3.5x2.8 mm SMD CHIP LED LAMP PRELIMINARY SPEC Part Number: AA3528RWC/A ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES WHITE Description The source color devices are made with InGaN on SiC Light Emitting Diode. Static electricity and surge damage the LEDS. It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs. Features All devices, equipment and machinery must be electrically SINGLE COLOR. grounded. SUITABLE FOR ALL SMT ASSEMBLY AND SOLDER PROCESS. AVAILABLE ON TAPE AND REEL. Applications IDEAL FOR BACKLIGHTING. PACKAGE : 1500PCS / REEL. traffic signaling. MOISTURE SENSITIVITY LEVEL : LEVEL 4. backlighting (illuminated advertising , general lighting). ELECTROSTATIC DISCHARGE THRESHOLD (HBM):1000V. interior and exterior automotive lighting. TYP. COLOR TEMPERATURE:6500K substitution of micro incandescent lamps. COLOR COORDINATES:X=0.33,Y=0.34 ACC. TO reading lamps. CIE1931(WHITE). signal and symbol luminaire for orientation. OPTICAL EFFICIENCY:12 lm/W(TYP.) marker lights (e.g. steps, exit ways, etc). COLOR REPRODUCTION INDEX:80 decorative and entertainment lighting. RoHS COMPLIANT. indoor and outdoor commercial and residential architectural lighting. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Specifications are subject to change without notice. SPEC NO: DSAG3655 REV NO: V.4 DATE: MAY/23/2006 PAGE: 1 OF 7 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: H.Q.YUAN ERP: 1201001644 Selection Guide Note2 Part No. Dice AA3528RWC/A Lens Type WHITE (InGaN) Note3 luminous Intensity Iv(mcd) @ 20 mA v (mlm) @ 20 mA Viewing Note1 Angle Min. Typ. Typ. 2θ θ1/2 70 150 800 120° WATER CLEAR Absolute Maximum Ratings at TA=25°C Parameter Symbol Value Unit Power dissipation Pt 114 mW Reverse Voltage VR 5 V Junction temperature TJ 110 °C Operating Temperature Top -40 To +85 °C Storage Temperature Tstg -40 To +100 °C IF 30 mA IFM 100 mA Rth JA Rth JS 250 110 °C/W °C/W DC Forward Current Peak Forward Current Note4 Thermal resistance Note5 Junction/ambient Junction/solder point Notes: 1.θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2.Luminous intensity is measured by a current pulse of 10ms at a tolerance of ±15%. 3.The typical data of Luminous Flux can only reflect statistical figures, actual parameters of individual product could differ from the typical data. For the purpose of product enhancement, the typical data is subject to change without prior notice. 4.1/10 Duty Cycle, 0.1ms Pulse Width. 5.Rth(J-A) Results from mounting on PC board FR4 (pad size≥16 mm 2 per pad), Electrical / Optical Characteristics at TA=25°C Parameter Symbol Chromaticity coordinate x acc.to CIE1931 IF=20mA [Typ.] X Chromaticity coordinate y acc.to CIE1931 IF=20mA [Typ.] Y Value Unit Note1 0.33 - Note1 0.34 - Forward Voltage IF=20mA [Min.] Forward Voltage IF=20mA [Typ.] Forward Voltage 2.7 VF Note2 IF=20mA [Max.] Reverse Current (VR=5V) 3.3 3.8 [Typ.] 0.01 IR Reverse Current (VR=5V) V [Max.] 10 µA Temperature coefficient of x [Typ.] IF=20mA, -10°C T 100°C TC x -0.1 10-3 / °C Temperature coefficient of y [Typ.] IF=20mA, -10°C T 100°C TCy -0.2 10-3 / °C Temperature coefficient of VF IF=20mA, -10°C T 100°C [Typ.] TCV -2.5 mV/ °C Notes: 1.Chromaticity coordinates are measured by a current pulse of 20ms with a tolerance of ±0.01 in X and Y color coordinates. 2.Forward voltage is measured with a current pulse of 10ms at a tolerance of ±0.1V. SPEC NO: DSAG3655 REV NO: V.4 DATE: MAY/23/2006 PAGE: 2 OF 7 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: H.Q.YUAN ERP: 1201001644 Brightness codes Note1 luminous Intensity Iv(mcd) @ 20 mA v (mlm) @ 20 mA Code. Min. Max. Typ. M 70 130 480 N 110 220 710 P 180 320 960 Q 280 420 1270 R 380 550 1720 Note2 Notes: 1.Luminous intensity is measured by a current pulse of 10ms at a tolerance of ±15%. 2.The typical data of Luminous Flux can only reflect statistical figures, actual parameters of individual product could differ from the typical data. For the purpose of product enhancement, the typical data is subject to change without prior notice. White AA3528RWC/A SPEC NO: DSAG3655 REV NO: V.4 DATE: MAY/23/2006 PAGE: 3 OF 7 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: H.Q.YUAN ERP: 1201001644 AA3528RWC/A SPEC NO: DSAG3655 REV NO: V.4 DATE: MAY/23/2006 PAGE: 4 OF 7 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: H.Q.YUAN ERP: 1201001644 Color Codes SPEC NO: DSAG3655 REV NO: V.4 DATE: MAY/23/2006 PAGE: 5 OF 7 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: H.Q.YUAN ERP: 1201001644 AA3528RWC/A Recommended Soldering Pattern (Units : mm ; Tolerance: ± 0.1) Tape Specifications (Units : mm) Reel Dimension SPEC NO: DSAG3655 REV NO: V.4 DATE: MAY/23/2006 PAGE: 6 OF 7 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: H.Q.YUAN ERP: 1201001644 PACKING & LABEL SPECIFICATIONS AA3528RWC/A SPEC NO: DSAG3655 REV NO: V.4 DATE: MAY/23/2006 PAGE: 7 OF 7 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: H.Q.YUAN ERP: 1201001644