DSS 2x101-02A Power Schottky Rectifier IFAV = 2x100 A VRRM = 200 V VF = 0.84 V VRSM VRRM V V miniBLOC, SOT-227 B 200 200 Type DSS 2x101-02A Symbol Conditions Maximum Ratings IFRMS IFAVM IFAVM TC = 105°C; rectangular, d = 0.5 TC = 105°C; rectangular, d = 0.5; per device IFSM TVJ = 45°C; tp = 10 ms (50 Hz), sine EAS IAS = 4 A; L = 100 µH; TVJ = 25°C; non repetitive 0.8 mJ IAR VA = 1.5·VRRM typ.; f = 10 kHz; repetitive 0.4 A 18 kV/µs (dv/dt)cr TVJ TVJM Tstg Ptot TC = 25°C VISOL 50/60 Hz, RMS IISOL < 1 mA Md mounting torque (M4) terminal connection torque (M4) Weight typical Symbol Conditions IR VR = VRRM; TVJ = 25°C TVJ = 125°C VF IF = 100 A; IF = 100 A; IF = 200 A; RthJC RthCH per diode per diode 150 100 200 A A A 1400 A -40...+150 150 -40...+150 °C °C °C 310 W 2500 V~ 1.1-1.5/9-13 1.1-1.5/9-13 30 Nm/lb.in. Nm/lb.in. g Characteristic Values typ. max. 4 10 TVJ = 125°C TVJ = 25°C TVJ = 125°C 0.1 mA mA 0.84 0.94 1.11 V V V 0.4 K/W K/W Features • International standard package miniBLOC • Isolation voltage 2500 V~ • UL registered E 72873 • 2 independent Schottky diodes in 1 package • Very low VF • Extremely low switching losses • Low IRM-values Applications • Rectifiers in switch mode power supplies (SMPS) • Free wheeling diode in low voltage converters Advantages • High reliability circuit operation • Low voltage peaks for reduced protection circuits • Low noise switching • Low losses Dimensions see Outlines.pdf IXYS reserves the right to change limits, Conditions and dimensions. © 2005 IXYS All rights reserved 0540 Pulse test: Pulse Width = 5 ms, Duty Cycle < 2.0% Data according to IEC 60747 and per diode unless otherwise specified. 1-2 DSS 2x101-02A 1000 10000 10 mA TVJ=150°C A IR pF 1 125°C CT 100°C 1000 100 IF 0.1 10 TVJ= 25°C 75°C TVJ = 150°C 125°C 25°C 0.01 50°C 25°C 1 0.2 100 0.001 0.4 0.6 0.8 1.0 V 0 50 100 VF Fig. 1 Max. forward voltage drop characteristics Fig. 2 Typ. reverse current IR vs. reverse voltage VR 160 W A 140 IF(AV) DC d = 0.5 100 150 VR V A IFSM d= DC 0.5 0.33 0.25 0.17 0.08 80 60 40 40 50 Fig. 3 Typ. junction capacitance CT versus reverse voltage VR 120 P(AV) 100 120 80 0 V 150 VR 20 0 0 0 40 80 120 0 C 50 TC Fig. 4 Average forward current IF(AV) versus case temperature TC A 100 IF(AV) s tP Fig. 5 Forward power loss characteristics 1 K/W D= 0.5 ZthJC 0.1 0.33 0.25 0.17 Single Pulse 0.08 0.01 0.0001 DSS 2x101-02A 0.001 0.01 s 0.1 1 Note: All curves are per diode t IXYS reserves the right to change limits, Conditions and dimensions. © 2005 IXYS All rights reserved 0540 Fig. 6 Transient thermal impedance junction to case at various duty cycles 2-2