CEL UPD5713TK_1

DATA SHEET
CMOS INTEGRATED CIRCUIT
+PD5713TK
WIDE BAND SPDT SWITCH
DESCRIPTION
The +PD5713TK is a CMOS MMIC for wide band SPDT (Single Pole Double Throw) switch which were developed
for mobile communications, wireless communications and other general-purpose RF switching application.
This device can operate frequency from 0.05 to 2.5 GHz, having the low insertion loss and high isolation.
This device is housed in a 6-pin lead-less minimold (1511) package. And this package is able to high-density
surface mounting.
FEATURES
• Supply voltage
: VDD = 1.8 to 3.6 V (2.8 V TYP.)
• Switch control voltage
: Vcont (H) = 1.8 to 3.6 V (2.8 V TYP.)
: Vcont (L) = <0.2 to +0.4 V (0 V TYP.)
• Low insertion loss
: Lins1 = 0.6 dB TYP. @ f = 0.05 to 1.0 GHz, VDD = 2.8 V, Vcont (H) = 2.8 V, Vcont (L) = 0 V
: Lins2 = 0.8 dB TYP. @ f = 1.0 to 2.0 GHz, VDD = 2.8 V, Vcont (H) = 2.8 V, Vcont (L) = 0 V
: Lins3 = 0.95 dB TYP. @ f = 2.0 to 2.5 GHz, VDD = 2.8 V, Vcont (H) = 2.8 V, Vcont (L) = 0 V
• High isolation
: ISL1 = 32.5 dB TYP. @ f = 0.05 to 1.0 GHz, VDD = 2.8 V, Vcont (H) = 2.8 V, Vcont (L) = 0 V
: ISL2 = 25 dB TYP. @ f = 1.0 to 2.0 GHz, VDD = 2.8 V, Vcont (H) = 2.8 V, Vcont (L) = 0 V
: ISL3 = 22.5 dB TYP. @ f = 2.0 to 2.5 GHz, VDD = 2.8 V, Vcont (H) = 2.8 V, Vcont (L) = 0 V
• Handling power
: Pin (1 dB) = +21.0 dBm TYP. @ f = 1.0 GHz, VDD = 2.8 V, Vcont (H) = 2.8 V, Vcont (L) = 0 V
: Pin (0.1 dB) = +17.0 dBm TYP. @ f = 1.0 GHz, VDD = 2.8 V, Vcont (H) = 2.8 V, Vcont (L) = 0 V
• High-density surface mounting : 6-pin lead-less minimold package (1.5 = 1.1 = 0.55 mm)
APPLICATIONS
• Mobile communications
• Wireless communications
• Another general-purpose RF switching applications
ORDERING INFORMATION
Part Number
Order Number
+PD5713TK-E2
+PD5713TK-E2-A
Package
6-pin lead-less minimold
(1511) (Pb-Free)
Marking
C3Q
Supplying Form
% Embossed tape 8 mm wide
% Pin 1, 6 face the perforation side of the tape
% Qty 5 kpcs/reel
Remark To order evaluation samples, contact your nearby sales office.
Part number for sample order: +PD5713TK-A
Caution Observe precautions when handling because these devices are sensitive to electrostatic discharge.
The information in this document is subject to change without notice. Before using this document, please confirm
that this is the latest version.
Document No. PU10627EJ01V0DS (1st edition)
Date Published September 2006 NS CP(K)
+PD5713TK
PIN CONNECTIONS AND INTERNAL BLOCK DIAGRAM
(Top View)
2
3
C3Q
1
(Top View)
(Bottom View)
6
1
6
6
1
5
2
5
5
2
4
3
4
4
3
Pin No.
Pin Name
1
OUTPUT1
2
GND
3
OUTPUT2
4
Vcont
5
INPUT
6
VDD
TRUTH TABLE
Vcont
INPUT<OUTPUT1
INPUT<OUTPUT2
Low
OFF
ON
High
ON
OFF
ABSOLUTE MAXIMUM RATINGS (TA = +25$C, unless otherwise specified)
Parameter
Symbol
Ratings
Unit
Supply Vo lt age
VDD
<0.5 to +4.6
V
Switch Control Voltage
Vcont
<0.5 to +4.6
V
Vcont (H)
+0.5
V
Voltage Difference
< VDD
Input Power
Pin
+23
dBm
Operating Ambient Temperature
TA
<45 to +85
$C
Storage Temperature
Tstg
<55 to +150
$C
RECOMMENDED OPERATING RANGE (TA = +25$C, unless otherwise specified)
Parameter
Symbol
MIN.
TYP.
MAX.
Unit
VDD
+1.8
+2.8
+3.6
V
Switch Control Voltage (H)
Vcont (H)
+1.8
+2.8
+3.6
V
Switch Control Voltage (L)
Vcont (L)
<0.2
0
+0.4
V
Supply Vo lt age
Remark VDD < 0.4 V ) Vcont (H) ) VDD + 0.2 V
2
Data Sheet PU10627EJ01V0DS
+PD5713TK
ELECTRICAL CHARACTERISTICS
(TA = +25$C, VDD = 2.8 V, Vcont (H) = 2.8 V, Vcont (L) = 0 V, DC cut capacitors = 1 000 pF, unless
otherwise specified)
Parameter
Symbol
Test Conditions
MIN.
TYP.
MAX.
Unit
Insertion Loss 1
Lins1
f = 0.05 to 1.0 GHz
<
0.6
0.8
dB
Insertion Loss 2
Lins2
f = 1.0 to 2.0 GHz
<
0.8
1.0
dB
Insertion Loss 3
Lins3
f = 2.0 to 2.5 GHz
<
0.95
1.2
dB
Isolation 1
I S L1
f = 0. 05 t o 1. 0 G H z
30
32 . 5
<
dB
Isolation 2
I S L2
f = 1. 0 t o 2 . 0 G H z
22
25
<
dB
Isolation 3
I S L3
f = 2. 0 t o 2 . 5 G H z
20
22 . 5
<
dB
Input Return Loss
RLin
f = 0.05 to 2.5 GHz
13
17
<
dB
Output Return Loss
RLout
f = 0.05 to 2.5 GHz
13
17
<
dB
+ 1 3. 0
+ 1 7. 0
<
dBm
f = 1.0 GHz
<
+21.0
<
dBm
0.1 dB Loss Compression
Input Power
1 dB Loss Compression
Input Power
Pin (0.1 dB) f = 1.0 GHz
Note 1
Pin (1 dB)
Note 2
Supply Current
IDD
VDD = Vcont = 2.8 V, RF off
<
0.01
1.0
+A
Switch Control Current
Icont
VDD = Vcont = 2.8 V, RF off
<
0.01
1.0
+A
Switch Control Speed
tSW
f = 1.0 GHz
<
30
100
ns
Notes 1. Pin (0.1 dB) is measured the input power level when the insertion loss increases more 0.1 dB than that of
linear range.
2. Pin (1 dB) is measured the input power level when the insertion loss increases more 1 dB than that of linear
range.
Caution It is necessary to use DC cut capacitors with this device.
The value of DC cut capacitors should be chosen to accommodate the frequency of operation,
bandwidth, switching speed and the condition with actual board of your system.
Data Sheet PU10627EJ01V0DS
3
+PD5713TK
EVALUATION CIRCUIT
VDD
Vcont
INPUT
C0
1 000 pF
1 000 pF
6
1
5
2
4
3
C0
OUTPUT1
C0
OUTPUT2
Remark C0 = 1 000 pF
Caution This IC has pull down resistance between RF line and GND, which fixes electric potential of RF line
to 0 V, then the IC cannot be used for DC switching.
The application circuits and their parameters are for reference only and are not intended for use in actual design-ins.
4
Data Sheet PU10627EJ01V0DS
+PD5713TK
ILLUSTRATION OF THE TEST CIRCUIT ASSEMBLED ON EVALUATION BOARD
Vcont
6pinL2MM SPDT SW
Vc2
OUTPUT2
C2
C
2
C
4
OUT 2
INPUT
C3Q
C1
C3
C1
C1
IN
C
1
C
5
C2
OUT 1
OUTPUT1
Vc1
VDD
USING THE NEC EVALUATION BOARD
Symbol
Values
C1, C2, C3
1 000 pF
C4, C5
1 000 pF
Data Sheet PU10627EJ01V0DS
5
+PD5713TK
TYPICAL CHARACTERISTICS
(TA = +25$C, VDD = 2.8 V, Vcont (H) = 2.8 V, Vcont (L) = 0 V, Pin = 0 dBm, DC cut capacitors = 1 000 pF,
unless otherwise specified)
INPUT–OUTPUT2
INSERSION LOSS vs. FREQUENCY
INPUT–OUTPUT1
INSERSION LOSS vs. FREQUENCY
1: –0.584 dB
0.5 GHz
2: –0.659 dB
1.0 GHz
3: –0.730 dB
1.5 GHz
4: –0.811 dB
2.0 GHz
5: –0.924 dB
2.5 GHz
Insersion Loss Lins (dB)
2.0
1.5
1.0
0.5
0
1
–0.5
2
–1.0
3
4
–1.5
5
2.5
–2.0
0
40
1.0
0.5
0
1
–0.5
2
–1.0
1.0
1.5
2.0
3.0
2.5
10
0
–10
–20
–30
0
1.5
2.0
5
0.5
1.0
2.5
Frequency f (GHz)
INPUT–OUTPUT1
ISOLATION vs. FREQUENCY
INPUT–OUTPUT2
ISOLATION vs. FREQUENCY
40
20
2
3
4
5
10
0
–10
–20
–30
1
2
–40
–50
3.0
1: –39.0 dB
0.5 GHz
2: –31.8 dB
1.0 GHz
3: –27.9 dB
1.5 GHz
4: –24.4 dB
2.0 GHz
5: –21.6 dB
2.5 GHz
30
1
–40
3
4
5
2.0
2.5
–50
–60
0
0.5
1.0
1.5
2.0
2.5
0
3.0
0.5
Frequency f (MHz)
40
10
0
–10
1
–20
2
–30
3
4
3.0
1: –26.4 dB
0.5 GHz
2: –21.8 dB
1.0 GHz
3: –19.6 dB
1.5 GHz
4: –18.5 dB
2.0 GHz
5: –18.3 dB
2.5 GHz
30
Input Return Loss RLin (dB)
20
1.5
INPUT–OUTPUT2
INPUT RETURN LOSS vs. FREQUENCY
40
1: –26.0 dB
0.5 GHz
2: –21.5 dB
1.0 GHz
3: –19.5 dB
1.5 GHz
4: –18.3 dB
2.0 GHz
5: –18.9 dB
2.5 GHz
30
1.0
Frequency f (MHz)
INPUT–OUTPUT1
INPUT RETURN LOSS vs. FREQUENCY
Input Return Loss RLin (dB)
4
Frequency f (GHz)
Isolation ISL (dB)
20
5
–40
20
10
0
–10
1
–20
–30
2
3
4
5
1.0
1.5
2.0
2.5
–40
–50
–50
–60
–60
0
0.5
1.0
1.5
2.0
2.5
3.0
0
0.5
Frequency f (MHz)
Frequency f (MHz)
Remark The graphs indicate nominal characteristics.
6
3
–1.5
–2.5
0.5
1: –38.2 dB
0.5 GHz
2: –31.7 dB
1.0 GHz
3: –27.4 dB
1.5 GHz
4: –23.9 dB
2.0 GHz
5: –22.4 dB
2.5 GHz
30
Isolation ISL (dB)
1.5
–2.0
–2.5
–60
1: –0.584 dB
0.5 GHz
2: –0.653 dB
1.0 GHz
3: –0.731 dB
1.5 GHz
4: –0.826 dB
2.0 GHz
5: –0.968 dB
2.5 GHz
2.0
Insersion Loss Lins (dB)
2.5
Data Sheet PU10627EJ01V0DS
3.0
+PD5713TK
INPUT–OUTPUT2
OUTPUT RETURN LOSS vs. FREQUENCY
INPUT–OUTPUT1
OUTPUT RETURN LOSS vs. FREQUENCY
40
1: –23.6 dB
0.5 GHz
2: –22.4 dB
1.0 GHz
3: –19.0 dB
1.5 GHz
4: –19.4 dB
2.0 GHz
5: –18.5 dB
2.5 GHz
30
20
10
0
–10
Output Return Loss RLout (dB)
Output Return Loss RLout (dB)
40
1
–20
2
–30
3
4
5
–40
–50
1: –24.4 dB
0.5 GHz
2: –22.9 dB
1.0 GHz
3: –20.0 dB
1.5 GHz
4: –20.6 dB
2.0 GHz
5: –19.4 dB
2.5 GHz
30
20
10
0
–10
1
–20
–30
2
3
4
5
1.5
2.0
2.5
–40
–50
–60
–60
0
0.5
1.0
1.5
2.0
2.5
3.0
0
0.5
1.0
3.0
Frequency f (MHz)
Frequency f (MHz)
OUTPUT POWER vs. INPUT POWER
+35
Output Power Pout (dBm)
f = 1 GHz
+30
+25
+20
+15
+10
+5
+5
+10
+15
+20
+25
+30
+35
Input Power Pin (dBm)
Remark The graphs indicate nominal characteristics.
Data Sheet PU10627EJ01V0DS
7
+PD5713TK
MOUNTING PAD DIMENSIONS
6-PIN LEAD-LESS MINIMOLD (1511) (UNIT: mm)
1.10
0.45
0.26
0.48
0.48
Remark The mounting pad layouts in this document are for reference only.
8
Data Sheet PU10627EJ01V0DS
+PD5713TK
PACKAGE DIMENSIONS
6-PIN LEAD-LESS MINIMOLD (1511) (UNIT: mm)
(Bottom View)
0.16±0.05
0.48±0.05 0.48±0.05
1.1±0.1
0.2±0.1
0.9±0.1
0.11+0.1
–0.05
1.3±0.05
0.55±0.03
1.5±0.1
(Top View)
Data Sheet PU10627EJ01V0DS
9
+PD5713TK
RECOMMENDED SOLDERING CONDITIONS
This product should be soldered and mounted under the following recommended conditions.
For soldering
methods and conditions other than those recommended below, contact your nearby sales office.
Soldering Method
Infrared Reflow
Wave Soldering
S o l d e r i n g Con dit io n s
Co ndi ti on Sym bo l
Peak temperature (package surface temperature)
: 260$C or below
Time at peak temperature
: 10 seconds or less
Time at temperature of 220$C or higher
: 60 seconds or less
Preheating time at 120 to 180$C
: 120(30 seconds
Maximum number of reflow processes
: 3 times
Maximum chlorine content of rosin flux (% mass)
: 0.2%(Wt.) or below
Peak temperature (molten solder temperature)
: 260$C or below
Time at peak temperature
: 10 seconds or less
IR260
WS260
Preheating temperature (package surface temperature) : 120$C or below
Maximum number of flow processes
Partial Heating
: 1 time
Maximum chlorine content of rosin flux (% mass)
: 0.2%(Wt.) or below
Peak temperature (terminal temperature)
: 350$C or below
Soldering time (per side of device)
: 3 seconds or less
Maximum chlorine content of rosin flux (% mass)
: 0.2%(Wt.) or below
Caution Do not use different soldering methods together (except for partial heating).
10
Data Sheet PU10627EJ01V0DS
HS350
4590 Patrick Henry Drive
Santa Clara, CA 95054-1817
Telephone: (408) 919-2500
Facsimile: (408) 988-0279
Subject: Compliance with EU Directives
CEL certifies, to its knowledge, that semiconductor and laser products detailed below are compliant
with the requirements of European Union (EU) Directive 2002/95/EC Restriction on Use of Hazardous
Substances in electrical and electronic equipment (RoHS) and the requirements of EU Directive
2003/11/EC Restriction on Penta and Octa BDE.
CEL Pb-free products have the same base part number with a suffix added. The suffix –A indicates
that the device is Pb-free. The –AZ suffix is used to designate devices containing Pb which are
exempted from the requirement of RoHS directive (*). In all cases the devices have Pb-free terminals.
All devices with these suffixes meet the requirements of the RoHS directive.
This status is based on CEL’s understanding of the EU Directives and knowledge of the materials that
go into its products as of the date of disclosure of this information.
Restricted Substance
per RoHS
Concentration Limit per RoHS
(values are not yet fixed)
Concentration contained
in CEL devices
-A
Not Detected
Lead (Pb)
< 1000 PPM
Mercury
< 1000 PPM
Not Detected
Cadmium
< 100 PPM
Not Detected
Hexavalent Chromium
< 1000 PPM
Not Detected
PBB
< 1000 PPM
Not Detected
PBDE
< 1000 PPM
Not Detected
-AZ
(*)
If you should have any additional questions regarding our devices and compliance to environmental
standards, please do not hesitate to contact your local representative.
Important Information and Disclaimer: Information provided by CEL on its website or in other communications concerting the substance
content of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowledge and belief on information
provided by third parties and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better
integrate information from third parties. CEL has taken and continues to take reasonable steps to provide representative and accurate
information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. CEL and CEL
suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for
release.
In no event shall CEL’s liability arising out of such information exceed the total purchase price of the CEL part(s) at issue sold by CEL to
customer on an annual basis.
See CEL Terms and Conditions for additional clarification of warranties and liability.