FMM1062ML GaAs MMIC FEATURES • Low Power Consumption: 60mW (Typ.) • Operation to 6.0 GHz • Input Frequency divide by 4, OUT and OUT • -3V (or+3V) DC Single Power Supply • External 50 ohm Load Driving Capability • Small 6-pin Plastic Package for SMT applications (ML) • Tape and Reel available DESCRIPTION The FMM1062ML is a GaAs Microwave Static Frequency Divider designed for dividing an input signal by 4 over a frequency range from 2.0 to 6.0 GHz. This part is designed for Synthesizer, Phase-Locked Oscillator, Electronic Toll Collection (ETC) applications. Eudyna’s stringent Quality Assurance Program assures the highest reliability and consistent performance. ABSOLUTE MAXIMUM RATINGS (Ambient Temperature Ta=25°C) Parameter Limit Symbol Min. Max. Unit Supply Voltage VDD -0.5 +4.5 V Input Voltage IDD - 40 mA Input Voltage Vin -0.5 VDD to +0.5 V Input Power Pin - +13.0 dBm Storage Temperature Tstg -65 +150 °C Power Dissipation PD - 0.12 W RECOMMENDED OPERATING CONDITIONS Parameter Supply Voltage Ambient Temperature Symbol Min. Limit Typ. Max. Unit VDD +2.7 +3.0 +3.6 V Ta -40 - +85 °C ELECTRICAL CHARACTERISTICS (Ambient Temperature Ta = -40~+85°C, VDD = +2.7~+3.6V) Limit Typ. Max. Unit - 21.0 - mA RL = 50Ω, fin = 5.8 GHz -8 -4 0 dBm fin Pin = 0dBm 2.0 - 6.0 GHz Pin fin = 2~6 GHz -5 0 +10 dBm Symbol Condition Min. Power Supply Current IDD VDD = 3.0V, Ta = 25°C Output Power Pout Operating Frequency Input Power Parameter CASE STYLE: ML 1. Electrical characteristics are assured on a lot basis by sample testing at an AQL = 0.1%, Level II. Any lot failure shall be 100% retested. 2. The package marking "FJHT" shows the part number, year and month of manufacturer. Where: "FJ" indicates the part number (FMM1062ML) "H" indicates the year (2000) "T" indicates the month (July) Edition 1.3 September 2004 1 FMM1062ML GaAs MMIC Test Circuit Positive Supply Voltage VDD = +3V Operation Circuit VDD = +3.0V 0.33µF 50Ω IN 1000pF 3 VDD 2 IN 1000pF 1000pF VSS 5 INPUT OUTPUT OUT 4 50Ω 50Ω OUTPUT OUT 6 1 1000pF Negative Supply Voltage VSS = -3V Operation Circuit 50Ω IN 1000pF 3 VDD 2 IN 1000pF 1000pF VSS 5 INPUT OUTPUT OUT 4 50Ω 50Ω OUTPUT OUT 6 1 1000pF 0.33µF VSS = -3.0V 2 FMM1062ML GaAs MMIC NOTES 3 FMM1062ML GaAs MMIC Case Style "ML" 1.9±0.2 (0.075) 1 0.4 +0.1 –0.05 (0.016) 2 MIN 0.2 (0.008) MIN 0.2 (0.008) 4 0.6±0.2 +0.2 1.6 –0.1 5 (0.063) (0.110) +0.4 6 0.4 +0.1 –0.05 (0.016) (0.024) 0.4 +0.1 –0.05 (0.016) 2.8 –0.3 0.1 0-15° 0.4 +0.1 –0.05 (0.016) 0~0.1 3 +0.1 0.5 +0.1 –0.05 (0.020) 0.4 –0.05 (0.016) 2.9±0.2 (0.114) +0.1 0.4 +0.1 –0.05 (0.016) +0.2 2355 Zanker Rd. San Jose, CA 95131-1138, U.S.A. TEL: (408) 232-9500 FAX: (408) 428-9111 Lead Designation 1. OUT 2. VSS 3. OUT 4. IN 5. VDD 6. IN Unit: mm (inches) 1.1 –0.1 (0.043) For further information please contact: Eudyna Devices USA Inc. 0.15–0.05 (0.006) 0.8±0.1 (0.031) Top View CAUTION Eudyna Devices Inc. products contain gallium arsenide (GaAs) which can be hazardous to the human body and the environment. For safety, observe the following procedures: www.us.eudyna.com • Do not put this product into the mouth. Eudyna Devices Europe Ltd. • Do not alter the form of this product into a gas, powder, or liquid through burning, crushing, or chemical processing as these by-products are dangerous to the human body if inhaled, ingested, or swallowed. Network House Norreys Drive Maidenhead, Berkshire SL6 4FJ United Kingdom TEL: +44 (0) 1628 504800 FAX: +44 (0) 1628 504888 Eudyna Devices Asia Pte Ltd. Hong Kong Branch Rm. 1101, Ocean Centre, 5 Canton Rd. Tsim Sha Tsui, Kowloon, Hong Kong TEL: +852-2377-0227 FAX: +852-2377-3921 • Observe government laws and company regulations when discarding this product. This product must be discarded in accordance with methods specified by applicable hazardous waste procedures. Eudyna Devices Inc. reserves the right to change products and specifications without notice. The information does not convey any license under rights of Eudyna Devices Inc. or others. © 2004 Eudyna Devices USA Inc. Printed in U.S.A. Eudyna Devices Inc. Sales Division 1, Kanai-cho, Sakae-ku Yokohama, 244-0845, Japan TEL: +81-45-853-8156 FAX: +81-45-853-8170 4