FAIRCHILD FSAV331_10

FSAV331 — Dual-Channel, 4:1 Video Switch
Features
Description
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
The Fairchild video switch FSAV331 is a dual 4:1 high
speed video switch which can be configured as either
multiplexer or demultiplexer. Low on-resistance allows
inputs to be connected to outputs without adding
propagation delay or generating additional ground
bounce noise.
Wide Bandwidth: 300MHz
-73dB Non-Adjacent Channel Crosstalk at 10MHz
-56dB Off Isolation at 10MHz
On Resistance: 3Ω (Typical)
Low Power Consumption: 3µA (Maximum)
When the OE Pin is LOW, S0 and S1 connect the A Port
to the selected B Port output. When the OE Pin is
HIGH, the switch is OPEN and a HIGH-Impedance state
exists between the two ports.
Control Inputs Compatible with TTL Level
Applications
ƒ
Y/C Video or CVBS Video Switch in LCD, Plasma,
and Projector Displays
Ordering Information
Part Number
Operating
Temperature Range
FSAV331MTCX
-40 to +85°C
© 2004 Fairchild Semiconductor Corporation
FSAV331 • Rev. 1.0.2
Package
16-Lead, Thin Shrink Small Outline Package
(TSSOP), JEDEC MO-153, 4.4mm Wide
Packing
Method
Tape and Reel
www.fairchildsemi.com
FAV331 — Dual Channel, 4:1 Video Switch
October 2010
FSAV331 — Dual-Channel, 4:1 Video Switch
Pin Configurations
Figure 1. Logic Diagram
Figure 2. Pin Assignments
Pin Descriptions
Pin #
Name
1, 15
/OE1, /OE2
Description
Port Enable
2, 14
S1, S0
3, 4, 5, 6
1B4, 1B3, 1B2, 1B1
7, 9
1A, 2A
A-Ports
Ground
8
GND
10, 11, 12, 13
2B1, 2B2, 2B3, 2B4
16
VCC
Select Input
B-Ports (Channel 1)
B-Ports (Channel 2)
Supply Voltage
Truth Table
S1
S0
/OE1
/OE2
Don’t Care
Don’t Care
Function
Don’t Care
HIGH
Don’t Care
Disconnect 1A
Don’t Care
Don’t Care
HIGH
Disconnect 2A
LOW
LOW
LOW
LOW
A=B1
LOW
HIGH
LOW
LOW
A=B2
HIGH
LOW
LOW
LOW
A=B3
HIGH
HIGH
LOW
LOW
A=B4
© 2004 Fairchild Semiconductor Corporation
FSAV331 • Rev. 1.0.2
www.fairchildsemi.com
2
Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be
operable above the recommended operating conditions and stressing the parts to these levels is not recommended.
In addition, extended exposure to stresses above the recommended operating conditions may affect device
reliability. The absolute maximum ratings are stress ratings only.
Symbol
Parameter
VCC
Supply Voltage
Min.
Max.
Unit
-0.5
+7.0
V
VS
DC Switch Voltage
-0.5
VCC+0.5
V
VIN
DC Input Voltage
(1)
-0.5
+7.0
V
IIK
DC Input Diode Current
-50
IOUT
DC Output Current
TSTG
Storage Temperature Range
ESD
Human Body Model, JESD22-A114
-65
mA
128
mA
+150
°C
2000
V
Note:
1. The input and output negative voltage ratings may be exceeded if the input and output diode current ratings are
observed.
Recommended Operating Conditions
FSAV331 — Dual-Channel, 4:1 Video Switch
Absolute Maximum Ratings
The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended
operating conditions are specified to ensure optimal performance to the datasheet specifications. Fairchild does not
recommend exceeding them or designing to Absolute Maximum Ratings.
Symbol
Parameter
Min.
Max.
Unit
4.75
5.25
V
VCC
Power Supply
VIN
Control Input Voltage
0
VCC
V
VSW
Switch Input Voltage
0
VCC
V
-40
+85
°C
100
°C/W
TA
Operating Temperature, Free Air
ΘJA
Thermal Resistance
Note:
2. Unused control inputs must be held HIGH or LOW; they may not float.
DC Electrical Characteristics
Typical values are at VCC=5.0V and TA= +25°C.
Symbol
VANALOG
VIK
VIH
VIL
IIN
IOZ
Parameter
Conditions
Analog Signal Range
Clamp Diode Voltage
High-Level Input Voltage
Low-Level Input Voltage
Control Input Leakage
Off-State Leakage Current
(3)
RON
Switch On Resistance
ICC
Quiescent Supply Current
IIN=-18mA
VIN=0V to VCC
0 ≤ A, B ≤ VCC
VIN=1.0V, ION=13mA
VIN=2.0V, ION=26mA
VIN=0V or VCC, IOUT=0
VCC (V)
4.75 to 5.25
4.75
4.75 to 5.25
4.75 to 5.25
5.25
5.25
4.75
4.75
5.25
TA= -40 to +85°C
Min. Typ. Max.
0
2
-1.2
2.0
3
5
0.8
±1.0
±1.0
7
10
3
Units
V
V
V
V
µA
µA
Ω
µA
Note:
3. Measured by the voltage drop between the A and B pins at the indicated current through the switch. On
resistance is determined by the lower of the voltages on the A or B pins.
© 2004 Fairchild Semiconductor Corporation
FSAV331 • Rev. 1.0.2
www.fairchildsemi.com
3
Typical values are at TA=+25°C and VCC=5.0V
Symbol
Parameter
Turn On Time; S to B
tON
Output Enable Time
OE to A or B
Conditions
VCC (V)
VI=7V for tPZL
VI=Open for tPZH
4.75 to 5.25
TA= -40 to +85°C
Min.
Typ.
Max.
1.0
Turn Off Time; S to B
tOFF
Output Disable Time
OE to A or B
VI=7V for tPLZ
VI=Open for tPHZ
4.75 to 5.25
VI=Open
4.75 to 5.25
5.3
1.0
5.3
1.0
5.8
1.0
Propagation Delay
Select to A Delay
ns
Figure 3,
Figure 4
ns
Figure 3,
Figure 4
5.5
(4)
tPLH, tPHL
Units Figure
0.1
ns
5.0
OIRR
Non Adjacent
Off Isolation
RL=150Ω,
f=3.58MHz
RL=150Ω,
f=3.58MHz
RL=150Ω,
f=10MHz
XTALK
Non Adjacent
(5)
Channel Crosstalk
RL=150Ω,
f=10MHz
4.75 to 5.25
-73.0
dB
Figure 6
RL=50Ω
4.75 to 5.25
300
MHz
Figure 7
(5)
DG
Differential Gain
DP
Differential Phase
BW
-3dB Bandwidth
(5)
(5)
4.75 to 5.25
0.26
%
4.75 to 5.25
0.23
°
4.75 to 5.25
-56.0
dB
Figure 5
FSAV331 — Dual-Channel, 4:1 Video Switch
AC Electrical Characteristics
Note:
4. This parameter is guaranteed by design.
5. This parameter is guaranteed by device characterization, not production tested.
Capacitance
Typical values are at TA=+25°C.
Symbol
COFF
Typ.
Units
CIN
Control Pin Input Capacitance
VCC=5.0V
2
pF
CON
A/B On Capacitance
VCC=5.0V, /OE=0V
39
pF
Off Capacitance
VCC, /OE=5.0V
A Port
B Port
Parameter
© 2004 Fairchild Semiconductor Corporation
FSAV331 • Rev. 1.0.2
Conditions
13
5
pF
www.fairchildsemi.com
4
FSAV331 — Dual Channel, 4:1 Video Switch
AC Loadings and Waveforms
Notes:
6. Input drive by 50Ω source terminated in 50Ω.
7. CL includes load and stray capacitance.
8. Input PRR=1.0MHz, tW =500ns.
Figure 3. AC Test Circuit
Figure 4. AC Waveforms
Figure 5. Off Isolation
Figure 6. Crosstalk
Figure 7. Bandwidth
© 2004 Fairchild Semiconductor Corporation
FSAV331 • Rev. 1.0.2
www.fairchildsemi.com
5
5.00±0.10
4.55
5.90
4.45 7.35
0.65
4.4±0.1
1.45
5.00
FSAV331 — Dual Channel, 4:1 Video Switch
Physical Dimensions
0.11
12°
MTC16rev4
Figure 8. 16-Lead, Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide
Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner
without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify
or obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions, specifically
the warranty therein, which covers Fairchild products.
Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings:
http://www.fairchildsemi.com/packaging/
© 2004 Fairchild Semiconductor Corporation
FSAV331 • Rev. 1.0.2
www.fairchildsemi.com
6
FSAV331 — Dual Channel, 4:1 Video Switch
© 2004 Fairchild Semiconductor Corporation
FSAV331 • Rev. 1.0.2
www.fairchildsemi.com
7