PW036XS3 Version : 1.1 TECHNICAL MODEL SPECIFICATION NO. : PW036XS3 Customer’s Confirmation Customer Date By PVI’s Confirmation Confirmed By Prepared By FOR MORE INFORMATION: AZ DISPLAYS, INC. 75 COLUMBIA, ALISO VIEJO, CA, 92656 Http://www.AZDISPLAYS.com Date : Jan. 10 , 2005 This technical specification is subject to change without notice. Please return 1 copy with your signature on this page for approval. The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:1 PW036XS3 TECHNICAL SPECIFICATION CONTENTS NO. ITEM PAGE - Cover 1 - Contents 2 1 Application 3 2 Features 3 3 Mechanical Specifications 3 4 Mechanical Drawing of TFT-LCD module 4 5 Input / Output Terminals 5 6 Pixel Arrangement and Input Connector Pin No. 6 7 Absolute Maximum Ratings 7 8 Electrical Characteristics 7 9 Power On Sequence 17 10 Optical Characteristics 17 11 Handling Cautions 20 12 Reliability Test 21 13 Block Diagram 22 14 Packing 23 - Revision History 25 Appendix 26 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:2 PW036XS3 1. Application This technical specification applies to 3.6” color TFT-LCD module , PW036XS3. The applications of the panel are car TV, portable DVD, GPS, multimedia applications and other AV systems.. 2. Features . Amorphous silicon TFT-LCD panel with LED Backlight unit. . Compatible with NTSC & PAL system . Pixel in stripe configuration . Slim and compact . Image Reversion : Up/Down and Left/Right . Support Multi Video Display Mode (With PVI timing controller : PVI-1004C) 3. Mechanical Specifications Parameter Screen Size Display Format Active Area Dot Pitch Pixel Configuration Outline Dimension Surface Treatment Weight Specifications 3.6 (16:9 diagonal) 960×234 78.24(H)× 45.864(V) 0.0815 (H)×0.196 (V) Stripe 89.47(W) × 58.09(H) × 3.6(D)(typ.) Anti – Glare 40±5 Unit inch dot mm mm mm g The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:3 PW036XS3 PI TAPE NO BENDING AREA 4. Mechanical Drawing of TFT-LCD Module The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:4 PW036XS3 5. Input / Output Terminals TFT-LCD Module Connector FPC Down Connect , 30Pins , Pitch : 0.5 mm Pin No Symbol I/O Description 1 GLED1 I Ground for LED backlight 2 VLED1 I Supply voltage of LED backlight 3 GLED2 I Ground for LED backlight 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 VLED2 GND VCC VEE VGH STVD STVU CKV U/D OE3 OE2 OE1 VCOM STHL VSS2 VR VG VB VSS1 VDD2 CPH1 CPH2 CPH3 VDD1 R/L OEH STHR I I I I I/O I/O I I I I I I I/O I I I I I I I I I I I/O Supply voltage of LED backlight Ground for logic circuit Supply voltage of logic control circuit for gate driver Negative power for gate driver Positive power for gate driver Vertical start pulse Vertical start pulse Shift clock for gate driver Up / Down control for gate driver Output enable for gate driver Output enable for gate driver Output enable for gate driver Common electrode voltage Start pulse for source driver Ground for analog circuit Video Input R Video Input G Video Input B Ground for digital circuit Supply power of analog circuit Sampling and shift clock for source driver Sampling and shift clock for source driver Sampling and shift clock for source driver Supply power for digital circuit Left / Right control for source driver Output enable for source driver Start pulse for source driver Note 5-1 U/D STVD Vcc Input GND Output STVU output input scanning direction down to up up to down Note 5-2 R/L STHL Vcc output GND input STHR input output scanning direction left to right right to left Remark Note 5-8 Note 5-8 Note 5-3 Note 5-4 Note 5-5 Note 5-1 Note 5-1 Note 5-2 Note 5-6 Note 5-7 Note 5-2 Note 5-2 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:5 PW036XS3 The definitions of Note 5-1,5-2 U/D(PIN 12)=Low R/L(PIN 28)=High U/D(PIN 12)=High R/L(PIN 28)=Low Note 5-3 : VCC TYP.＝+3.3V Note 5-4 : VEE TYP.＝-12V Note 5-5 : VGH TYP.＝+17V Note 5-6 : VDD2 TYP.＝+5V Note 5-7 : VDD1 TYP.＝+3.3V Note 5-8 : ILED1 , ILED2 TYP.=20mA 6. Pixel Arrangement and Input Connector Pin NO. Line 1 Line 960 Row 1 R G B R G B R G B R G B Row 2 R G B R G B R G B R G B Row 3 R G B R G B R G B R G B Row 4 R G B R G B R G B R G B Row 233 R G B R G B R G B R G B Row 234 R G B R G B R G B R G B Gate driver Source driver Input FPC Pin 30 Pin 1 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:6 PW036XS3 7. Absolute Maximum Ratings : The followings are maximum values , which if exceeded, may cause faulty operation or damage to the unit. Symbol VDD2 MIN. -0.3 GND = 0 V，Ta = 25 ℃ MAX. Unit Remark +5.8 V VDD1 -0.3 +7.0 V VCC -0.3 +6.0 V VGH-VEE -0.3 +40.0 V H Level VGH -0.3 +25.0 V L Level VEE -16 +0.3 V -0.2 VDD1+0.2 V Storage Temperature -10 +70 ℃ Operation Temperature 0 +60 ℃ Parameter Supply Voltage For Source Driver Supply Voltage For Gate Driver Analog Signal Input Level VR,VG,VB Note 7-1 Note 7-2 Notes 7-1 : Analog Input Voltage means VR,VG,VB. Notes 7-2 : Operating Temperature define that contrast, response time, other display optical character are Ta=+25℃. 8. Electrical Characteristics 8-1) Operating Condition Parameter Supply Voltage For Source Driver Symbol MIN. Analog Logic H level VDD2 VDD1 VGH +4.5 +3.0 +15 Typ. +5.0 +3.3 +17 MAX. +5.5 +3.6 +19 Unit V V V L level VEE DC -13 -12 -10.5 V Supply Voltage For Gate Driver VEE AC Logic VCC +6.0 +3.0 +3.3 +3.6 V +4.2 V Analog Signal input Level ViAC +4.0 (VR , VG , VB) ViDC 2.5 Digital input voltage Digital output voltage H level L level H level L level VIH VIL VOH VOL 0.7 VDD1 -0.3 0.7 VDD1 -0.3 VCOM AC - VP-P - V VDD1 0.3 VDD1 VDD1 0.3 VDD1 V V V V Remark DC Component of VEE AC Component of VEE Note8-1 AC Compoment Note8-3 DC Compoment Note8-3 AC Component VP-P of V COM VCOM DC Component 1.2 V VCOM DC of VCOM Note 8-2 Note 8-1 :The typical value of Logic circuit supply power VCC & VDD1 is 3.3 ± 0.3V , if customer choice 5.0 ± 0.5V , the panel power consumption will increase about 10mW . Note 8-2 :PVI strongly suggests that the VCOM DC level shall be adjustable , and the adjustable level range is 1.2V±1V , every module’s VCOM DC level shall be carefully adjusted to show a best image performance. +6.0 - The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:7 PW036XS3 Note 8-3: Both NTSC and PAL system Video Signal input waveform is based on 8 steps gray scale. White Black White Black 4.0±0.2V White White 8-2) Recommended driving condition for LED backlight Parameter Supply voltage of LED backlight Supply current of LED backlight Backlight Power Consumption Symbol Min TYP MAX 9 9.6 11.4 VLED1 VLED2 ILED1 20 ILED2 PLED 360 384 456 GND = 0 V， Ta = 25 ℃ Unit Remark V IL = 20 mA mA Note 8-4 mW Note 8-5 Note 8-4 : LED B/L applied information , please refer to the appendix at the end . Note 8-5 : PLED = VLED1* ILED1 + VLED2* ILED2 . VLED1 GLED1 VLED2 GLED2 8-3) Power Consumption Parameter Supply current for Gate Driver (Hi level) Symbol Conditions TYP. MAX Unit Remark IGH VGH ＝+17V 0.08 0.12 mA Supply current for Gate Driver (Low level) IEE VEE ＝-12V 0.3 0.45 mA VEE center voltage Supply current for Source Driver(Digital) IDD1 mA VDD1＝+3.3V 1.2 3.0 Supply current for Source Driver(Analog) IDD2 VDD2＝+5V 10.0 mA Supply current for Gate Driver (Digital) ICC VCC ＝+3.3V 0.005 0.008 mA LCD Panel Power Consumption Backlight Power Consumption Total Power Consumption PLED 7.0 44.3 68.3 mW 384 456 mW 428.3 524.3 mW The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:8 PW036XS3 8-4) Timing Characteristics Of Input Signals Characteristics Rising time Falling time High and low level pulse width CPH pulse duty STH setup time STH hold time STH pulse width STH period OEH pulse width Sample and hold disable time OEV pulse width CKV pulse width Clean enable time Horizontal display timing range STV setup time STV hold time STV pulse width Horizontal lines per field Vertical display start Vertical display timing range VCOM rising time VCOM falling time VCOM delay time RGB delay time Symbol tr tf tCPH tCWH tSUH tHDH tSTH tH tOEH tDIS1 tOEV tCKV tDIS2 tDH tSUV tHDV tSTV tV tSV tDV trCOM tfCOM tDCOM tDRGB Min. 147 30 20 20 61.5 400 400 256 Typ. 156 50 1 63.5 1.6 4.4 12 32 6 320 262 3 234 - Max. 10 10 166 70 65.5 1 268 5 5 3 1 Unit ns ns ns % ns ns tCPH μs μs μs μs μs μs tCPH/3 ns ns tH tH tH tH μs μs μs μs Remark CPH1~CPH3 CPH1~CPH3 STHR,STHL STHR,STHL STHR,STHL STHR,STHL OEH OEV CKV STVU,STVD STVU,STVD The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:9 PW036XS3 10% tr 90% 90% tf 10% 8-5) Signal Timing Waveforms CPH3 (L) CPH2 (L) CPH1 STHL(R) 50% tCWH 50% tCPH tSUH tSTH tHDH g n i m i t k c o l c g n i l p m a S 1 8 . g i F The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:10 Fig. 8-2 Horizontal display timing range CPH1 Output (STHR/STHL) Input (STHL/STHR) tDH PW036XS3 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:11 Fig. 8-3 (a) Horizontal timing VIAC VEE DC VEE Blank V(R,G,B) VIDC VC DC VCOM CKV OE 1,2,3 STHL(R) OEH (HSY) Black 1H VIA tH White Blank Black VEE AC VC AC White PW036XS3 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:12 V(R,G,B) V GL DC GL V VCOM CKV OE 1, 2, 3 STHL(R) OEH (HSY) Fig. 8-3 (b) Detail horizontal timing Note : The falling edge of OEV should be synchronized with the falling edge of OEH tDRGB trCOM tDIS2 tOEV 10% 90% 50% tOEH tDCOM tCKV tDIS1 1H V GL AC tSTH 90% 10% tfCOM PW036XS3 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:13 Fig. 8-4 Vertical shift clock timing CKV STVU(D) t S1V 1H t H2V tCKV PW036XS3 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:14 PW036XS3 VCOM (Even field) VCOM (Odd field) STVU (VSY) (HSY) V(R,G,B) Display on panel first line Fig. 8-5 (a) Vertical timing (From Up to Down) tsv Vertical timing (From up to down) The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:15 PW036XS3 VCOM (Even field) VCOM (Odd field) STVD (VSY) (HSY) V(R,G,B) Display on panel first line Fig. 8-5 (b) Vertical timing (From Down to Up) tsv Vertical timing (From down to up) The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:16 PW036XS3 9. Power On Sequence The Power on Sequence only effect by VCC,VSS,VDD,VEE and VGH, the others do not care. VGH VDD,VCC VSS(0V) VEE OFF OFF ON T1 T3 Logic signal RGB-Video signal T2 T4 1) 10ms≦T1<T2 2) 0ms<T3≦T4≦10ms 10. Optical Characteristics 10-1) Specification: Parameter Viewing Angle Symbol Horizontal θ21, θ22 Vertical θ11 θ12 Contrast Ratio Response time CR Rise Fall Tr Tf Uniformity Condition CR≧10 At optimized Viewing angle θ=0° U MIN. 45 30 10 TYP. MAX. 55 --35 --15 --- 200 350 --- ----- 10 25 20 50 70 80 Ta = 25℃ Unit Remarks deg deg Note 10-1 deg Note 10-2 ms ms Note 10-4 cd/㎡ 250 Note 10-3 0.30 0.33 0.33 0.36 Chromaticity 10000 hrs Note 10-5 LED Backlight Life (+25℃) Note 10-5 : Constant current 20mA for each loop , and the center brightness must more than 50% of initial brightness value . Brightness White x y θ=0° θ=0° 200 0.27 0.30 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:17 PW036XS3 Note 10-1 : The definitions of viewing angles Luminance when Testing point is White Luminance when Testing point is Black (Testing configuration see 10-2 ) Contrast Ratio is measured in optimum common electrode voltage. Note 10-2 : CR ＝ Note 10-3 : :1. Topcon BM-7(fast) luminance meter 1.0°field of view is used in the testing (after 10 minutes operation). Note 10-4 : The definition of response time : White Black White 100% 90% Brightness 10% 0% Tr Tf The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:18 PW036XS3 10-2) Testing configuration BM-7(fast) Caution: 1. Environmental illumination≦1 lux 2. Before test CR, Vcom voltage must be adjusted carefully to get the best 500mm CR. R,G,B signal input Pattern generator y LCD Backlight LCD Display Testing Point Pattern A y R, G, B Waveform of Pattern A at Testing Point 63.6μs Testing Point Pattern B RGB waveform Vcom 63.6μs Vw=1.3V +/- 0.2V y R, G, B Waveform of Pattern B at Testing Point 63.6μs 63.6μs RGB waveform Vcom Vb=5.0V +/- 0.2V The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:19 PW036XS3 11. Handling Cautions 11-1) Mounting of module a) Please power off the module when you connect the input/output connector. b) Please connect the ground pattern of the inverter circuit surely. If the connection is not perfect, some following problems may happen possibly. 1.The noise from the backlight unit will increase. 2.The output from inverter circuit will be unstable. 3.In some cases a part of module will heat. c) Polarizer which is made of soft material and susceptible to flaw must be handled carefully. d) Protective film (Laminator) is applied on surface to protect it against scratches and dirt. It is recommended to peel off the laminator before use and taking care of static electricity. 11-2) Precautions in mounting a) Wipe off water drops or finger grease immediately. Long contact with water may cause discoloration or spots. b) TFT-LCD module uses glass which breaks or cracks easily if dropped or bumped on hard surface. Please handle with care. c) Since CMOS LSI is used in the module. So take care of static electricity and earth yourself when handling. 11-3) Others a) Do not expose the module to direct sunlight or intensive ultraviolet rays for many hours. b) Store the module at a room temperature place. c) The voltage of beginning electric discharge may over the normal voltage because of leakage current from approach conductor by to draw lump read lead line around. d) If LCD panel breaks, it is possibly that the liquid crystal escapes from the panel. Avoid putting it into eyes or mouth. When liquid crystal sticks on hands, clothes or feet. Wash it out immediately with soap. e) Observe all other precautionary requirements in handling general electronic components. The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:20 PW036XS3 12. Reliability Test No 1 2 3 4 5 6 Test Item High Temperature Storage Test Low Temperature Storage Test High Temperature Operation Test Low Temperature Operation Test High Temperature & High Humidity Operation Test Thermal Cycling Test (non-operating) 7 Vibration test (non-operating) 8 Shock Test(non-operating) 9 Electrostatic Discharge Test (non-operating) Test Ta = +70℃, 240 hrs Ta = -10℃, 240 hrs Ta = +60℃, 240 hrs Ta = 0℃, 240 hrs Condition Ta = +50℃, 80%RH, 240 hrs -10℃ ← → +70℃ , 200 Cycles 30 min 30 min Frequency : 10 ~ 55Hz Amplitude : 1mm , sweep time : 11 mins Test period : 6 cycles for each direction of X,Y, Z 100G , 6ms , 3cycles for each direction of X,Y,Z 200pF, 0Ω Machine mode = ±200V 1 time / each terminal Ta: ambient temperature Note : The protective film must be removed before temperature test. [Criteria] Under the display quality test conditions with normal operation state, there should be no change which may affect practical display function. The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:21 PW036XS3 13. Block Diagram 14.1 LCD Module Diagram LCD Panel H Driver (Source) V Driver (Gate) Back-light 30 PIN Input The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:22 PW036XS3 14. Packing The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:23 PW036XS3 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:24 PW036XS3 Revision History Rev. 1.0 1.1 Issued Date Jul. 06 , 2004 Jan.10 , 2005 Revised Contents NEW Modify : Page04 : Mechanical Drawing of TFT-LCD Module(No Bending Area) Add: Page21 : Note : The protective film must be removed before temperature test. Delete: Page21 : Indication of Lot Number Label( Oracle system induction) The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:25 PW036XS3 Appendix LED B/L Application Circuit VLED1 (Pin 02) 15 + 0.5V 0.1μF 47μF 25V LED 20K 5% 0.1μF 47μF 25V LED 20K 5% VC1 1KVR VLED2 (Pin 04) 15 + 0.5V GLED1 (Pin 01) VB1 2SC2412 VC2 1KVR 20mA , 1V 0.1μF 0.1μF VE1 2K 5% 2K 5% 49.9 Ω,1% 1/16W VB2 GLED2 (Pin 03) 2SC2412 20mA , 1V VE2 49.9 Ω,1% 1/16W The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:26