ADSL Magnetics TM02393 • Designed to comply with the requirements of Analog Devices’ Anaconda and Diamondback ADSL over POTS reference designs • Operating and storage temperature range: -40° to +85° C • Meets IEC 695, 2-2 flammability requirements • Designed to comply with the requirements of UL60950 • and EN60950 safety requirements for ADSL applications PWB Process Capability: standard printed wiring board assembly techniques, total-immersion cleaning • Minimum interwinding breakdown voltage of 1500 Vrms Reliability testing: shock, vibration, temperature cycling, temperature - humidity - bias • ELECTRICAL SPECIFICATIONS AT 25° C Turns Ratio ±2% Inductance1 mH ±10% Leakage Inductance µH max Chip : Line Line Side Line Side Chip Side 1 : 1.1 2 10 3.4 Part Number S560-6600-DB DCR Ω max Longitudinal Balance2 dB min Insertion Loss2 dB max Frequency Response2 dB max Harmonic Distortion2 dB max Line Side 100 kHz 1.1 MHz 300 kHz 100 kHz 1.1 MHz 4 Vac 40 kHz 3.8 46 0.5 ±0.5 -80 All measurements are made with pins 2 and 3 connected and pins 6 and 7 connected 1. Inductance measured at 10 kHz, 0.1 Vac 2. Measured with line impedance of 100 Ω SCHEMATIC S560-6600-DB 1 8 3 5 2 7 4 6 Line Chip ©2002 Bel Fuse Inc. Specifications subject to change without notice. 01.02 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com page 1 ADSL Magnetics TM02393 MECHANICAL 1 0.061 [1.55] 4 S560-6600-DB 0.324 [8.23] 5 8 0.098 [2.50] 0.048 [1.22] Suggested PCB Pad Layout 0.385 [9.78] max 0.339 [8.61] max 0.450 [11.43] max 0.098 [2.50] 0.024 [0.61] 0.227 [5.77] 0.299 [7.59] Dimensions are in inches [millimeters]. Standard dimension tolerance is ±0.005 [0.13] unless otherwise noted. Tape and Reel Packaging 24 mm wide by 16 mm pitch; 13 inch OD, 4 inch ID 300 components per reel, maximum Meets ANSI/EIA 481-2 Carrier Tape Standards User Feed Direction Orientation of Component Inside Pocket ©2002 Bel Fuse Inc. Specifications subject to change without notice. 01.02 CORPORATE FAR EAST EUROPE Bel Fuse Inc. 206 Van Vorst Street Jersey City, NJ 07302 Tel 201-432-0463 Fax 201-432-9542 www.belfuse.com Bel Fuse Ltd. 8F / 8 Luk Hop Street San Po Kong Kowloon, Hong Kong Tel 852-2328-5515 Fax 852-2352-3706 www.belfuse.com Bel Fuse Europe Ltd. Preston Technology Management Centre Marsh Lane, Suite G7, Preston Lancashire, PR1 8UD, U.K. Tel 44-1772-556601 Fax 44-1772-888366 www.belfuse.com page 2