PM070WX1 Version : 1.3 TECHNICAL MODEL SPECIFICATION NO. : PM070WX1 Customer’s Confirmation Customer By PVI’s Confirmation Confirmed By Prepared By FOR MORE INFORMATION: AZ DISPLAYS, INC. 75 COLUMBIA, ALISO VIEJO, CA, 92656 Http://www.AZDISPLAYS.com Date: Jan.12,2005 This technical specification is subject to change without notice. Please return 1 copy with your signature on this page for approval. The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:1 PM070WX1 TECHNICAL SPECIFICATION CONTENTS NO. ITEM PAGE 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Cover Contents Application Features Mechanical Specifications Mechanical Drawing of TFT-LCD module Input / Output Terminals Absolute Maximum Ratings Electrical Characteristics Pixel Arrangement Display Color and Gray Scale Reference Block Diagram Interface Timing Power On Sequence Optical Characteristics 1 2 3 3 3 4 6 12 12 13 14 15 16 21 21 25 26 27 28 - Handling Cautions Reliability Test Packing Diagram Revision History The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:2 PM070WX1 1.Application This data sheet applies to a color TFT LCD module, PM070WX1. PM070WX1 module applies to OA product, portable DVD, car TV(must use Analog to Digital driving board), which requires high quality flat panel display. If you must use in severe reliability environment, please don’t extend over PVI’s reliability test conditions. If you use PM070WX1, Prime View advises your systems use PVI’s timing controller IC (PVI-2002A) which will generate proper timing signals to control PM070WX1. 2. Features . Wide VGA (800*480 pixels) resolution . Amorphous silicon TFT LCD panel with back-light unit . Pixel in stripe configuration . Thin and light weight . Display Colors：262,144 colors . Optimum Viewing Direction：6 o’clock . TTL transmission interface . Wide viewing angle 3.Mechanical Specifications Parameter Screen Size Display Format Display Colors Active Area Pixel Pitch Pixel Configuration Outline Dimension Weight Back-light Surface treatment Display mode Specifications 7.0(diagonal) 800×(R, G, B)×480 262,144 152.4(H)×91.44(V) 0.190(H)×0.190(V) Stripe 165.0(w)×104.0 (H)×6.2 (typ.) (D) 175 CCFL, 1 tube Anti-glare and Wide View Film Normally white Unit inch dot mm mm mm g The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:3 PM070WX1 4.Mechanical Drawing of TFT-LCD Module Outline Drawing : Front View (unit mm) The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:4 PM070WX1 Outline Drawing : Rear View (unit mm) The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:5 PM070WX1 5.Input / Output Terminals 5-1) TFT-LCD Panel Driving CN 1 Pin No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 Symbol DIO1 VSS1 VDD1 CLK VSS1 R/L R0 R1 R2 R3 R4 R5 VSS1 G0 G1 G2 G3 G4 G5 VSS1 B0 B1 B2 B3 B4 B5 LD REV POL DIO2 I/O I/O I I I I I I I I I I I I I I I I I I I I I I I I I I I I I/O Function Horizontal Start Pulse Signal Input or Output Ground Power Supply Horizontal Shift Clock Ground Right / Left selection Red Data (LSB) Red Data Red Data Red Data Red Data Red Data (MSB) Ground Green Data (LSB) Green Data Green Data Green Data Green Data Green Data (MSB) Ground Blue Data (LSB) Blue Data Blue Data Blue Data Blue Data Blue Data (MSB) Load output signal Data invert control Polarity selection Horizontal Start Pulse Signal Input or Output Remark Note 5-1 Note 5-1 Note 5-2 Note 5-3 Note 5-4 Note 5-1 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:6 PM070WX1 CN 2 Pin No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 Symbol VSS2 V1 V2 V3 V4 V5 V6 V7 VSS2 V8 V9 V10 V11 V12 V13 V14 VSS2 VDD2 VCOM XON OE U/D CKV STVU STVD VGG GND VCC GND VEE I/O I I I I I I I I I I I I I I I I I I I I I I I I/O I/O I I I I I Function Ground Gamma Voltage 1 Gamma Voltage 2 Gamma Voltage 3 Gamma Voltage 4 Gamma Voltage 5 Gamma Voltage 6 Gamma Voltage 7 Ground Gamma Voltage 8 Gamma Voltage 9 Gamma Voltage 10 Gamma Voltage 11 Gamma Voltage 12 Gamma Voltage 13 Gamma Voltage 14 Ground Voltage for analog circuit Common Voltage NC Output Enable Up / Down Selection Vertical Shift Clock Vertical Shift Pulse Signal Input or Output Vertical Shift Pulse Signal Input or Output Gate On Voltage Ground Voltage for logic circuit Ground Gate Off Voltage Note 5-1: Select left or right shift R/L DIO1 DIO2 1 Input Hi-Z 0 Hi-Z Input Remark Note 5-10 Note 5-10 Note 5-10 Note 5-10 Note 5-10 Note 5-10 Note 5-10 Note 5-10 Note 5-10 Note 5-10 Note 5-10 Note 5-10 Note 5-10 Note 5-10 Note 5-10 Note 5-5 Note 5-6 Note 5-7 Note 5-6 Note 5-6 Note 5-8 Note 5-9 Shift Left to right Right to left Note 5-2: Latch the polarity of outputs and switch the new data to outputs At the rising edge (LD), latch the “POL” signal to control the polarity of the outputs. Note 5-3: Control whether the Data R0~G5 are inverted or not. (PVI suggests connecting to GND) When “REV=1”, these data will be inverted. EX: “00”→”3F”, “07”→”38”, “15”→”2A” Note 5-4: Polarity selector for dot-inversion control. Available at the rising edge of LD. When POL=1: Even outputs range from V1~V7, and Odd outputs range from V8~V14; When POL=0: Even outputs range from V8~V14, and Odd outputs range from V1~V7. Note 5-5: When OE is connected to high “1”, the driver outputs are disabled (Gate output = VEE). Under this condition, the operation of registers will not be affected. The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:7 PM070WX1 Note 5-6: Select up or down shift U/D 1 0 STVU Hi-Z Input STVD Input Hi-Z Shift Down to Up Up to Down Note 5-7: Gate driver shift clock Note 5-8: Gate on voltage, VGG=27V. Note 5-9: Gate off voltage, VEE=-10V. Note 5-10: 1) Relationship between input data and output voltage The figure below shows the relationship between the input data and the output voltage to panel with the polarity. The range of V1~V7 is for positive polarity, and V8~V14 for negative polarity. Please refer to the following pages to get the related resister values and voltage calculation method. Vout VDD2 Gamma correction diagram V1 V2 V3 V4 V5 Positive polarity V6 V7 Vcom V8 V9 V10 V11 V12 Negative polarity V13 V14 Vss2 00H 08H 10H 18H 20H 28H 30H 38H 3FH Input Data Remark: VDD2-0.1≧V1≧V2≧V3≧V4≧V5≧V6≧V7; V8≧V9≧V10≧V11≧V12≧V13≧V14≧ VSS2+0.1V. The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:8 PM070WX1 2) Output voltage and input data Output Voltage to Panel VS Input Data Data Positive polarity Output Voltage Negative polarity Output Voltage 00H V1 V14 01H V2=V3+(V1-V3) × 58 / 64.4 V13=V14+(V12-V14) × 6.4 / 64.4 02H V3+(V1-V3) × 52 / 64.4 V14+(V12-V14) × 12.4 / 64.4 03H V3+(V1-V3) × 46.4 / 64.4 V14+(V12-V14) × 18 / 64.4 04H V3+(V1-V3) × 41.2 / 64.4 V14+(V12-V14) × 23.2 / 64.4 05H V3+(V1-V3) × 36.4 / 64.4 V14+(V12-V14) × 28 / 64.4 06H V3+(V1-V3) × 32 / 64.4 V14+(V12-V14) × 32.4 / 64.4 07H V3+(V1-V3) × 27.6 / 64.4 V14+(V12-V14) × 36.8 / 64.4 08H V3+(V1-V3) × 23.6 / 64.4 V14+(V12-V14) × 40.8 / 64.4 09H V3+(V1-V3) × 19.6 / 64.4 V14+(V12-V14) × 44.8 / 64.4 0AH V3+(V1-V3) × 16.4 / 64.4 V14+(V12-V14) × 48 / 64.4 0BH V3+(V1-V3) × 13.2 / 64.4 V14+(V12-V14) × 51.2 / 64.4 0CH V3+(V1-V3) × 10.4 / 64.4 V14+(V12-V14) × 54 / 64.4 0DH V3+(V1-V3) × 7.6 / 64.4 V14+(V12-V14) × 56.8 / 64.4 0EH V3+(V1-V3) × 4.8 / 64.4 V14+(V12-V14) × 59.6 / 64.4 0FH V3+(V1-V3) × 2.4 / 64.4 V14+(V12-V14) × 62 / 64.4 10H V3 V12 11H V4+(V3-V4) × 19.6 / 22 V12+(V11-V12) × 2.4 / 22 12H V4+(V3-V4) × 17.6 / 22 V12+(V11-V12) × 4.4 / 22 13H V4+(V3-V4) × 15.6 / 22 V12+(V11-V12) × 6.4 / 22 14H V4+(V3-V4) × 13.6 / 22 V12+(V11-V12) × 8.4 / 22 15H V4+(V3-V4) × 12 / 22 V12+(V11-V12) × 10 / 22 16H V4+(V3-V4) × 10.4 / 22 V12+(V11-V12) × 11.6 / 22 17H V4+(V3-V4) × 8.8 / 22 V12+(V11-V12) × 13.2 / 22 18H V4+(V3-V4) × 7.6 / 22 V12+(V11-V12) × 14.4 / 22 19H V4+(V3-V4) × 6.4 / 22 V12+(V11-V12) × 15.6 / 22 1AH V4+(V3-V4) × 5.2 / 22 V12+(V11-V12) × 16.8 / 22 1BH V4+(V3-V4) × 4 / 22 V12+(V11-V12) × 18 / 22 1CH V4+(V3-V4) × 3.2 / 22 V12+(V11-V12) × 18.8 / 22 1DH V4+(V3-V4) × 2.4 / 22 V12+(V11-V12) × 19.6 / 22 1EH V4+(V3-V4) × 1.6 / 22 V12+(V11-V12) × 20.4 / 22 1FH V4+(V3-V4) × 0.8 / 22 V12+(V11-V12) × 21.2 / 22 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:9 PM070WX1 Output Voltage to Panel VS Input Data(continued) Data Positive polarity Output Voltage Negative polarity Output Voltage 20H V4 V11 21H V5+(V4-V5) × 12 / 12.8 V11+(V10-V11) × 0.8 / 12.8 22H V5+(V4-V5) × 11.2 / 12.8 V11+(V10-V11) × 1.6 / 12.8 23H V5+(V4-V5) × 10.4 / 12.8 V11+(V10-V11) × 2.4 / 12.8 24H V5+(V4-V5) × 9.6 / 12.8 V11+(V10-V11) × 3.2 / 12.8 25H V5+(V4-V5) × 8.8 / 12.8 V11+(V10-V11) × 4 / 12.8 26H V5+(V4-V5) × 8 / 12.8 V11+(V10-V11) × 4.8 / 12.8 27H V5+(V4-V5) × 7.2 / 12.8 V11+(V10-V11) × 5.6 / 12.8 28H V5+(V4-V5) × 6.4 / 12.8 V11+(V10-V11) × 6.4 / 12.8 29H V5+(V4-V5) × 5.6 / 12.8 V11+(V10-V11) × 7.2 / 12.8 2AH V5+(V4-V5) × 4.8 / 12.8 V11+(V10-V11) × 8 / 12.8 2BH V5+(V4-V5) × 4 / 12.8 V11+(V10-V11) × 8.8 / 12.8 2CH V5+(V4-V5) × 3.2 / 12.8 V11+(V10-V11) × 9.6 / 12.8 2DH V5+(V4-V5) × 2.4 / 12.8 V11+(V10-V11) × 10.4 / 12.8 2EH V5+(V4-V5) × 1.6 / 12.8 V11+(V10-V11) × 11.2 / 12.8 2FH V5+(V4-V5) × 0.8 / 12.8 V11+(V10-V11) × 12 / 12.8 30H V5 V10 31H V7+(V5-V7) × 26.8 / 27.6 V10+(V8-V10) × 0.8 / 27.6 32H V7+(V5-V7) × 26 / 27.6 V10+(V8-V10) × 1.6 / 27.6 33H V7+(V5-V7) × 25.2 / 27.6 V10+(V8-V10) × 2.4 / 27.6 34H V7+(V5-V7) × 24.4 / 27.6 V10+(V8-V10) × 3.2 / 27.6 35H V7+(V5-V7) × 23.6 / 27.6 V10+(V8-V10) × 4 / 27.6 36H V7+(V5-V7) × 22.4 / 27.6 V10+(V8-V10) × 5.2 / 27.6 37H V7+(V5-V7) × 21.2 / 27.6 V10+(V8-V10) × 6.4 / 27.6 38H V7+(V5-V7) × 20 / 27.6 V10+(V8-V10) × 7.6 / 27.6 39H V7+(V5-V7) × 18.4 / 27.6 V10+(V8-V10) × 9.2 / 27.6 3AH V7+(V5-V7) × 16.8 / 27.6 V10+(V8-V10) × 10.8 / 27.6 3BH V7+(V5-V7) × 14.8 / 27.6 V10+(V8-V10) × 12.8 / 27.6 3CH V7+(V5-V7) × 12.8 / 27.6 V10+(V8-V10) × 14.8 / 27.6 3DH V7+(V5-V7) × 10.4 / 27.6 V10+(V8-V10) × 17.2 / 27.6 3EH V7+(V5-V7) × 6.4 / 27.6 V10+(V8-V10) × 21.2 / 27.6 3FH V7 V8 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:10 PM070WX1 3) Typical Application Circuit (When VDD2 = +9.5V) 2 V1 R15 1 VDD2 2 V2 0 OHM 1 R1 OPEN 1 V3 R2 2 0 OHM 1 R3 2 V4 1.2K OHM 1 V5 R4 2 OPEN 1 R5 2 V6 OPEN 1 V7 R6 2 10K OHM 1 R7 2 V8 787 1% OHM 1 V9 R8 2 10K OHM 1 R9 2 V10 OPEN 1 V11 R10 2 OPEN 1 R11 2 V12 4.7K OHM 1 V13 R12 2 51K OHM 1 R13 2 V14 OPEN 1 R14 2 0 OHM 5-2) Backlight driving Connector type: JST BHR-02VS-1, PIN No 2 pin, pitch=3.5mm Pin No Symbol Description 1 VL1 Input terminal (Hi voltage side) 2 VL2 Input terminal (Low voltage side) Remark Wire color : Pink Wire Color : White Note 5-2 Note 5-2 : Low voltage side of backlight inverter connects with ground of inverter circuits. The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:11 PM070WX1 VSS1=VSS2=GND=0V, Ta=25℃ 6.Absolute Maximum Ratings: Parameters Symbol VDD1 VCC VDD2 VGG VGG-VEE VEE VIN VL FL TST TOP Supply Voltage Digital Input Backlight Driving Voltage Backlight Driving Frequency Storage Temperature Operating Temperature MIN. MAX. -0.3 5.0 -0.5 -0.3 -20 -0.5 0 -30 -20 12.0 40.0 40 0.3 VCC+0.5 2000 100 90 80 Unit V V V V V V V V KHz ℃ ℃ Remark 7.Electrical Characteristics VSS1=VSS2=GND=0V, Ta=25℃ 7-1) Recommended Operating Conditions: Item Supply Voltage for Source Driver Supply Voltage for Gate Driver Digital Input Voltage Symbol Min. VDD1 3.0 VDD2 9 VGG VEE VCC 3.0 VIH 0.8VDD1 VIL 0 Typ. 3.3 9.5 27 -10 3.3 - 7-2) Recommended Driving Condition for Back Light Parameter Symbol Min. Typ. Max. Lamp Voltage VL 580 638 Lamp Current IL 7 4 6 Lamp Frequency PL 45 60 80 Max. Unit 3.6 V 10 V V V 3.6 V VDD1 V 0.2VDD1 V Remark Unit V mA Ta=25℃ Remark IL=6mA Note 7-1 KHz Note 7-2 Vrms Note 7-3 Vs Starting Voltage (25℃) 820 (Reference Value) Vrms Note 7-3 Vs Starting Voltage (0℃) 970 (Reference Value) Note 7-1: In order to satisfy the quality of B/L, no matter use what kind of inverter, the output lamp current must between Min. and Max. to avoid the abnormal display image caused by B/L. Note 7-2: The waveform of lamp driving voltage should be as closed to a perfect sine wave as possible. Note 7-3: 1. This value is not output voltage of inverter. 2. The voltage of inverter must larger than the starting voltage. 3. The Kick-off times≧1sec The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:12 PM070WX1 7-3) Power Consumption Parameter Supply Current for Gate Driver (Hi level) Supply Current for Gate Driver (Low level) Supply Current for Source Driver (Digital) Supply Current for Source Driver (Analog) Supply Current for Gate Driver (Digital) LCD Panel Power Consumption Back Light Lamp Power Consumption Symbol IGG IEE IDD1 IDD2 ICC Condition VGG=+27V VEE=-10V VDD1=+3.3V VDD2=+9.5V VCC=+3.3V Typ. 0.32 3.35 6 20 0.01 251.97 3.48 Max. 0.41 4.19 10 27.5 0.013 347.26 Unit Remark mA mA mA mA mA mW Note 7-4 W Note 7-5 Note 7-4: The power consumption for back light is not included. Note 7-5: Back light lamp power consumption is calculated by IL×VL. 8. Pixel Arrangement The LCD module pixel arrangement is the stripe. R G B R G B R G B 1 st Line RGB R G B R G B 2 nd Line RGB R G B 3 rd Line RGB 1 st Pixel 800 th Pixel 1 Pixel = R G B RGB 478 th Line RGBRGB RGB 479 th Line RGBRGBRGB 480 th Line RGB RGB The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:13 PM070WX1 9. Display Color and Gray Scale Reference Color Input Color Data Green Red Blue R5 R4 R3 R2 R1 R0 G5 G4 G3 G2 G1 G0 B5 B4 B3 B2 B1 B0 Basic Colors Red Green Blue Black Red (63) Green (63) Blue (63) Cyan Magenta Yellow White Red (00) Red (01) Red (02) Darker ↓ Brighter Red (61) Red (62) Red (63) Green (00) Green (01) Green (02) Darker ↓ Brighter Green (61) Green (62) Green (63) Blue (00) Blue (01) Blue (02) Darker ↓ Brighter Blue (61) Blue (62) Blue (63) 0 1 0 0 0 1 1 1 0 0 0 0 1 0 0 0 1 1 1 0 0 0 0 1 0 0 0 1 1 1 0 0 0 0 1 0 0 0 1 1 1 0 0 0 0 1 0 0 0 1 1 1 0 0 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 0 1 0 1 1 0 0 0 0 0 1 0 1 0 1 1 0 0 0 0 0 1 0 1 0 1 1 0 0 0 0 0 1 0 1 0 1 1 0 0 0 0 0 1 0 1 0 1 1 0 0 0 0 0 1 0 1 0 1 1 0 0 0 0 0 0 1 1 1 0 1 0 0 0 0 0 0 1 1 1 0 1 0 0 0 0 0 0 1 1 1 0 1 0 0 0 0 0 0 1 1 1 0 1 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 0 0 1 1 0 0 0 0 0 0 ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ 1 1 1 0 0 0 1 1 1 0 0 0 1 1 1 0 0 0 1 1 1 0 0 0 0 1 1 0 0 0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 0 0 0 1 1 1 0 0 0 1 1 1 0 0 0 1 1 1 0 0 0 0 1 1 0 0 0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 1 0 ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 0 1 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:14 PM070WX1 10. Block Diagram 10-1) TFT-module Block Diagram SYSTEM User signal input Timing Controller (PVI-2002A) Video Control VDD1 VDD2 DC-DC Converter Gamma Generator Gamma Vcom Generator Vcom VGG / VEE FPC Source Driver IC 7" WVGA TFT-LCD Panel Gate Driver IC If you use PD070WX1, you can apply PVI-2002A(Timing controller) which will gernerate timing signals to support PD070WX1. The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:15 PM070WX1 11. Interface Timing 11.1) Timing Parameters AC Electrical Characteristics (VCC=VDD1=3.3V, VDD2=9.5V, GND=VSS1=VSS2=0V, Ta=25℃) Parameter Symbol Min. Typ. Max. Unit CLK Frequency Fclk - 32 40 MHz CLK Pulse Width Tcw 25 - - ns Data Set-up Time Tsu 4 - - ns Data Hold Time Thd 2 - - ns Propagation Delay of DIO2/1 Tphl 6 10 15 ns Time That The Last Data to LD Tld 1 - - Tcw Pulse width of LD Twld 2 - - Tcw Time That LD to DIO1/2 Tlds 5 - - Tcw POL Set-up Time Tpsu 6 - - ns POL Hold Time Tphd 6 - - ns OE Pulse Width TOEV 1 - - µs CKV Pulse Width TCKV 500 - - ns STV Set-up Time TSUV 400 - - ns STV Hold Time THDV 400 - - ns Horizontal Display Period THDP - 800 - Tcw Horizontal Period Timing Range THP - 1056 - Tcw Horizontal Lines Per Field TV 484 508 620 THP Vertical Display Timing Range TDV - 480 - THP The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:16 PM070WX1 30% Tphl First data (Output) DIO1/2 REV Data (Input) DIO1/2 CLK 70% Tsu 70% Thd 70% 70% Tsu 70% 1 Thd Tcw 2 Second data Fig. 11-1 Horizontal timing (1) 70% Tphl 799 70% Last 70% data 800 11.2) Timing Diagram The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:17 Negative High-z High-z 70% Tphd 70% Tpsu 70% 70% High-z Even outputs Odd outputs Tpsu Tphd 70% POL LD DIO 1/2 (Input) LD CLK 70% 70% Last Thd 30% 70% Tlds Twld Fig. 11-2 Horizontal timing(2) 70% 30% 70% Tpsu Tphd 30% Positive PM070WX1 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:18 Fig. 11-3 Vertical shift clock timing OE TSUV CKV STVU/STVD 50% TOEV THDV TCKV 50% PM070WX1 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:19 Fig. 11-4 Vertical timing POL(Even Field) POL(Odd Field) STVU/STVD (VSY) (HSY) THP THDP PM070WX1 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:20 PM070WX1 12. Power On Sequence VGG VDD2 VDD1,VCC VSS(0V) VEE OFF OFF ON T1 T3 Logic signal RGB-Video signal T2 T4 1.10ms≦T1＜T2 2. 0ms＜T3≦T4≦10ms 13. Optical Characteristics 13-1) Specification: Parameter Horizontal Viewing Angle Vertical Contrast Ratio Rise Response time Fall Brightness Luminance Uniformity Lamp Life Time White Chromaticity Cross Talk Symbol Condition θ θ(to 12 o’clock) CR＞10 θ(to 6 o’clock) CR Tr θ=0° Tf θ=0°/φ=0 U x y θ=0° MIN. ±55 TYP. ±60 MAX. Unit deg 35 40 - deg 50 55 - deg 250 350 70 25000 0.27 0.297 - Ta=25℃ Remarks Note 13-1 400 Note 13-2 15 30 ms Note 13-3 25 50 ms 400 cd/㎡ Note 13-4 75 % Note 13-5 hr At 6mA 0.3 0.33 0.327 0.357 3.5 % Note 13-6 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:21 PM070WX1 Note 13-1: The definitions of viewing angles are as follow Note 13-2: The definition of contrast ratio CR = Luminance at gray level 63 Luminance at gray level 0 Note 13-3: Definition of Response Time Tr and Tf: White Black White 100% 90% Brightness 10% 0% Tr Tf The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:22 PM070WX1 Note 13-4: All the optical measurement shall be executed 30 minutes after backlight being turn-on. The optical characteristics shall be measured in dark room (ambient illumination on panel surface less than 1 Lux). The measuring configuration shows as following figure. Photometer (TOPCON BM-5A or BM-7 fast) 500 mm +/- 50 mm Field = 1° TFT-LCD module DC/AC Inverter Optical characteristics measuring configuration Note 13-5: The uniformity of LCD is defined as U= The Minimum Brightness of the 9 testing Points The Maximum Brightness of the 9 testing Points Luminance meter : BM-5A or BM-7 fast(TOPCON) Measurement distance : 500 mm +/- 50 mm Ambient illumination : < 1 Lux Measuring direction : Perpendicular to the surface of module The test pattern is white (Gray Level 63). 1/6 2/6 2/6 1/6 1/6 2/6 2/6 1/6 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:23 PM070WX1 Note 13-6: Cross Talk (CTK) = YA-YB ×100% YA YA: Brightness of Pattern A YB: Brightness of Pattern B Luminance meter : BM 5A or BM-7 fast (TOPCON) Measurement distance : 500 mm +/- 50 mm Ambient illumination : < 1 Lux Measuring direction : Perpendicular to the surface of module Pattern A Pattern B (Gray Level 31) (Gray Level 31, central black box exclusive) YA YB 1/3 1/3 1/3 1/3 1/3 1/3 Black : Measuring Point (A and B are at the same point.) (Gray Level 0) Note 13-7: Topcon BM-5A or BM-7 fast luminance meter 1°field of view is used in the testing (after 30 minutes’ operation). The typical luminance value is measured at lamp current 6.0 mA. The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:24 PM070WX1 14. Handling Cautions 14-1) Mounting of module a) Please power off the module when you connect the input/output connector. b) Please connect the ground pattern of the inverter circuit surely. If the connection is not perfect, some following problems may happen possibly. 1.The noise from the backlight unit will increase. 2.The output from inverter circuit will be unstable. 3.In some cases a part of module will heat. c) Polarizer which is made of soft material and susceptible to flaw must be handled carefully. d) Protective film (Laminator) is applied on surface to protect it against scratches and dirts. It is recommended to peel off the laminator before use and taking care of static electricity. 14-2) Precautions in mounting a) When metal part of the TFT-LCD module (shielding lid and rear case) is soiled, wipe it with soft dry cloth. b) Wipe off water drops or finger grease immediately. Long contact with water may cause discoloration or spots. c) TFT-LCD module uses glass which breaks or cracks easily if dropped or bumped on hard surface. Please handle with care. d) Since CMOS LSI is used in the module. So take care of static electricity and earth yourself when handling. 14-3) Adjusting module a) Adjusting volumes on the rear face of the module have been set optimally before shipment. b) Therefore, do not change any adjusted values. If adjusted values are changed, the specifications described may not be satisfied. 14-4) Others a) Do not expose the module to direct sunlight or intensive ultraviolet rays for many hours. b) Store the module at a room temperature place. c) The voltage of beginning electric discharge may over the normal voltage because of leakage current from approach conductor by to draw lump read lead line around. d) If LCD panel breaks, it is possibly that the liquid crystal escapes from the panel. Avoid putting it into eyes or mouth. When liquid crystal sticks on hands, clothes or feet. Wash it out immediately with soap. e) Observe all other precautionary requirements in handling general electronic components. f) Please adjust the voltage of common electrode as material of attachment by 1 module. 14-5) Polarizer mark The polarizer mark is to describe the direction of wide view angle film how to mach up with the rubbing direction. The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:25 PM070WX1 15. Reliability Test No Test Item Test Condition 1 High Temperature Storage Test Ta = +80℃, 240 hrs 2 Low Temperature Storage Test Ta = -30℃, 240 hrs 3 High Temperature Operation Test Ta = +80℃, 240 hrs 4 Low Temperature Operation Test Ta = -20℃, 240 hrs 5 6 7 8 9 High Temperature & High Humidity Operation Test Ta = +60℃, 90%RH, 240 hrs (No Condensation) Thermal Cycling Test -30℃Æ+80℃, 200 Cycles (non-operating) 30min 30min Frequency：10 ~ 55 HZ , Amplitude：1 mm Sweep time: 11 min Vibration Test (non-operating) Shock Test (non-operating) Electrostatic Discharge Test (non-operating) Remark Test Period: 6 Cycles for each direction of X, Y, Z 100G, 6ms Direction: ±X, ±Y, ±Z Cycle: 3 times 200pF, 0Ω ±200V 1 time / each terminal Ta: ambient temperature Note : The protective film must be removed before temperature test. [Judgement Criteria] Under the display quality test conditions with normal operation state , there should be no change which may affect practical display function. The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:26 PM070WX1 16. Packing Diagram The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:27 PM070WX1 Revision History Rev. 0.0 0.1 Issued Date 10 Nov. 2003 17 Mar. 2004 Revised Contents 1.0 12 May.2004 Modify Page 3 : 3.Mechanical Specifications Page 11 : 6.Absolute Maximum Ratings: New Modify Page 4 : 4.Mechanical Drawing of TFT-LCD Module Outline Drawing : Front View (unit mm) Page 16 : 13.Optical Characteristics, 13-1) Specification: Luminance Uniformity (U) from “Min : 55, Typ : 80” to “Min : 70,Typ :75” 7-2) Recommended Driving Condition for Back Light Page 12 : 7-3) Power Consumption Page 16 : 13. Optical Characteristics, 13-1) Specification: 1.1 03 Aug .2004 1.2 06 Oct.2004 1.3 12 Jan.2005 Page 22 : 17. Packing Diagram Modify Page 6 : 5.Input / Output Terminals Page 8 : Note 5-5 Page 12 : 6.Absolute Maximum Ratings 7-1) Recommended Operating Conditions Page 13 : 7-3) Power Consumption Page 16 : 11.1) Timing Parameters Page 17 : 11.2) Timing Diagram Page 21 : 12. Power On Sequence Page 21 : 13. Optical Characteristics Add Page11 : Note5-10 3)Typical Application Circuit (When VDD2 = +9.5V) Add Page 12 : Note 7-3 ,3. The Kick-off times≧1sec Modify Page 13 : 7-3) Power Consumption Add Page 26 : 15. Reliability Test, Note Del Page 26 : 16. Indication of Lot Number Label The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:28