HITTITE HMC406MS8G_07

HMC406MS8G / 406MS8GE
v04.0307
AMPLIFIERS - SMT
5
GaAs InGaP HBT MMIC
POWER AMPLIFIER, 5.0 - 6.0 GHz
Typical Applications
Features
This amplifier is ideal for use as a driver
amplifier for 5.0 - 6.0 GHz applications:
Gain: 17 dB
• UNII
38% PAE
• HiperLAN & 802.11a WLAN
Supply Voltage: +5.0 V
Saturated Power: +29 dBm
Power Down Capability
Low External Part Count
Functional Diagram
General Description
The HMC406MS8G & HMC406MS8GE are high efficiency GaAs InGaP Heterojunction Bipolar Transistor
(HBT) MMIC Power amplifiers which operate between
5.0 and 6.0 GHz. The amplifier is packaged in a low
cost, surface mount 8 leaded package with an exposed
base for improved RF and thermal performance. With
a minimum of external components, the amplifier provides 17 dB of gain and +29 dBm of saturated power
at 38% PAE from a +5.0V supply voltage. Vpd can be
used for full power down or RF output power/current
control.
Electrical Specifications, TA = +25° C, Vs = 5V, Vpd = 5V
Parameter
Min.
Frequency Range
Gain
13
Gain Variation Over Temperature
Input Return Loss
Min.
16
21
0.03
0.04
21
24
34
38
Saturated Output Power (Psat)
14
Noise Figure
Max.
Units
GHz
17
21
dB
0.03
0.04
dB/ °C
11
dB
9
dB
24
27
dBm
29
dBm
34
38
dBm
27
Output Third Order Intercept (IP3)
Typ.
5.7 - 5.9
8
Output Power for 1 dB Compression (P1dB)
5 - 142
Max.
10
Output Return Loss
6.0
6.0
dB
0.002 / 300
0.002 / 300
mA
Vpd = 5V
7
7
mA
tON, tOFF
35
35
ns
Supply Current (Icq)
Vpd = 0V/5V
Control Current (Ipd)
Switching Speed
Typ.
5.0 - 6.0
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
HMC406MS8G / 406MS8GE
v04.0307
GaAs InGaP HBT MMIC
POWER AMPLIFIER, 5.0 - 6.0 GHz
20
22
15
20
18
16
5
GAIN (dB)
RESPONSE (dB)
10
0
-5
14
12
10
+25 C
+85 C
-40 C
8
-10
6
-15
S21
S11
S22
-20
4
2
-25
3
4
5
6
7
0
4.5
8
5
FREQUENCY (GHz)
5.5
6
6.5
FREQUENCY (GHz)
Input Return Loss vs. Temperature
Output Return Loss vs. Temperature
0
0
+25 C
+85 C
-40 C
RETURN LOSS (dB)
-5
RETURN LOSS (dB)
5
Gain vs. Temperature
AMPLIFIERS - SMT
Broadband Gain & Return Loss
-10
-15
+25 C
+85 C
-40 C
-20
-5
-10
-25
-30
4.5
5
5.5
6
-15
4.5
6.5
5
FREQUENCY (GHz)
34
34
32
32
30
30
28
28
26
24
22
6
6.5
26
24
+25 C
+85 C
-40 C
22
18
16
14
4.5
6.5
20
+25 C
+85 C
-40 C
18
6
Psat vs. Temperature
Psat (dBm)
P1dB (dBm)
P1dB vs. Temperature
20
5.5
FREQUENCY (GHz)
16
5
5.5
FREQUENCY (GHz)
6
6.5
14
4.5
5
5.5
FREQUENCY (GHz)
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
5 - 143
HMC406MS8G / 406MS8GE
v04.0307
GaAs InGaP HBT MMIC
POWER AMPLIFIER, 5.0 - 6.0 GHz
5
Power Compression @ 5.8 GHz
Output IP3 vs. Temperature
36
30
OIP3 (dBm)
Pout (dBm), GAIN (dB), PAE (%)
AMPLIFIERS - SMT
42
24
18
12
Pout (dBm)
Gain (dB)
PAE (%)
6
0
0
2
4
6
8
10
12
14
16
18
44
42
40
38
36
34
32
30
28
26
24
22
20
18
16
14
4.5
+25 C
+85 C
-40 C
5
Gain & Power vs. Supply Voltage
24
32
9
23
31
8
22
30
7
21
29
20
28
19
27
18
26
17
25
GAIN dB)
NOISE FIGURE (dB)
6.5
10
6
5
4
3
+25 C
+85 C
-40 C
2
16
1
15
0
4.5
14
4.75
5
5.5
6
6.5
22
5
5.25
Gain, Power & Quiescent
Supply Current vs. Vpd @ 5.8 GHz
Reverse Isolation
Power Down Isolation
-20
-30
-40
-50
33
350
30
315
27
280
24
245
21
210
Icq
18
175
15
140
12
105
Gain
P1dB
Psat
9
70
35
6
0
3
5
5.5
FREQUENCY (GHz)
6
6.5
2.5
3
3.5
4
4.5
Vpd (Vdc)
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
5
Icq (mA)
GAIN (dB), P1dB (dBm), Psat (dBm)
0
-60
4.5
23
Vcc SUPPLY VOLTAGE (Vdc)
Reverse Isolation vs. Temperature
-10
24
P1dB
Psat
Gain
FREQUENCY (GHz)
ISOLATION (dB)
6
FREQUENCY (GHz)
Noise Figure vs. Temperature
5 - 144
5.5
INPUT POWER (dBm)
HMC406MS8G / 406MS8GE
v04.0307
GaAs InGaP HBT MMIC
POWER AMPLIFIER, 5.0 - 6.0 GHz
Collector Bias Voltage (Vcc)
+5.5 Vdc
Control Voltage (Vpd)
+5.5 Vdc
RF Input Power (RFin)(Vs = Vpd = +5.0 Vdc)
+20 dBm
Junction Temperature
150 °C
Continuous Pdiss (T = 85 °C)
(derate 32 mW/°C above 85 °C)
2.1 W
Thermal Resistance
(junction to ground paddle)
31 °C/W
Storage Temperature
-65 to +150 °C
Operating Temperature
-40 to +85° C
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
Outline Drawing
AMPLIFIERS - SMT
5
Absolute Maximum Ratings
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS]
3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE.
4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE.
5. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO
PCB RF GROUND.
Package Information
Part Number
Package Body Material
Lead Finish
MSL Rating
HMC406MS8G
Low Stress Injection Molded Plastic
Sn/Pb Solder
MSL1
HMC406MS8GE
RoHS-compliant Low Stress Injection Molded Plastic
100% matte Sn
MSL1
Package Marking [3]
[1]
H406
XXXX
[2]
H406
XXXX
[1] Max peak reflow temperature of 235 °C
[2] Max peak reflow temperature of 260 °C
[3] 4-Digit lot number XXXX
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
5 - 145
HMC406MS8G / 406MS8GE
v04.0307
AMPLIFIERS - SMT
5
5 - 146
GaAs InGaP HBT MMIC
POWER AMPLIFIER, 5.0 - 6.0 GHz
Pin Descriptions
Pin Number
Function
Description
1
Vpd
Power Control Pin. For maximum power, this pin should be
connected to 5.0V. A higher voltage is not recommended.
For lower idle current, this voltage can be reduced.
2, 4, 7
GND
Ground: Backside of package has exposed metal ground
slug that must be connected to ground thru a short path.
Vias under the device are required.
3
RFIN
This pin is AC coupled and matched to 50 Ohms from 5.5
to 6.0 GHz.
5, 6
RFOUT
RF output and bias for the output stage. The power supply
for the output device needs to be supplied to these pins.
8
Vcc
Power supply voltage for the first amplifier stage. An external bypass capacitor of 330 pF is required. This capacitor
should be placed as close to the devices as possible.
Interface Schematic
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
HMC406MS8G / 406MS8GE
v04.0307
GaAs InGaP HBT MMIC
POWER AMPLIFIER, 5.0 - 6.0 GHz
5
AMPLIFIERS - SMT
Evaluation PCB
List of Materials for Evaluation PCB 104989
Item
Description
J1 - J2
PCB Mount SMA RF Connector
J3
2mm DC Header
C1 - C3
330 pF Capacitor, 0603 Pkg.
C4
2.2 μF Capacitor, Tantalum
C5
0.6 pF Capacitor, 0603 Pkg.
C6
1.6 pF Capacitor, 0603 Pkg.
C7
100 pF Capacitor, 0603 Pkg.
L1
3.9 nH Inductor, 0603 Pkg.
U1
HMC406MS8G / HMC406MS8GE
Amplifier
PCB [2]
105021 Eval Board
[1]
The circuit board used in the final application should
use RF circuit design techniques. Signal lines
should have 50 ohm impedance while the package
ground leads and exposed paddle should be connected directly to the ground plane similar to that
shown. A sufficient number of via holes should be
used to connect the top and bottom ground planes.
The evaluation board should be mounted to an
appropriate heat sink. The evaluation circuit board
shown is available from Hittite upon request.
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Roger 4350
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
5 - 147
HMC406MS8G / 406MS8GE
v04.0307
Application Circuit
AMPLIFIERS - SMT
5
GaAs InGaP HBT MMIC
POWER AMPLIFIER, 5.0 - 6.0 GHz
Note 1: C3 should be located < 0.020” from Pin 8 (Vcc)
Note 2: C2 should be located < 0.020” from L1.
5 - 148
TL1
TL2
TL3
Impedance
50 Ohm
50 Ohm
50 Ohm
Length
0.038”
0.231”
0.1”
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
HMC406MS8G / 406MS8GE
v04.0307
GaAs InGaP HBT MMIC
POWER AMPLIFIER, 5.0 - 6.0 GHz
5
AMPLIFIERS - SMT
Notes:
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
5 - 149