TS5Y Vishay Sfernice Surface Mount Miniature Trimmers Single Turn Cermet Fully Sealed FEATURES • • • • • • • • • • • The TS5 trimming potentiometer has been designed for surface mount applications and offers volumetric efficiency (5 x 5 x 2.7 mm) with high performance and stability. The TS5 design is suitable for both manual or automatic operation, and can withstand wave, vapor phase and reflow soldering techniques. 0.20 Watt at 85°C CECC 41100 GAM T1 Professional grade Excellent stability Wide ohmic range Full sealing Low temperature coefficient Low contact resistance variation Small size for optimum packing density Suitable for both manual or automatic operation DIMENSIONS in millimeters RECOMMENDED SOLDERING AREAS TS5YL TS5YJ TS5YL 5 0.20 2.7 2 5 2.7 2 0.20 b 1.3 b 2 6.4 TS5YJ Ø 2.5 MAX 5.5 1.3 5.5 Ø 2.5 MAX 4 1.3 2 1.3 c a c a 2.3 2.3 ADHESIVE PAD (detail) 3.2 0.9 X 0.20 1 X 0.20 a a b A6 b 0.9 X 0.20 1 X 0.20 0.10 5 103 2.30 c L VERSION J VERSION 1.1 0.10 2.30 5 c 0.65 cruciform screwdriver slot ø2.5, width 0.5 deep: 0.55 max deep (center): 0.7 Ø 2.5 adhesive pad cruciform screwdriver slot ø2.5, width 0.5 deep: 0.55 max deep (center): 0.7 CIRCUIT DIAGRAM a c (1) (3) b CW (2) Document Number: 51007 Revision 04-Mar-02 For technical questions, contact [email protected] www.vishay.com 11 TS5Y Vishay Sfernice Surface Mount Miniature Trimmers Single Turn Cermet Fully Sealed ELECTRICAL SPECIFICATIONS Resistive Element Cermet Electrical Travel 220° ± 15° Resistance Range 10Ω to 1MΩ Standard Series 1-2-5 Tolerance Standard Power Rating ±10% Linear 0.25W at 70°C Logarithmic not applicable Temperature Coefficient See Standard Resistance Element Data Limiting Element Voltage (Linear Law) 200V Contact Resistance Variation 1 % or 3Ω End Resistance (Typical) 0.1% or 3Ω Dielectric Strength (RMS) 1000V Insulation Resistance 106MΩ Specification in accordance with CECC 41100 and VRCI MECHANICAL SPECIFICATIONS POWER RATING CHART 270° ± 10° 1.5 3.5 0.15 0.25 0.2 ENVIRONMENTAL SPECIFICATIONS Temperature Range Climatic Category Sealing – 55°C + 125°C 55 / 125 / 56 fully sealed container solder immersion IP67 RATED POWER IN WATT Mechanical Travel Operating Torque (max. Ncm) End Stop Torque (max. Ncm) Unit Weight (max. g) 0.15 0.1 0.05 0 0 20 40 60 70 85 100 120 140 155 AMBIENT TEMPERATURE IN DEGREES CELSIUS PERFORMANCE TYPICAL VALUES AND DRIFTS TESTS CONDITIONS 1000 hours at rated power 90'/30' - ambient temperature + 85°C Load Life MIL STD 202 Method 106 10 cycles of 24 hours constituted with damp heat - cold - vibrations Moisture Resistance Temperature 40°C - RH 93 % 56 days Long Term Damp Heat Thermal Shock Rotational Life (Electrical and Mechanical) Shock Vibration www.vishay.com 12 ∆RT ∆R1-2 (%) (%) RT R1-2 ± 2% ±3% Contact resistance variation : ∆R < 1% Rn ±2% ±3% Dielectric strength : 1000 V4RMS Insulation resistance : > 10 MΩ ±2% ±3% Dielectric strength : 1000 V4RMS Insulation resistance : > 10 MΩ ∆V1-2 ≤ ± 2% V1-3 55°C to + 125°C - 5 cycles ±1% 100 cycles - rated power ±3% MIL STD 202 Method 213/1 100 g - 6 ms 3 successive shocks in 3 directions ±1% ∆V1-2 ≤ ± 1% V1-3 MIL STD 202 Method 204/D 20 g - 12 hours ±1% ∆V1-2 ≤ ± 1% V1-3 For technical questions, contact [email protected] Document Number: 51007 Revision 04-Mar-02 TS5Y Surface Mount Miniature Trimmers Single Turn Cermet Fully Sealed STANDARD RESISTANCE ELEMENT DATA STANDARD RESISTANCE VALUES Ω 10 20 50 100 200 500 1k 2k 5k 10k 20k 50k 100k 200k 500k 1M MAX. POWER AT 85°C W 0.20 LINEAR LAW MAX. MAX. CUR. WORKING THROUGH VOLTAGE ELEMENT V mA 141 1.41 100 2 63 3.16 4.47 6.32 10 14.1 20 31.6 44.7 63.2 100 141 200 200 200 0.2 0.2 0.2 0.08 0.04 45 32 20 14 10 6.3 4.5 3.2 2 1.4 1 0.4 0.2 T.C. – 55°C + 125°C ppm/°C 0 + 200 Vishay Sfernice MARKING (RED MARK) VISHAY trademark, ohmic value, manufacturing date, red mark. The ohmic value is indicated by a 3 figure code, the first two are significant figures, the third one is the multiplier. Example: 100 = 10Ω 101 = 100Ω 102 = 1000Ω 503 = 50000Ω SOLDERING RECOMMENDATIONS ± 100 Vapour phase: 215°C/20 to 40 seconds. Reflow: 230°C/20 seconds. Do not exceed peak 260°C or with an IRON 40W: 3 seconds at 350°C. Soldering is possible by wave, reflow and vapor phase. PACKAGING On tape and reel of 500 pieces, code TR and 2000 pieces, code TR1 3 slots - width 2 to 120° - ø ext. 23 2 Ø 12.7 Ø 70 13 Ø 178 ± 2 8 5.2 0.3 7.6 12 2 5.5 3.2 1.75 4 Ø 1.5 Cover tape panel strength specifications EIA 481 A and CEI 60286-3. ORDERING INFORMATION TS5 YL 500KΩ ± 10% TR500 SERIES STYLE OHMIC VALUE TOLERANCE PACKAGING TR500: Tape and reel 500 pcs. TR2000: Tape and reel 2000 pcs. Document Number: 51007 Revision 04-Mar-02 For technical questions, contact [email protected] www.vishay.com 13