PA035XUJ Version : 1.0 TECHNICAL SPECIFICATION MODEL NO. : PA035XUJ Customer’s Approved Customer Date By PVI’s Confirmation Approved By Prepared By FOR MORE INFORMATION: AZ DISPLAYS, INC. 75 COLUMBIA, ALISO VIEJO, CA, 92656 Http://www.AZDISPLAYS.com Date : Jan 10, 2005 This technical specification is subject to change without notice. Please return 1 copy with your signature on this page for approval. The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:1 PA035XUJ TECHNICAL SPECIFICATION CONTENTS NO. ITEM PAGE - Cover 1 - Contents 2 1 Application 3 2 Features 3 3 Mechanical Specifications 3 4 Mechanical Drawing of TFT-LCD module 4 5 Input / Output Terminals 5 6 Pixel Arrangement and input connector pin NO. 7 7 Absolute Maximum Ratings 8 8 Electrical Characteristics 8 9 Power Sequence 19 10 Optical Characteristics 19 11 Handling Cautions 22 12 Reliability 23 13 Block Diagram 24 14 Packing 25 - Revision History 27 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:2 PA035XUJ 1. Application This technical specification applies to 3.5” color TFT-LCD panel. The 3.5” color TFT LCD panel is designed for camcorder, digital camera application and other electronic products which require high quality flat panel displays. 2. Features . Compatible with NTSC or PAL system . High Resolution：112,320 Dots . Optimum Viewing Direction： 6 o’clock . Up/Down and Left/Right Image Reversion 3. Mechanical Specifications Parameter Screen Size Surface Treatment Display Format Active Area Dot Pitch Pixel Configuration Outline Dimension Weight Specifications 3.5 (diagonal) Anti-Glare 480×234 72.00×50.54 0.150(W)×0.216(H) Delta 83.7(W)×68.6(H)×6.6 (D) 56±5 Unit inch dot mm mm mm g The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:3 PA035XUJ 4. Mechanical Drawing of panel: The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:4 PA035XUJ 5.Input / Output Terminals Pin No Symbol I/O Description Remark 1 STH1 I/O Start pulse for source driver Note 5-1 2 AVSS I Analog GND for source driver 3 AVDD I Analog power input for source driver 4 VB I Video Input B 5 VG I Video Input G 6 VR I Video Input R 7 VSS I Digital GND 8 VDD I Digital power input 9 CPH1 I Sampling and shift clock for source driver 10 CPH2 I Sampling and shift clock for source driver 11 CPH3 I Sampling and shift clock for source driver 12 STH2 I/O Start pulse for source driver 13 Q2H I Video input rotation control 14 INH I Output enable for source driver 15 R/L I Left/Right Control for source driver 16 VCOM I Common electrode voltage 17 VCOM I Common electrode voltage 18 XOE I Output enable for gate driver 19 CPV I Clock input for gate driver 20 U/D I Up/Down Control for gate driver 21 DIO2 I/O Vertical start pulse 22 DIO1 I/O Vertical start pulse 23 VGL I Gate off voltage(alternative every 1-H) Note 5-4 24 VEE I Gate driver negative voltage Note 5-6 25 VSS I GND 26 VCC I Logic power for gate driver Note 5-3 27 VGH I Gate on voltage Note 5-7 28 GND I Back Light Case Ground - Note 5-2 Note 5-4 Note 5-3 Note 5-1 Note 5-1 Note 5-4 Note 5-5 Note 5-1：STH1, STH2 and R/L mode R/L High(VDD) Low(0 Volt.) STH1 Input Output STH2 Output Input Remark Left to Right Right to Left Note 5-2：AVDD = +5V (Typ.) The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:5 PA035XUJ Note 5-3：VDD, VCC = +3.3V (Typ.) Note 5-4：VCOM = 6VPP. Phase of the video signal input and VCOM The relation between these values could refer to 8-1 Operating condition. 100% white Composite Video Signal pedestal R,G,B Video Signal Vi DC (VR ,VG ,VB) Vi AC VCOM VCOM DC VGL VGL DC VCOM AC VGL AC 1H 1H Fig.1 Liquid crystal transmission of the video signal input, VCOM and timing VCOM H Level L Level Video Signal Input Maximum Black White Video Signal Input Minimum White Black White : maximum transmission / Black : minimum transmission The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:6 PA035XUJ Note 5-5：DIO1, DIO2 and U/D mode U/D DIO1 DIO2 Remark High (VDD) Input Output Down to Up Low (0 Volt.) Output Input Up to Down Note 5-6：VEE = -15V (Typ.). Note 5-7：VGH = +17V (Typ.). 6. Pixel Arrangement and input connector pin NO. 1 1 G 2 3 234 B R G 4 233 2 R 5 6 7 479 480 R G B R G B R B R G B R 4 G B G 3 G B R G R B R G B G R G B R B G G B B R G R R G R G B B R 1 B B R G B 28 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:7 PA035XUJ 7. Absolute Maximum Ratings: The followings are maximum values , which if exceeded, may cause faulty operation or damage to the unit. GND = 0 V， Ta = 25 ℃ Parameter Symbol MIN. MAX. Unit Remark Supply Voltage Analog AVDD -0.3 +7.0 for Source Driver Digital VDD -0.3 +7.0 Positive VGH -0.3 +41 V Supply Voltage Negative VGL V -41 +0.3 V GH for Gate Driver VGH-VGL -0.3 +41 V VVideo -0.3 +7.3 V Notes:7-1 Analog input voltage Storage Temperature -20 +70 ℃ Operation Temperature 0 +60 Notes:7-2 ℃ Notes 7-1 : Analog Input Voltage means VR,VG,VB. Notes 7-2 : Operating Temperature define that contrast, response time, other display optical character are Ta=+25. 8. Electrical Characteristics 8-1) Operating Condition Item Symbol Min. Typ. Max. Unit VCC VDD AVDD +4.5 +3.0 +4.5 +5.0 +3.3 +5.0 +5.5 +3.6 +5.5 V V VGH +15.0 +17.0 +19.0 V VGL AC - +6.0 - VP-P VGL DC -13.0 -12.0 -10.5 V Vi AC - +4.0 +4.2 VP-P Vi DC - +2.5 - V VCOM AC - +6.0 - VP-P VCOM DC 1.1 1.3 1.5 V Digital input voltage H Level VIH +0.7 VDD - VDD V L Level VIL 0 - +0.3 VDD V Power Supply Video Signal (VR, VG, VB) VCOM Remark AC Component of VGL DC Component of VGL AC Component Note 8-2 DC Component AC Component of VCOM DC Component of VCOM Note 8-1 Note 8-1：STH1,STH2,CPH1,CPH2,CPH3,Q2H,INH,CPV,XOE,DIO1,DIO2 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:8 PA035XUJ Note 8-2：Both NTSC and PAL system Video Signal input waveform is based on 8 steps gray scale. White White Black Black 4.0±0.2V White White Black 8-2)Current Consumption (GND=AVSS=0V) Parameter Current for Driver Symbol AIDD IDD IGL ICC IGH Condition AVDD=+5V VDD=+3.3V VGL=-12V VCC=+3.3V VGH=+17V Min. - Ta= 25 ℃ Remark Typ. Max. Unit 5.2 7.7 mA 0.6 1.5 mA VGL center voltage 0.09 0.14 mA 0.0030 0.0045 mA 0.088 0.13 mA 8-3) Backlight driving & Power Consumption Pin No 1 3 Symbol VL1 VL2 Description Input terminal (Hi voltage side) Input terminal (Low voltage side) Remark Note 8-3 Note 8-3：Low voltage side of backlight inverter connects with Ground of inverter circuits. Ta= 25 ℃ Parameter Lamp voltage Lamp current Lamp frequency Kick-off voltage(25℃) Kick-off voltage(0℃) Symbol VL IL PL Vs Vs Min. 25 - Typ. 265 3 35 - Max. 65 400 520 Unit Vrms mA KHz Vrms Vrms Remark IL=3mA Note 8-4 Note 8-5 Note 8-4 : The waveform of lamp driving voltage should be as closed to a perfect SIN wave as possible. Note 8-5 : This value is not output voltage of inverter. The voltage of inverter must larger than the starting voltage. The kick-off time must larger than 1 second. 8-4) Power Consumption Parameter LCD Panel Power Consumption Backlight Lamp Power Consumption Total Power Consumption Symbol Conditions Ta= 25 ℃ TYP. Unit Remark 30.57 mW Note 8-6 0.80 W Note 8-7 0.83 W The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:9 PA035XUJ Note 8-6：The power consumption for backlight is not included. Note 8-7：Backlight lamp power consumption is calculated by IL×VL. 8-5) Input / Output Connector A) LCD Module Connector FFC Down Connector, 28 Pins Pitch：0.5 mm B) Backlight Connector JST BHR-03VS-1 Pin No.：3 Pitch：4 mm 8-6) Timing Characteristics Of Input Signals Characteristics Symbol 1Field Scanning Period t1V 1Line Scanning Period t1H Source Driver Operating Frequency fhc Signal Sampling Pulse Width tchw Signal Sampling Pulse Delay tchd Signal Sampling Pulse Width(H) tchwh Signal Sampling Pulse Delay(L) tchwl Source Start Signal Pulse Width tshw Source Start Signal Setup Time tshset Source Start Signal Hold Time tshhld Source Output Enable Pulse Width tohw Source Start Signal Rising Time tss Video Input Signal Start Point tvs Phase Difference Between OEH&CPV toc Gate Clock Period tcvw Gate Clock Pulse Width(H) tcvwh Gate Clock Pulse Width(L) tcvwl Gate Start Signal Pulse Width tsvw Gate Start Signal Setup Time tsvset Gate Start Signal Hold Time tsvhld Phase Difference Between OEH&STH tosp Phase Difference Between SYNC&OEH tohs Gate Output Enable Pulse Width toev VCOM Delay Time tDCOM RGB Delay Time tDRGB Vertical Display Start tsv Min. 1.0 200 95.3 142.9 142.9 90 20 20 1.0 1.5 10 10 10 5 5 5 - Typ. 262.5 63.5 3.14 317.7 105.9 158.8 158.8 317.7 158.8 158.8 2.0 9.8 10.0 2.3 63.5 31.7 31.7 63.5 53.2 10.3 4 1.4 2.5 3 Max. 5.0 1000 116.5 174.7 174.7 630* 48 48 126** 3 2 - Unit Remark H µs MHz ns ns tchd 12,23 ns ns ns *tshset=tshhld ns ns µs µs µs µs µs µs µs µs **tsvset=tsvhld µs µs µs µs µs µs µs tH The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:10 PA035XUJ tsvw t1V=262.5H Fig. 8-1 Vertical Start Line for NTSC 282 283 284 285 286 23 22 21 20 DIO Xout VD HD 2 3 4 5 6 7 19 (22H~256H) 1st display period 265 266 267 268 269 (285H~519H) 2nd display period 8-7) Signal Timing Waveforms The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:11 tsvw t1V=312.5H 4 3 2 1 DIO 624 625 Xout VD HD Fig. 8-1 Vertical Start Line for PAL 336 337 338 339 340 26 27 28 29 . d . e d y e a y l p a l s p i d s i dt o t n o ne r e a r a) . ) 4 .. . 4, 3 , 3, 2 , 2= =n ( n (0 2 2 + 1 +n 4 n 1 4 12 1 6 ++ n n 4 4 11 s s e e n n ii l l n n a a c c SS :: d d l l e e i i ff n d e d ov e * * 25 (28H~299H) 1st display period 312 313 314 315 316 (339H~611H) 2nd display period PA035XUJ The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:12 Invalidity data Fig. 8-2 Horizontal Start Pixel Validity data Invalidity data R,G,B CPH1 STH1,2 197 198 199 Tshw 1 2 3 t1H=199 CPHclk=63.5u sec 160 161 1 2 PA035XUJ The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:13 tDRGB VR,G,B VCOM Q2H XOE CPV INH STH1,2 HD tohs toev toc tohw tDCOM tvs tosp tss tcvwh tshw tcvw tcvwl Fig. 8-3 Detail Horizontal Timing PA035XUJ The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:14 Fig. 8-4 Sampling Clock Timing STH 1,2 CPH 3 CPH 2 CPH 1 tchd12 tchd23 tshset tshw tchwh tshhld G1 (R1) tchw tchwl B1 (G1) R1 (B1) G2 (R2) B2 (G2) R2 (B2) G3 (R3) PA035XUJ The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:15 Fig. 8-5 Vertical Shift Clock Timing DIO 1,2 CPV tcvwh tcvw tcvwl tsvset tsvw tsvhld PA035XUJ The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:16 PA035XUJ VCOM (Even field) VCOM (Odd field) Q2H DIO1 VD HD V(R,G,B) EVEN FIELD V(R,G,B) ODD FIELD Display on panel first line Fig. 8-6(b) Vertical Timing (From Up to Down) tsv GBR RGB Vertical timing (From up to down) The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:17 PA035XUJ VCOM (Even field) VCOM (Odd field) Q2H DIO2 VD HD V(R,G,B) ODD FIELD V(R,G,B) EVEN FIELD Display on panel first line tsv Fig. 8-6(a) Vertical Timing (From Down to Up) RGB GBR Vertical timing (From down to up) The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:18 PA035XUJ 9. Power on Sequence(Voltage source) The Power on Sequence only effect by VCC,VSS,VDD,VEE and VGH, the others do not care. VGH VDD,VCC VSS(0V) VEE OFF OFF ON T1 T3 T2 Logic signal VCOM,VGL RGB-Video signal T4 1) 10ms≦T1<T2 2) 0ms<T3≦T4≦10ms 10. Optical Characteristics 10-1) Specification Parameter Viewing Angle Symbol Condition MIN. Horizontal θ ±45 Vertical 10 θ(to 12 CR≧10 o’clock) 30 θ(to 6 o’clock) Contrast Ratio CR At optimized 200 Viewing angle Response time Rise Tr --θ=0° Fall Tf --φ=0° Uniformity U 65 Brightness 200 White x 0.29 θ=0° Chromaticity y 0.30 Lamp Life Time --+25℃ TYP. ±50 15 MAX. ----- 35 --- 350 --- 15 25 70 250 0.32 0.33 20,000 Ta = 25℃ Unit Remarks deg deg Note 10-3 deg Note 10-1 30 ms Note 10-4 50 ms ----- cd/㎡ Note 10-2 Note 10-2 0.35 0.36 --Hr The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:19 PA035XUJ Note 10-1：CR ＝ Luminance when LCD is White Luminance when LCD is Black Contrast Ratio is measured in optimum common electrode voltage. The test configurations of contrast ratio see section 10-2. Note 10-2：1.Topcon BM-7(fast) luminance meter 1.0°field of view is used in the testing (after 20~30 minutes operation). 2. Lamp current : 3 mA 3. Inverter model : TDK-347. Note 10-3：The definition of viewing angle diagrams : normal (θ = 0) observer θ 3 AB C 12 6 φ LCD panel 9 φ : Viewing direction θ : Viewing angle Note 10-4 : The definitions of response time: White Black White 100% 90% Brightness 10% 0% Tr Tf The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:20 PA035XUJ 10-2) Test Configuration BM-7(fast) Caution: 1. Environmental illumination≦1 lux 2. Before test CR, Vcom voltage must be adjusted carefully to get the best 500mm CR. R,G,B signal input Pattern generator y LCD Backlight LCD Display Testing Point Pattern A y R, G, B Waveform of Pattern A at Testing Point 63.6μs Testing Point Pattern B RGB waveform Vcom 63.6μs Vw=1.1V +/- 0.2V y R, G, B Waveform of Pattern B at Testing Point 63.6μs 63.6μs RGB waveform Vcom Vb=5.2V +/- 0.2V The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:21 PA035XUJ 11. Handling Cautions 11-1) Mounting of module a)Please power off the module when you connect the input/output connector. b) Please connect the ground pattern of the inverter circuit and case surely. If the connection is not perfect, some following problems may happen possibly. c) The noise from the backlight unit will increase. 1. The output from inverter circuit will be unstable. 2. In some cases a part of module will heat. 3. Polarizer which is made of soft material and susceptible to flaw must be handled carefully. d) Protective film (Laminator) is applied on surface to protect it against scratches and dirt. It is recommended to peel off the laminator before use and taking care of static electricity. 11-2) Precautions in mounting a) When metal part of the TFT-LCD module (shielding lid and rear case) is soiled, wipe it with soft dry cloth. b) Wipe off water drops or finger grease immediately. Long contact with water may cause discoloration or spots. c) TFT-LCD module uses glass which breaks or cracks easily if dropped or bumped on hard surface. Please handle with care. d) Since CMOS LSI is used in the module. So take care of static electricity and earth yourself when handling. 11-3) Adjusting module a) Adjusting volumes on the rear face of the module have been set optimally before shipment. b) Therefore, do not change any adjusted values. If adjusted values are changed, the specifications described may not be satisfied. 11-4) Others a) Do not expose the module to direct sunlight or intensive ultraviolet rays for many hours. b) Store the module at a room temperature place. c) The voltage of beginning electric discharge may over the normal voltage because of leakage current from approach conductor by to draw lump read lead line around. d) If LCD panel breaks, it is possibly that the liquid crystal escapes from the panel. Avoid putting it into eyes or mouth. When liquid crystal sticks on hands, clothes or feet. Wash it out immediately with soap. e) Observe all other precautionary requirements in handling general electronic components. f) Please adjust the voltage of common electrode as material of attachment by 1 module. The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:22 PA035XUJ 12. Reliability No. 1 2 3 4 5 Test Item High Temperature Storage Test Low Temperature Storage Test Low Temperature Operation Test High Temperature & High Humidity Operation Test Thermal Cycling Test (non-operating) 6 Vibration Test (non-operating) 7 Shock Test (non-operating) 8 Electrostatic Discharge Test (non-operating) Test Condition Ta = +70 ℃, 240 hrs Ta = -20℃, 240 hrs Ta = 0 ℃, 240 hrs Ta = +60℃, 90%RH, 240 hrs -20℃ →+70℃, 200 Cycles 30 min 30 min Frequency：10 ~ 55 HZ Amplitude：1.0 mm Sweep time: 11 mins Test Period: 6 Cycles for each direction of X, Y, Z 100G, 6ms Direction: ±X, ±Y, ±Z Cycle: 3 times Machine Mode=±200V C=200pF,R=0Ω 1 times discharge for each pad Ta: ambient temperature Note: The protective film must be removed before temperature test. [Criteria] Under the display quality test conditions with normal operation state, there should be no change which may affect practical display function. The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:23 PA035XUJ 13. Block Diagram LCD Panel V Driver (Gate) H Driver (Source) 28 PIN Input Inverter Back-light The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:24 PA035XUJ 14. Packing The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:25 PA035XUJ The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:26 PA035XUJ Revision History Rev. 1.0 Issued Date JAN 10, 2005 Revised NEW Contents The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:27