VDSL Magnetics Broadcom • TM01357 Designed to comply with the requirements of GR1089, UL1950, EN60950, BABT and CSA950 to provide a supplementary insulation barrier with a working voltage of 250V • UL File Number E150991 • Minimum interwinding breakdown voltage of 1500 Vrms • Operating and storage temperature range: -40° to +85° C • Meets IEC 695, 2-2 flammability requirements • PWB Process Capability: standard printed wiring board assembly techniques, total-immersion cleaning • Reliability testing: shock, vibration, temperature cycling, temperature - humidity - bias ELECTRICAL SPECIFICATIONS AT 25° C Turns Ratio ±2% Inductance1 µH min Leakage Inductance2 µH max Chip : Line Line Side Line Side (6 - 4) (1 - 3) 200 kHz 400 kHz 400 kHz 30 MHz 300 kHz 20 MHz 20 MHz 30 MHz 1:1 400 3 0.4 0.6 0.75 0.5 20 18 Part Number S560-6600-Y7 DCR Ω max Insertion Loss dB max Return Loss dB min 1. Inductance measured at 100 kHz, 0.1 Vac 2. Leakage inductance measured at 1 MHz, 20mV SCHEMATIC S560-6600-Y7 3 4 1 6 ©2001 Bel Fuse Inc. Specifications subject to change without notice. 08.01 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com page 1 VDSL Magnetics Broadcom TM01357 MECHANICAL 0.300 [7.62] max S560-6600-Y7 0.100 [2.54] 0.285 [7.24] max 0.375 [9.52] 0.350 [8.89] 0.425 [10.80] 0.100 [2.54] pitch 0.018 ±0.002 [0.46 ±0.05] 0.070 [1.78] 0.025 [0.62] Suggested PCB Pad Layout 0.012 [0.30] 0.008 [0.20] 0.200 [5.09] max 4˚ nom 0.004 [0.10] 0.200 [5.08] 0.003 [0.08] min 0.035 [0.88] Dimensions are in inches [millimeters]. Standard dimension tolerance is ±0.005 [0.13] unless otherwise noted. Tape and Reel Packaging 16 mm wide by 12 mm pitch; 13 inch OD, 4 inch ID 500 components per reel, maximum Meets ANSI/EIA 481-2 Carrier Tape Standards User Feed Direction Orientation of Component Inside Pocket ©2001 Bel Fuse Inc. Specifications subject to change without notice. 08.01 CORPORATE FAR EAST EUROPE Bel Fuse Inc. 206 Van Vorst Street Jersey City, NJ 07302 Tel 201-432-0463 Fax 201-432-9542 www.belfuse.com Bel Fuse Ltd. 8F / 8 Luk Hop Street San Po Kong Kowloon, Hong Kong Tel 852-2328-5515 Fax 852-2352-3706 www.belfuse.com Bel Fuse Europe Ltd. Preston Technology Management Centre Marsh Lane, Suite G7, Preston Lancashire, PR1 8UD, U.K. Tel 44-1772-556601 Fax 44-1772-888366 www.belfuse.com page 2