3.5x2.8 mm SMD CHIP LED LAMP PRELIMINARY SPEC Part Number: AA3528RWS/Z ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES WHITE Description The source color devices are made with InGaN Light Emitting Diode. Static electricity and surge damage the LEDS. It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs. All devices, equipment and machinery must be electrically Features z SINGLE grounded. COLOR. z SUITABLE FOR ALL SMT ASSEMBLY AND SOLDER PROCESS. z AVAILABLE z IDEAL FOR BACKLIGHTING. z PACKAGE z traffic signaling. : 1500PCS / REEL. z MOISTURE z backlighting (illuminated advertising , general lighting). SENSITIVITY LEVEL : LEVEL 5. z ELECTROSTATIC z TYP. Applications ON TAPE AND REEL. DISCHARGE THRESHOLD (HBM):1000V. COLOR TEMPERATURE:6500K. z COLOR COORDINATES:X=0.31,Y=0.31 ACC. TO CIE1931(WHITE). z OPTICAL z COLOR zRoHS z interior and exterior automotive lighting. z substitution of micro incandescent lamps. z Reading camps. z signal and symbol luminaire for orientation. z marker lights (e.g. steps, exit ways, etc). EFFICIENCY: 40.6 lm/W(TYP.) REPRODUCTION INDEX:80 COMPLIANT. z decorative and entertainment lighting. z indoor and outdoor commercial and residential architectural lighting. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Specifications are subject to change without notice. 4.The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAH4502 REV NO: V.1 DATE: MAY/21/2007 PAGE: 1 OF 8 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: S.J.LIU ERP: 1201002659 Handling Precautions Compare to epoxy encapsulant that is hard and brittle, silicone is softer and flexible. Although its characteristic significantly reduces thermal stress, it is more susceptible to damage by external mechanical force. As a result, special handling precautions need to be observed during assembly using silicone encapsulated LED products. Failure to comply might leads to damage and premature failure of the LED. 1. Handle the component along the side surfaces by using forceps or appropriate tools. 2. Do not directly touch or handle the silicone lens surface. It may damage the internal circuitry. 3. Do not stack together assembled PCBs containing exposed LEDs. Outside impact may scratch the silicone lens or damage the internal circuitry. 4. During surface-mounting, the pickup capillary diameter should be larger than the silicone lens to insure the capillary does not scratch or damage the lens. SPEC NO: DSAH4502 REV NO: V.1 DATE: MAY/21/2007 PAGE: 2 OF 8 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: S.J.LIU ERP: 1201002659 Selection Guide Note2 Dice Part No. AA3528RWS/Z WHITE (InGaN) luminous Intensity Iv(mcd) @ 20 mA Lens Type WATER CLEAR Note3 Viewing Note1 Angle Φv (mlm) @ 20 mA Min. Typ. Min. Typ. 2θ1/2 480 1000 900 2600 120° Absolute Maximum Ratings at TA=25°C Parameter Symbol Value Unit Power dissipation Pt 111 mW Reverse Voltage VR 5 V Junction temperature TJ 110 °C Operating Temperature Top -40 To +85 °C Storage Temperature Tstg -40 To +100 °C IF 30 mA IFM 100 mA Rth JA Rth JS 250 110 °C/W °C/W DC Forward Current Peak Forward Current Note4 Thermal resistance Note5 Junction/ambient Junction/solder point Notes: 1.θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2.Luminous intensity is measured by a current pulse of 10ms at a tolerance of ±15%. 3.The typical data of Luminous Flux can only reflect statistical figures, actual parameters of individual product could differ from the typical data. For the purpose of product enhancement, the typical data is subject to change without prior notice. 4.1/10 Duty Cycle, 0.1ms Pulse Width. 5.Rth(J-A) Results from mounting on PC board FR4 (pad size≥16 mm 2 per pad), Electrical / Optical Characteristics at TA=25°C Parameter Symbol Chromaticity coordinate x acc.to CIE1931 IF=20mA [Typ.] X Chromaticity coordinate y acc.to CIE1931 IF=20mA [Typ.] Y Note1 Note1 Forward Voltage IF=20mA [Min.] Forward Voltage IF=20mA [Typ.] Forward Voltage Unit 0.31 - 0.31 - 2.7 VF Note2 IF=20mA [Max.] Reverse Current (VR=5V) Value 3.2 3.7 [Typ.] 0.01 IR Reverse Current (VR=5V) V [Max.] μA 10 Temperature coefficient of x IF=20mA, -10°C≤ T≤100°C [Typ.] TC x -0.1 10-3 / °C Temperature coefficient of y IF=20mA, -10°C≤ T≤100°C [Typ.] TCy -0.2 10-3 / °C Temperature coefficient of VF IF=20mA, -10°C≤ T≤100°C [Typ.] TCV -2.5 mV/ °C Notes: 1.Chromaticity coordinates are measured by a current pulse of 20ms with a tolerance of ±0.01 in X and Y color coordinates. 2.Forward voltage is measured with a current pulse of 10ms at a tolerance of ±0.1V. SPEC NO: DSAH4502 REV NO: V.1 DATE: MAY/21/2007 PAGE: 3 OF 8 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: S.J.LIU ERP: 1201002659 Brightness codes Note1 luminous Intensity Iv(mcd) @ 20 mA Φv (mlm) @ 20 mA Code. Min. Max. Typ. S 480 750 2450 T 650 1200 2600 U 900 1500 2710 V 1200 1800 2800 Note2 Notes: 1.Luminous intensity is measured by a current pulse of 10ms at a tolerance of ±15%. 2.The typical data of Luminous Flux can only reflect statistical figures, actual parameters of individual product could differ from the typical data. For the purpose of product enhancement, the typical data is subject to change without prior notice. White AA3528RWS/Z SPEC NO: DSAH4502 REV NO: V.1 DATE: MAY/21/2007 PAGE: 4 OF 8 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: S.J.LIU ERP: 1201002659 AA3528RWS/Z SPEC NO: DSAH4502 REV NO: V.1 DATE: MAY/21/2007 PAGE: 5 OF 8 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: S.J.LIU ERP: 1201002659 AA3528RWS/Z White CIE 0.44 0.42 0.40 c1 0.38 0.36 b4 c0 0.34 b3 b1 0.32 b2 0.30 a1 0.28 a0 0.26 0.24 0.22 0.22 0.24 0.26 0.28 0.30 0.32 0.34 0.36 0.38 0.40 0.42 0.44 a0 a1 X 0.264 0.283 0.296 0.280 X 0.248 0.275 0.283 0.264 Y 0.267 0.305 0.276 0.248 Y 0.286 0.321 0.305 0.267 Reference CCT: 14000~9000k Reference CCT: 14000~9000k b1 b2 X 0.283 0.330 0.330 0.287 X 0.287 0.330 0.330 0.296 Y 0.305 0.360 0.339 0.295 Y 0.295 0.339 0.318 0.276 Reference CCT: 9000~5600k Reference CCT: 9000~5600k b3 b4 X 0.275 0.298 0.306 0.283 X 0.298 0.321 0.330 0.306 Y 0.321 0.350 0.332 0.305 Y 0.350 0.379 0.360 0.332 Reference CCT: 9000~7000k Reference CCT: 7600~5600k c0 c1 X 0.330 0.361 0.356 0.330 X 0.321 0.366 0.361 0.330 Y 0.360 0.385 0.351 0.318 Y 0.379 0.419 0.385 0.360 Reference CCT: 5600~4600k Reference CCT: 6000~4600k SPEC NO: DSAH4502 REV NO: V.1 DATE: MAY/21/2007 PAGE: 6 OF 8 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: S.J.LIU ERP: 1201002659 AA3528RWS/Z Recommended Soldering Pattern (Units : mm ; Tolerance: ± 0.1) Tape Specifications (Units : mm) Reel Dimension SPEC NO: DSAH4502 REV NO: V.1 DATE: MAY/21/2007 PAGE: 7 OF 8 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: S.J.LIU ERP: 1201002659 PACKING & LABEL SPECIFICATIONS AA3528RWS/Z SPEC NO: DSAH4502 REV NO: V.1 DATE: MAY/21/2007 PAGE: 8 OF 8 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: S.J.LIU ERP: 1201002659