PLA110L Single Pole OptoMOS® Relays Load Voltage Load Current Max RON PLA110L 400 150 25 Units V mA Ω Features • Small 6 Pin DIP Package • Low Drive Power Requirements (TTL/CMOS Compatible) • No Moving Parts • High Reliability • Arc-Free With No Snubbing Circuits • 3750VRMS Input/Output Isolation • No EMI/RFI Generation • Machine Insertable, Wave Solderable • Current Limiting, Surface Mount and Tape & Reel Versions Available Applications • Telecommunications • Telecom Switching • Tip/Ring Circuits • Modem Switching (Laptop, Notebook, Pocket Size) • Hookswitch • Dial Pulsing • Ground Start • Ringer Injection • Instrumentation • Multiplexers • Data Acquisition • Electronic Switching • I/O Subsystems • Meters (Watt-Hour, Water, Gas) • Medical Equipment-Patient/Equipment Isolation • Security • Aerospace • Industrial Controls Description PLA110L is a 1-Form-A solid state relay which uses optically coupled MOSFET technology to provide 3750V of input to output isolation. The efficient current limited MOSFET switches and photovoltaic die use Clare’s patented OptoMOS® architecture. The optically-coupled input is controlled by a highly efficient GaAIAs infrared LED. The PLA110L can be used to replace mechanical relays and offers the superior reliability associated with semiconductor devices. Because they have no moving parts, they can offer faster, bounce-free switching in a more compact surface mount or through hole package. Approvals • UL Recognized: File Number E76270 • CSA Certified: File Number LR 43639-10 • BSI Certified: • BS EN 60950:1992 (BS7002:1992) Certificate #:7344 • BS EN 41003:1993 Certificate #:7344 Ordering Information Part # PLA110L PLA110LS PLA110LSTR Description 6 Pin Dip (50/Tube) 6 Pin Surface Mount (50/Tube) 6 Pin Surface Mount (1000/Reel) Pin Configuration PLA110L Pinout PLA110L Pinout AC/DC Configuration DC Only Configuration + Control Ð Control NC 1 6 2 5 3 4 Load + Control Do Not Use Ð Control NC Load 1 6 2 5 3 4 + Load Ð Load 10ms CONTROL LOAD 10%+ +90% TON DS-PLA110L-R4.0 www.clare.com 10%+ TOFF 1 PLA110L Absolute Maximum Ratings (@ 25˚ C) Parameter Input Power Dissipation Input Control Current Peak (10ms) Reverse Input Voltage Total Power Dissipation Isolation Voltage Input to Output Operational Temperature Storage Temperature Soldering Temperature DIP Package Surface Mount Package (10 Seconds Max.) 1 Derate Linearly 1.33 mw/˚C 2 Derate Linearly 6.67 mw/˚C Min - Typ - Max Units 1501 mW 50 mA 1 A 5 V 8002 mW 3750 -40 -40 - +85 +125 VRMS °C °C - - +260 +220 °C °C Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at these or any other conditions beyond those indicated in the operational sections of this data sheet is not implied. Exposure of the device to the absolute maximum ratings for an extended period may degrade the device and effect its reliability. Electrical Characteristics Parameter Output Characteristics @ 25°C Load Voltage (Peak) Load Current (Continuous) AC/DC Configuration DC Configuration Peak Load Current On-Resistance AC/DC Configuration DC Configuration Off-State Leakage Current Switching Speeds Turn-On Turn-Off Output Capacitance Load Current Limiting Input Characteristics @ 25°C Input Control Current Input Dropout Current Input Voltage Drop Reverse Input Voltage Reverse Input Current Common Characteristics @ 25°C Input to Output Capacitance Input to Output Isolation 2 Conditions Symbol Min Typ Max Units - VL - - 400 V 10ms IL IL IL - - 150 250 - mA mA mA IL=150mA IL=250mA VL=400V RON RON ILEAK - - 25 9 - Ω Ω µA IF=5mA, VL=10V IF=5mA, VL=10V 50V; f=1MHz TON TOFF COUT ICL - 1 0.25 190 25 235 280 ms ms pF mA IL=150mA IF=5mA VR=5V IF IF VF VR IR 5 0.4 0.9 - 0.7 1.2 - 50 1.4 5 10 mA mA V V µA - CI/O VI/O 3750 3 - - pF VRMS www.clare.com - - Rev. 4.0 PLA110L PERFORMANCE DATA* PLA110L Typical On-Resistance Distribution (N=50 Ambient Temperature = 25 °C) (Load Current = 150mADC; I F = 5mADC) 35 Device Count (N) 25 20 15 10 35 35 30 30 25 20 15 10 5 5 0 0 1.17 1.19 1.21 1.23 13.1 13.7 20 20 15 10 5 0 15.5 1.95 10 441.5 450.5 15 10 5 0 1.05 1.35 1.65 1.95 0.15 2.25 0.035 20 250 0.030 Load Current (mA) 300 200 150 20mA 10mA 5mA 100 50 0.09 0.11 0.13 0.15 -20 0 Turn-Off (ms) 0.020 0.015 0.010 20 40 60 80 100 -40 120 PLA110L Typical Turn-On vs. Temperature (Load Current = 150mADC) 0.120 460 2.0 1.5 1.0 455 0.5 450 0 0 20 40 60 Temperature (°C) 80 100 Turn-Off (ms) 0.140 2.5 Turn-On (ms) 3.0 -20 0 5mA 10mA 20mA -40 -20 0 20 40 60 Temperature (°C) 20 40 60 80 100 PLA110L Typical Turn-Off vs. Temperature (Load Current = 150mADC) 475 -40 -20 Temperature (°C) 480 465 0.45 0.025 Temperature (°C) 470 0.39 0 -40 PLA110L Typical Blocking Voltage vs. Temperature 0.33 0.005 0 0.07 0.27 PLA110L Typical Leakage vs. Temperature (Measured across Pins 4 & 6) 25 0.05 0.21 Turn-On (ms) PLA110L Typical Load Current vs. Temperature 0 486.5 20 LED Current (mA) 5 477.5 25 5 0.75 10 468.5 PLA110L Typical Turn-On Time (N=50 Ambient Temperature = 25 °C) (Load Current = 150mADC; I F = 5mADC) 10 2.25 15 459.5 Blocking Voltage (V) 0 1.65 15 16.1 15 PLA110L Typical Turn-Off Time (N=50 Ambient Temperature = 25 °C) (Load Current = 150mADC; I F = 5mADC) Device Count (N) 14.9 PLA110L Typical I F for Switch Dropout (N=50 Ambient Temperature = 25 °C) LED Current (mA) Blocking Voltage (V RMS) 14.3 Device Count (N) 25 Device Count (N) Device Count (N) 25 1.35 20 On-Resistance (Ω) PLA110L Typical I F for Switch Operation (N=50 Ambient Temperature = 25 °C) (Load Current = 150mADC) 1.05 25 0 1.25 LED Forward Voltage Drop (V) 0.75 PLA110L Typical Blocking Voltage Distribution (N=50 Ambient Temperature = 25 °C) 5 Leakage (µA) Device Count (N) 30 Device Count (N) PLA110L Typical LED Forward Voltage Drop (N=50 Ambient Temperature = 25 °C) IF = 5mADC 80 100 0.100 0.080 0.060 5mA 0.040 0.020 0 120 -40 -20 0 20 40 60 80 100 Temperature (°C) *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. Rev. 4.0 www.clare.com 3 PLA110L PERFORMANCE DATA* PLA110L Typical Turn-On vs. LED Forward Current (Load Current = 150mADC) PLA110L Typical LED Forward Voltage Drop vs. Temperature 0.40 LED Forward Voltage Drop (V) 1.8 0.12 0.35 1.6 0.10 1.4 50mA 30mA 20mA 10mA 5mA 1.2 1.0 Turn-Off (ms) Turn-On (ms) 0.30 0.25 0.20 0.15 0.10 0 -20 0 20 40 60 80 100 5 0.04 10 15 20 25 30 35 40 45 50 0 20 2.500 5 LED Current (mA) 3.000 2.500 LED Current (mA) 3.000 10 2.000 1.500 1.000 0 20 40 60 80 100 -40 Temperature (°C) 150 -20 0 20 40 60 80 100 30 35 40 45 50 2.000 1.500 1.000 -40 -20 0 20 40 60 80 100 Temperature (°C) Temperature (°C) PLA110L Typical Load Current vs. Load Voltage (Ambient Temperature = 25 °C) IF = 5mADC 25 0 0 -20 20 0.500 0.500 0 15 PLA110L Typical I F for Switch Dropout vs. Temperature (Load Current = 150mADC) 25 15 10 Forward Current (mA) PLA110L Typical I F for Switch Operation vs. Temperature (Load Current = 150mADC) PLA110L Typical On-Resistance vs. Temperature (Load Current = 150mADC; IF = 5mADC) -40 5 Forward Current (mA) Temperature (°C) On-Resistance (Ω) 0.06 0 0 120 0.08 0.02 0.05 0.8 -40 PLA110L Energy Rating Curve 1.2 1.0 100 Load Current (A) Load Current (mA) PLA110L Typical Turn-Off vs. LED Forward Current (Load Current = 150mADC) 50 0 -50 0.8 0.6 0.4 0.2 -100 -150 -2.5 -2.0 -1.5 -1.0 -0.5 0 0.5 1.0 1.5 2.0 2.5 Load Voltage (V) 0 10µs 100µs 1ms 10ms 100ms 1s 10s 100s Time *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. 4 www.clare.com Rev. 4.0 PLA110L MECHANICAL DIMENSIONS 8.382 ± .635 (.330 ± .025) 6 Pin DIP Through Hole (Standard) 2.540 ± .127 (.100 ± .005) 7.620 ± .254 (.300 ± .010) 7.239 TYP. (.285) 3.302 (.130) 6.350 ± .127 (.250 ± .005) 9.144 ± .508 (.360 ± .020) PC Board Pattern (Top View) 2.540 ± .127 (.100 ± .005) 9.525 ± .254 (.375 ± .010) 6.350 ± .127 (.250 ± .005) .254 TYP. (.010) 7.620 ± .127 (.300 ± .005) 5.080 ± .127 (.200 ± .005) 2.540 ± .127 (.100 ± .005) 3.302 (.130) 2.540 ± .127 (.100 ± .005) 6.350 ± .127 (.250 ± .005) 9.144 (.360) 8.382 ± .635 (.330 ± .025) 7.620 ± .254 (.300 ± .010) .635 TYP. (.025) 6-.800 DIA. (6-.031 DIA.) .457 ± .076 (.018 ± .003) 6 Pin DIP Surface Mount (“S” Suffix) 4.445 ± .127 (.175 ± .005) PC Board Pattern (Top View) 8.305 ± .127 (.327 ± .005) 1.905 ± .127 (.075 ± .005) .457 ± .076 (.018 ± .003) 1.499 ± .127 (.059 ± .005) Tape and Reel Packaging for 6 Pin Surface Mount Package 330.2 DIA. (13.00) Top Cover Tape Thickness .102 MAX. (.004) 6.731 MAX. 1.753 ± .102 (.265) (.069 ± .004) .406 MAX. (.016) 2.007 ± .102 1.498 ± .102 3.987 ± .102 (.079 ± .004) (.059 ± .004) (.157 ± .004) 7.493 ± .102 (.295 ± .004) 1 6 12.090 (.476) 10.100 (.398) 4.877 (.192) Top Cover Tape Embossed Carrier Embossment 16.002 ± .305 (.630 ± .012) .050R TYP. 11.989 ± .102 (.472 ± .004) 10.100 ± .102 (.398 ± .004) 1.549 ± .102 (.061 ± .004) User Direction of Feed Dimensions mm (inches) Rev. 4.0 www.clare.com Rev. 2.0 5 For additional information please visit our website at: www.clare.com Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in Clare’s Standard Terms and Conditions of Sale, Clare, Inc. assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of Clare’s product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. Clare, Inc. reserves the right to discontinue or make changes to its products at any time without notice. Specification: DS-PLA110L-R4.0 ©Copyright 2002, Clare, Inc. OptoMOS® is a registered trademark of Clare, Inc. All rights reserved. Printed in USA. 6/21/02