EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet(Preliminary) TOP View LEDs 67-21SUGC/B067/TR8 Features ․P-LCC-2 package. ․White package. ․Optical indicator. ․Colorless clear window. ․Wide viewing angle. ․Suitable for vapor-phase reflow, Infrared reflow and wave solder processes. ․Computable with automatic placement equipment. ․Available on tape and reel (8mm Tape). ․Pb-free. ․The product itself will remain within RoHS compliant version. ․Preconditioning: acc. to JEDEC Level 2 ․ESD: up to 2KV acc. to JESD22-A114-B Descriptions ․The 67-21 series is available in soft orange, green,blue and yellow. Due to the package design, the LED has wide viewing angle and optimized light coupling by inter reflector. This feature makes ideal for light pipe application. The low current requirement makes this device ideal for portable equipment or any other application where power is at a premium. Applications ․Automotive: backlighting in dashboard and switch. ․Telecommunication: indicator and backlighting in telephone and fax. ․Flat backlight for LCD, switch and symbol. ․Light pipe application. ․General use. Device Selection Guide Chip Material Emitted Color InGaN/SiC Brilliant Green Lens Color Water Clear Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : Prepared date:05-Sep-2006 Rev. 1 Page: 1 of 9 Prepared by: Ray Yuan EVERLIGHT ELECTRONICS CO.,LTD. 67-21SUGC/B067/TR8 Package Dimensions 2.2 0.1 2.7 0.2 3.1 0.2 2.4 Polarity Cathode 3.5 0.2 2.7 0.2 0.8 2.2 0.1 0.8 1.9 0.2 0.15 0.5 0.1 Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : Prepared date:05-Sep-2006 Rev. 1 Page: 2 of 9 Prepared by: Ray Yuan EVERLIGHT ELECTRONICS CO.,LTD. 67-21SUGC/B067/TR8 Absolute Maximum Ratings (Ta=25℃) Parameter Symbol Rating Unit Reverse Voltage VR 12 V Forward Current IF 30 mA Peak Forward Current ( tp≦10μs , duty≦0.005 ) IFP 100 mA Power Dissipation Pd 80 mW Junction Temperature Tj 100 ℃ Operating Temperature Topr -40 ~ +100 ℃ Storage Temperature Tstg -40~ +110 ℃ Soldering Temperature Tsol Reflow Soldering : 260 ℃ for 10 sec. Hand Soldering : 350 ℃ for 3 sec. Electro-Optical Characteristics (Ta=25℃) Parameter Symbol Min. Typ. Max. Unit Condition Luminous Intensity Iv 75 ----- 320 mcd IF=20mA Viewing Angle 2θ1/2 ----- 120 ----- deg IF=20mA Peak Wavelength λP ----- 518 ----- nm IF=20mA Dominant Wavelength λd 523 ----- 535 nm IF=20mA Spectrum Radiation Bandwidth △λ ----- 36 ----- nm IF=20mA Forward Voltage VF 2.6 ----- 3.8 V IF=20mA Reverse Current IR ----- ----- 10 μA VR=12V Notes: 1.Tolerance of Luminous Intensity ±11% 2.Tolerance of Dominant Wavelength ±1nm 3.Tolerance of Forward Voltage ±0.1V Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : Prepared date:05-Sep-2006 Rev. 1 Page: 3 of 9 Prepared by: Ray Yuan EVERLIGHT ELECTRONICS CO.,LTD. 67-21SUGC/B067/TR8 Bin Range Of Luminous Intensity Bin Min Q2 90 R1 112 R2 140 S1 180 S2 224 Notes: Max 112 140 180 224 280 Unit Condition mcd IF=20mA 1.Tolerance of Luminous Intensity ±11% Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : Prepared date:05-Sep-2006 Rev. 1 Page: 4 of 9 Prepared by: Ray Yuan EVERLIGHT ELECTRONICS CO.,LTD. 67-21SUGC/B067/TR8 Typical Electro-Optical Characteristics Curves Typical curve of spectral distribution: V(λ)=Standard eye response curve Relative Intensity (%) 100 V(λ) SUG 50 0 400 450 500 550 600 650 700 Wp (nm) Diagram characteristics of radiation: 20 30 View Angle 50 60 70 80 90 10 o 0 o 1.0 o o 0.8 o 0.6 o 0.4 o 0.2 o o 0 1.0 0.8 0.6 0.4 0.2 0 20 Relative Intensity Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : Prepared date:05-Sep-2006 o o 60 40 View Angle Rev. 1 o 80 o Page: 5 of 9 Prepared by: Ray Yuan Relative Intensity 40 o EVERLIGHT ELECTRONICS CO.,LTD. 67-21SUGC/B067/TR8 Forward Current vs. Forward Voltage Ta=25℃ Forward Current I F (mA) 100 10 1 2.5 2.7 2.9 3.1 3.3 3.5 3.7 3.9 For war d Voltage V F ( V) IF(mA) Forward current v.s. ambient temp. 40 35 30 25 20 15 10 5 0 0 20 40 60 80 100 T (degree C) Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : Prepared date:05-Sep-2006 Rev. 1 Page: 6 of 9 Prepared by: Ray Yuan EVERLIGHT ELECTRONICS CO.,LTD. 67-21SUGC/B067/TR8 Label explanation CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank RoHS REF: Forward Voltage Rank Reel Dimensions 2.2 0.5 178.0 1.0 60.0 1.0 9.0 1.0 12.0 1.0 13.0 0.5 Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : Prepared date:05-Sep-2006 Rev. 1 Page: 7 of 9 Prepared by: Ray Yuan EVERLIGHT ELECTRONICS CO.,LTD. 67-21SUGC/B067/TR8 Carrier Tape Dimensions: Loaded quantity 2000 PCS per reel. Progressive direction Polarity 4.0 0.23 1.75 3.5±0.05 1.5+0.1 8.0±0.3 4.0±0.1 1.75 2.0±0.05 3.23 2.24 Note: The tolerances unless mentioned is ±0.1mm Moisture Resistant Packaging Label Aluminum moisture-proof bag Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : Prepared date:05-Sep-2006 Desiccant Label Rev. 1 Page: 8 of 9 Prepared by: Ray Yuan EVERLIGHT ELECTRONICS CO.,LTD. 67-21SUGC/B067/TR8 Precautions For Use 1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less. 2.3 After opening the package: The LED's floor life is 1 year under 30 deg C or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 60±5℃ for 24 hours. 3. Soldering Condition 3.1 A. Pb-free solder temperature profile B. Recommend soldering pad 1~5 °C / Sec. 260°C. Max. 10 Sec. Max. Pre-heating 180~200°C 1.5 1.5 60 Sec. Max. Above 220°C 2.6 1~5 °C / Sec. 1.5 120 Sec. Max. 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. 4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : Prepared date:05-Sep-2006 Rev. 1 Page: 9 of 9 Prepared by: Ray Yuan