figure 4. Relative efficiency (luminous intensity per HDSP-B0xE fig 4 unit current) vs. peak current. HDSP-B0xE fig 3 For product information and a complete list of distributors, please go to our website: www.avagotech.com Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies Limited in the United States and other countries. Data subject to change. Copyright © 2006 Avago Technologies Limited. All rights reserved. Obsoletes 5988-3569EN AV02-0568EN - July 4, 2007