MC022
Mii
MICROCOUPLER, SMALL TRANSISTOR OUTPUT
OPTOELECTRONIC
PRODUCTS{PRIVATE }
DIVISION
Rev A 8/2/02
Features:
•
•
•
•
Applications:
Small phototransistor output
Small size saves real estate
Large thick film gold bond pads
Element evaluation on request
Eliminate ground loops
Level shifting
Line receiver
Solid state switching
Switching power supplies
•
•
•
•
•
DESCRIPTION
The MC022 microcoupler is a single channel optocoupler consisting of an LED optically coupled to a light sensitive
silicon phototransistor. Each microcoupler is provided with full 100% DC testing (+125°C test option upon request) or
100% element evaluation. All microcouplers are capable of operating over the full military temperature range.
Package Dimensions
Schematic Diagram
0.060
C
B
E
K
A
A
C
K
B
E
0.085
0.105
ALL TOLERANCES +/- .005
DIMENSIONS ARE IN INCHES
_____________________________________________________________________________________________
_
TYPICAL PERFORMANCE CURVES
(TYPICAL, Ta = 25 ° C)
80
70
Ic (mA)
60
0 mA
IF = 1
50
40
IF = 5 m A
30
20
IF = 2 m A
10
0
5
10
15
20
25
Vce (V)
MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION • 725 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 487-6918
www.micropac.com
E-MAIL: [email protected]
4-4
MC022
MICROCOUPLER, SMALL TRANSISTOR OUTPUT
Rev A 8/2/02
ELECTRICAL CHARACTERISTICS
TA = 25°C unless otherwise specified.
PARAMETER
Input Diode Reverse Current
SYMBOL
MIN
TYP
IR
MAX
UNITS
TEST CONDITIONS
100
µA
VR = 2V
Ω
VIN-OUT = 1kV
11
Input-to-Output Internal Resistance
RIO
10
Input-to-Output Capacitance
CIO
2.5
5
pF
VCC = 5.5V, IF = 20mA
Input Forward Voltage
VF
1.5
1.75
V
IF = 20mA
0.3
V
IF = 20mA, IC = 10µA, IB = 0
Collector-Emitter Saturation Voltage
VCE(SAT)
Collector-Base Breakdown Voltage
VBRCBO
50
V
IC = 100µA, IB = 0, IF = 0
Collector-Emitter Breakdown Voltage
VBRCEO
50
V
IC = 1mA, IB = 0, IF = 0
Emitter-Base Breakdown Voltage
VBREBO
7
V
IC = 0, IE =10 0µA, IF = 0
On State Collector Current
IC(ON)
10
mA
IF = 10mA, VCE = 5V, IB = 0
Off-State Collector Current
ID
100
nA
IF = 0mA, VCE = 30V, IB = 0
Rise Time (Phototransistor Mode)
tr
10
25
µs
IF = 5mA, VCE = 10V, RL = 100Ω
Fall Time (Phototransistor Mode)
tf
10
25
µs
IF = 5mA, VCE = 10V, RL = 100Ω
25
NOTE
NOTE 1: These parameters are measured between all phototransistor leads shorted together and both input diode leads shorted together.
RECOMMENDED OPERATING CONDITIONS:
PARAMETER
Input Current
Supply Voltage
Operating Temperature
SYMBOL
MIN
MAX
UNITS
IF
1
50
mA
VCE
5
30
V
TA
-55
125
°C
MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION • 725 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 487-6918
www.micropac.com
E-MAIL: [email protected]
4-5
1