CPC1218Y 4-Pin SIP OptoMOS® Relay Blocking Voltage Load Current CPC1218Y 60 Units VP 600 Max RON 0.8 mA Ω Input Voltage to operate 5-12 V Description Features • • • • • • • • • • • 100% Solid State Voltage-controlled operation Matches popular reed relay pin-out Designed for use in security systems complying with EN50130-4 Small 4-Pin SIP Package TTL/CMOS Compatible input Arc-Free With No Snubbing Circuits 2500Vrms Input/Output Isolation No EMI/RFI Generation Immune to radiated EM fields Auto Pick & Place, Wave Solderable Applications • Security • Passive Infrared Detectors (PIR) • Data Signalling • Sensor Circuitry • Instrumentation • Multiplexers • Data Acquisition • Electronic Switching • I/O Subsystems • Energy Meters • Medical Equipment—Patient/Equipment Isolation • Aerospace • Industrial Controls The CPC1218Y is a miniature voltage-controlled 1-Form-A Solid State Relay in a 4-pin Single In-line Package (SIP) that employs optically coupled MOSFET technology to provide 2500Vrms of input to output isolation. The super efficient MOSFET switches and photovoltaic die use Clare’s patented OptoMOS® architecture. The optically-coupled output is controlled by the input's highly efficient GaAlAs infrared LED and a built-in series resistor to provide input voltage-controlled operation. The CPC1218Y features a pin-out that matches many popular reed relays and is thus a "drop-in" solid state replacement. Because the input is solid state there is no need for snubbers or "catch" diodes to suppress the inductive fly back transient voltage normally associated with EMR coils. Approvals • UL recognized file #E76270 • Certified to EN60950 Ordering Information Part # CPC1218Y Description 4-Pin SIP (25/tube) Pin Configuration CPC1218Y Pinout 1 2 + 3 – 4 Switching Characteristics of Normally Open (Form A) Devices 10ms CONTROL + 90% LOAD 10%+ 10%+ TON DS-CPC1218Y-R01 www.clare.com TOFF 1 CPC1218Y Absolute Maximum Ratings (@ 25˚ C) Parameter Blocking Voltage Ratings 60 Units VP 5 V Reverse Input Voltage 1 Input Control Voltage 15 V Input Power Dissipation 300 mW Total Power Dissipation 1 800 mW Isolation Voltage Input to Output 1500 Vrms Operational Temperature -40 to +85 °C Storage Temperature -40 to +125 °C Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied. Derate Linearly 6.67 mw / ºC Electrical Characteristics Parameter Output Characteristics @ 25°C Load Current, Continuous 1 Peak Load Current On-Resistance 2 Off-State Leakage Current Switching Speeds Turn-On Turn-Off Output Capacitance Input Characteristics @ 25°C Input Control Voltage (must operate) Conditions Symbol Min Typ Max Units VIN=5V IL - - 600 mA t≤10ms ILPK - - 1 IL=100mA RON - - 0.8 A Ω VL=60V ILEAK - - 1 µA VIN=5V, VL=10V TON - - 5 ms VIN=5V, VL=10V TOFF - - 5 ms 50V; f=1MHz COUT - 25 - pF IL=600mA VOP 3.75 - - V - VOFF - - 1 V VR=5V IR - - 10 Input Resistor Common Characteristics @ 25°C - - 950 1K 1050 µA Ω Capacitance Input to Output - - - 1 - pF Off Voltage (must be off) Reverse Input Current 1 2 2 Load current derates linearly from 600mA @ 25oC to 480mA @80oC. Measurement taken within 1 second of on time. www.clare.com R01 CPC1218Y PERFORMANCE DATA* CPC1218Y Typical On-Resistance Distribution (Ambient Temperature = 25ºC) (Load Current = 100mA, VIN = 5V) 35 35 20 15 10 Device Count (N) 25 25 20 15 10 5 0.54 0.56 0.58 0.60 0.62 0 0.66 0.64 63.5 On-resistance (Ω) 20 20 15 10 5 1.5 1.55 0.80 1.6 1.65 1.7 64.0 64.5 65.0 65.5 66.0 10 5 0 66.5 1.75 CPC1218Y Typical Turn-On Time (Ambient Temperature = 25ºC) (Load Current = 100mA; VIN = 5V) 10 5 0.41 0.43 0.45 0.47 0.49 0.51 Turn-On (ms) CPC1218Y Typical Maximum Load Current vs. Temperature CPC1218Y Typical Leakage vs. Temperature (Measured across Pins 3 & 4) VL = max rated 0.016 Leakage (µA) 0.65 0.60 0.55 VIN =10V 0.50 0.45 VIN =5V 0.40 40 60 80 100 0.012 0.010 0.008 0.006 0.004 0.002 0 120 -40 -20 Temperature (ºC) CPC1218Y Typical Turn-On vs. Temperature (Load Current = 100mA) VIN = 5V VIN = 10V -40 -20 0 20 40 20 40 60 Temperature (ºC) 80 100 0.60 0.55 0.50 0.45 0.40 0.35 0.30 0.25 0.20 0.15 0.10 0.19 0.20 60 80 20 40 0.23 0.24 0.25 68 66 64 62 60 -40 -20 0 20 40 60 80 100 Temperature (ºC) VIN = 5V 0 0.22 70 58 100 VIN = 10V -20 0.21 CPC1218Y Typical Blocking Voltage vs. Temperature CPC1218Y Typical Turn-Off vs. Temperature (Load Current = 100mA) -40 1.8 5 Temperature (ºC) Turn-Off (ms) 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0.0 0 1.75 10 72 60 Temperature (ºC) 80 100 Turn-On (ms) 20 1.7 Turn-Off (ms) Blocking Voltage (V) 0.70 1.65 15 0 0.014 0 1.6 20 0.53 Input Voltage (V) -20 1.55 CPC1218Y Typical Turn-Off Time (Ambient Temperature = 25ºC) (Load Current = 100mA; VIN = 5V) 25 15 0 1.8 0.75 -40 1.5 Input Voltage (V) Device Count (N) 25 Device Count (N) Device Count (N) 25 0 Load Current (A) 15 Blocking Voltage (V) CPC1218Y Typical VOFF for Switch Dropout (Ambient Temperature = 25ºC) (Load Current = 100mA) Turn-On (ms) 20 5 0 0.35 25 30 Device Count (N) Device Count (N) 30 CPC1218Y Typical Input Voltage for Switch Operation (Ambient Temperature = 25ºC) (Load Current = 100mA) CPC1218Y Typical Blocking Voltage Distribution (Ambient Temperature = 25ºC) 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 CPC1218Y Typical Turn-On vs. Input Voltage (Load Current = 100mA) 0 5 10 15 20 Input Voltage (V) *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. R01 www.clare.com 3 CPC1218Y PERFORMANCE DATA* CPC1218Y Typical Turn-Off vs. Input Voltage (Load Current = 100mA) 0.9 On-Resistance (Ω) Turn-Off (ms) 0.6 0.5 0.4 0.3 0.2 0.1 0 0 2 4 6 8 10 12 14 16 18 VIN = 10V 0.7 Steady State 0.6 0.5 0.4 0.3 20 1.25 1.20 0 20 40 60 Temperature (ºC) 1.25 -40 -20 0 20 40 60 80 1.15 100 -40 80 100 200 0 -200 -400 -0.2 -0.1 0 0.1 Load Voltage (V) 0 20 40 60 80 100 CPC1218Y Energy Rating Curve 400 -600 -0.3 -20 Temperature (ºC) Load Current (A) Load Current (mA) Input Voltage (V) 1.30 -20 1.30 600 1.35 -40 1.35 CPC1218Y Typical Load Current vs. Load Voltage (Ambient Temperature = 25oC) VIN = 5V 1.40 1.15 1.40 Temperature (ºC) CPC1218Y Typical Input Voltage for Switch Dropout vs. Temperature (Load Current = 100mA) CPC1218Y Typical Input Voltage for Switch Operation vs. Temperature (Load Current = 100mA) 1.20 Input Voltage (V) 1.45 1.45 VIN = 5V 0.8 Input Voltage (V) 0.7 CPC1218Y Typical On-Resistance vs. Temperature (Load Current = max rated @ temperature) 0.2 0.3 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 10µs 100µs 1ms 10ms 100ms 1s 10s 100s Time *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. 4 www.clare.com R01 Manufacturing Information Soldering Recommended soldering processes are limited to 245ºC component body temperature for 10 seconds. Washing Clare does not recommend ultrasonic cleaning or the use of chlorinated solvents. MECHANICAL DIMENSIONS 4-Pin SIP 3.302 ± 0.051 (0.130 ± 0.002) 19.202 ± 0.381 (0.756 ± 0.015) 6.401 ± 0.127 (0.252 ± 0.005) 2.642 ± 0.127 TYP (0.104 ± 0.005 TYP) 5.944 ± 0.127 TYP (0.234 ± 0.005 TYP) PIN 1 0.457 ± 0.076 TYP (0.018 ± 0.003 TYP) 5.080 ± 0127 (0.200 ± 0.005) 3.251 ± 0.102 (0.128 ± 0.004) 5.080 ± 0127 (0.200 ± 0.005) 0.254 ± 0.013 (0.010 ± 0.0005) NOTES: 1. Leadframe thickness does not include plating. (1000 microinches maximum) 2. Pin location tolerances are non-accumulative. Dimensions: mm (inches) For additional information please visit our website at: www.clare.com Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in Clare’s Standard Terms and Conditions of Sale, Clare, Inc. assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of Clare’s product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. Clare, Inc. reserves the right to discontinue or make changes to its products at any time without notice. Specification: DS-CPC1218Y-R01 ©Copyright 2005, Clare, Inc. OptoMOS® is a registered trademark of Clare, Inc. All rights reserved. Printed in USA. 8/22/05 5