2.0x1.25mm SMD CHIP LED LAMP Part Number: APTK2012RWC/A-F01 PRELIMINARY SPEC ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES White Description The source color devices are made with InGaN on SiC Light Emitting Diode. Static electricity and surge damage the LEDS. Features It is recommended to use a wrist band or anti-electrostatic z 2.0mmx1.25mm SMT LED, 0.75mm thickness. glove when handling the LEDs. z Low power consumption. All devices, equipment and machinery must be electrically z Wide viewing angle. grounded. z Ideal for back light and indicator. z Various colors and lens types available. Applications z Package : 2000pcs / reel. z traffic signaling. z Moisture sensitivity level : level 4. z backlighting (illuminated advertising , general lighting). z Electrostatic discharge threshold (HBM):1000V. z interior and exterior automotive lighting. z Typ. color temperature:6500K z substitution of micro incandescent lamps. z Color coordinates:x=0.31,y=0.31 acc. to CIE1931(white). z Reading camps. z Optical efficiency:10.94 lm/W(typ.) z signal and symbol luminaire for orientation. z Color reproduction index:80 z marker lights (e.g. steps, exit ways, etc). z RoHS compliant. z decorative and entertainment lighting. z indoor and outdoor commercial and residential architectural lighting. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.1(0.004") unless otherwise noted. 3. Specifications are subject to change without notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAH3789 REV NO: V.3 DATE: AUG/16/2008 PAGE: 1 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: S.P.Chen ERP: 1204001105 Selection Guide Note2 Dice Part No. APTK2012RWC/A-F01 luminous Intensity Iv(mcd) @ 20 mA Lens Type WHITE (InGaN) Note3 Φv (mlm) @ 20 mA Viewing Note1 Angle Min. Typ. Typ. 2 θ 1/2 70 200 700 100 ° WATER CLEAR Absolute Maximum Ratings at TA=25°C Parameter Symbol Value Unit Power dissipation Pt 120 mW Reverse Voltage VR 5 V Junction temperature TJ 110 °C Operating Temperature Top -40 To +85 °C Storage Temperature Tstg -40 To +100 °C IF 30 mA IFM 100 mA Rth JA Rth JS 350 130 °C/W °C/W DC Forward Current Peak Forward Current Note4 Thermal resistance Note5 Junction/ambient Junction/solder point Notes: 1 .θ 1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2.Luminous intensity is measured by a current pulse of 10ms at a tolerance of ±15%. 3.The typical data of Luminous Flux can only reflect statistical figures, actual parameters of individual product could differ from the typical data. For the purpose of product enhancement, the typical data is subject to change without prior notice. 4.1/10 Duty Cycle, 0.1ms Pulse Width. 5.Rth(J-A) Results from mounting on PC board FR4 (pad size ≥ 16 mm 2 per pad), Electrical / Optical Characteristics at TA=25°C Parameter Symbol Chromaticity coordinate x acc.to CIE1931 IF=20mA [Typ.] X Chromaticity coordinate y acc.to CIE1931 IF=20mA [Typ.] Y Note1 Note1 Forward Voltage IF=20mA [Min.] Forward Voltage IF=20mA [Typ.] Forward Voltage Unit 0.31 - 0.31 - 2.7 VF Note2 IF=20mA [Max.] Reverse Current (VR=5V) Value 3.2 4.0 [Typ.] 0.01 IR Reverse Current (VR=5V) V [Max.] μA 10 Temperature coefficient of x IF=20mA, -10 ° C≤ T≤100 ° C [Typ.] TC x -0.1 10-3 / ° C Temperature coefficient of y IF=20mA, -10 ° C≤ T≤100 ° C [Typ.] TCy -0.2 10-3 / ° C Temperature coefficient of VF IF=20mA, -10 ° C≤ T≤100 ° C [Typ.] TCV -2.5 mV/ ° C Notes: 1.Chromaticity coordinates are measured by a current pulse of 20ms with a tolerance of ±0.01 in X and Y color coordinates. 2.Forward voltage is measured with a current pulse of 10ms at a tolerance of ±0.1V. SPEC NO: DSAH3789 REV NO: V.3 DATE: AUG/16/2008 PAGE: 2 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: S.P.Chen ERP: 1204001105 Brightness codes Note1 Note2 luminous Intensity Iv(mcd) @ 20 mA Φv(mlm) @ 20 mA Code. Min. Max. Typ. M 70 130 300 N 110 220 480 P 180 320 710 Q 280 420 960 Notes: 1.Luminous intensity is measured by a current pulse of 10ms at a tolerance of ±15%. 2.The typical data of Luminous Flux can only reflect statistical figures, actual parameters of individual product could differ from the typical data. For the purpose of product enhancement, the typical data is subject to change without prior notice. White APTK2012RWC/A-F01 SPEC NO: DSAH3789 REV NO: V.3 DATE: AUG/16/2008 PAGE: 3 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: S.P.Chen ERP: 1204001105 APTK2012RWC/A-F01 SPEC NO: DSAH3789 REV NO: V.3 DATE: AUG/16/2008 PAGE: 4 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: S.P.Chen ERP: 1204001105 APTK2012RWC/A-F01 White CIE 0.40 c0 0.35 y b1 0.30 b2 a0 0.25 a2 0.20 0.20 0.25 0.30 0.35 0.40 x Rank a2 Rank a0 X 0.263 0.282 0.265 0.242 X 0.282 0.298 0.286 0.265 Y 0.213 0.245 0.265 0.226 Y 0.245 0.271 0.299 0.265 Rank b2 Rank b1 X 0.298 0.313 0.306 0.286 X 0.313 0.329 0.329 0.306 Y 0.271 0.296 0.332 0.299 Y 0.296 0.325 0.371 0.332 Rank c0 X 0.329 0.358 0.363 0.329 Y 0.325 0.372 0.400 0.371 SPEC NO: DSAH3789 REV NO: V.3 DATE: AUG/16/2008 PAGE: 5 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: S.P.Chen ERP: 1204001105 APTK2012RWC/A-F01 Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Tape Specifications (Units : mm) Reel Dimension SPEC NO: DSAH3789 REV NO: V.3 DATE: AUG/16/2008 PAGE: 6 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: S.P.Chen ERP: 1204001105 PACKING & LABEL SPECIFICATIONS APTK2012RWC/A-F01 SPEC NO: DSAH3789 REV NO: V.3 DATE: AUG/16/2008 PAGE: 7 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: S.P.Chen ERP: 1204001105