Series CMX 5-10 Amp • 0-60, 0-100 Vdc • DC Output SIP • MOSFET Output • Extra Low On-State Resistance DC output SPST-NO solid state relays use MOSFET output for high switching capabilities in a PC-mount air-cooled package. Pinouts are compatible with Series 6 and ODC type I/O modules. Manufactured in Crydom’s ISO 9002 Certified facility for optimum product performance and reliability. MODEL NO. CURRENT DERATING CURVES INPUT SPECIFICATIONS ➀ 7.0 6.0 LOAD CURRENT [AMPS] CMX60D5➂ CMX60D10➂ CMX100D6➂ 3.0-10.0 Vdc Control Voltage Range CMX100D6 5.0 4.0 CMX60D5 3.0 2.0 1.0 Nominal Input Impedance 300 Ohm Typical Input Current @ 5 Vdc 15 mAdc Must Turn On Voltage 3.0 Vdc Must Turn Off Voltage 1.0 Vdc 0 20 40 60 80 OUTPUT SPECIFICATIONS ➀ LOAD CURRENT [AMPS] AMBIENT TEMPERATURE [ºC] 12.0 Operating Voltage Range 0-60 Vdc 0-60 Vdc 0-100 Vdc 10.0 Load Current Range 0-5 Adc 0-10 Adc 0-6 Adc Max. Surge Current, (10 msec) 60 Apk 100 Apk 100 Apk 8.0 CMX60D10 6.0 4.0 2.0 0 20 40 60 Max.Off-State Leakage @ Rated Voltage 100 µAdc Max. On-State Resistance @ Rated Current (RDS-ON) .10 Ohm .018 Ohm .040 Ohm 0.18V 0.24V Max. On-State Voltage Drop @ Rated Current 80 AMBIENT TEMPERATURE [ºC] Max. Load Current vs. Temp. Max.Turn-On Time 1.0 msec Max. Turn-Off TIme 300 µsec GENERAL SPECIFICATIONS .300 (7.6) Dielectric Strength ➁ Insulation Resistance (Min.) @ 500 Vdc 1.00 MAX. (25.4) ➁ Max. Capacitance (Input/Output) CONTROL .300 TYP. (7.6) 4 .200 (5.1) 3 .700 (17.8) 1.70 (43.1) LOAD 2 Ambient Operating Temperature Range 1 1.100 (27.9) .050 TYP. (1.3) Ambient Storage Temperature Range .100 (2.5) .040 (1.0) DIA. (4 PLACES) PIN PIN PIN PIN 1: 2: 3: 4: +DC LOAD --DC LOAD +DC CONTROL --DC CONTROL All dimensions are in inches (millimeters) APPROVALS UL E116950 (6A & 10A Models) FastFax Document No. 109 SERIES CMX032698, PAGE 1 OF 1 0.5V 2500 Vrms 109 Ohm 15 pF -30 to 80ºC -30 to 125ºC MECHANICAL SPECIFICATIONS 0.4 oz. (11 g) Weight: (typical) Thermally Conductive Epoxy Encapsulation: GENERAL NOTES ➀ ➁ ➂ ©1998 CRYDOM CORP, Specifications subject to change without notice. All parameters at 25ºC unless otherwise specified. Dielectric and insulation resistance are measured between input and output. Inductive loads should be diode suppressed. For recommended applications and more information contact: USA: (800) 8 CRYDOM • (800) 827-9366 • (619) 715-7200 • fax (619) 715-7280 Crydom Corp, 9525 Chesapeake Drive, San Diego, CA 92123 • e-mail: [email protected] WEB SITE: http://www.crydom.com FASTFAX Product Information: (888) 267-9191 UK: (44)1202 812300 • fax (44)1202 812340 Crydom International Ltd., 85, Condor Close, Woolsbridge Industrial Estate, Three-Legged Cross. Wimborne, Dorset, England BH21 6SU GERMANY: (49) (0)6874 182580 • fax (49)(0)6874 182585 Crydom GmbH, Gewerbegebiet Im Schachen, D-66687 Nunkirchen, Germany • e-mail: [email protected]