2.8X1.0mm RIGHT ANGLE SMD CHIP LED LAMP Part Number: AA2810RWS/Z PRELIMINARY SPEC WHITE ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Description The source color devices are made with InGaN Light Emitting Diode. Static electricity and surge damage the LEDS. Features It is recommended to use a wrist band or anti-electrostatic z2.8mmX1.0mm right angle SMT LED, 1.2mm thickness. zLow power consumption. glove when handling the LEDs. All devices, equipment and machinery must be electrically zIdeal for backlight and indicator. grounded. zVarious colors and lens types available. zPackage : 2000pcs / reel. Applications zElectrostatic discharge threshold (HBM):1000V. z Typ. color temperature:6500K z Color z backlighting (illuminated advertising , general lighting). coordinates:x=0.31,y=0.31 acc. to cie1931(white). z Optical z Color z traffic signaling. z interior and exterior automotive lighting. z substitution of micro incandescent lamps. efficiency:53.1 lm/ W(typ.) z Reading camps. reproduction index:80 z signal and symbol luminaire for orientation. zMoisture sensitivity level : level 4. z marker lights (e.g. steps, exit ways, etc). zRoHS compliant. z decorative and entertainment lighting. z indoor and outdoor commercial and residential architectural lighting. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.1(0.0039") unless otherwise noted. 3. Specifications are subject to change without notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAH4500 REV NO: V.3 DATE: AUG/15/2008 PAGE: 1 OF 8 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: R.CHEN ERP: 1201002975 Handling Precautions Compare to epoxy encapsulant that is hard and brittle, silicone is softer and flexible. Although its characteristic significantly reduces thermal stress, it is more susceptible to damage by external mechanical force. As a result, special handling precautions need to be observed during assembly using silicone encapsulated LED products. Failure to comply might leads to damage and premature failure of the LED. Do not directly touch or handle the silicone lens surface. It may damage the internal circuitry. SPEC NO: DSAH4500 REV NO: V.3 DATE: AUG/15/2008 PAGE: 2 OF 8 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: R.CHEN ERP: 1201002975 Selection Guide Note2 Dice Part No. AA2810RWS/Z Lens Type WHITE (InGaN) luminous Intensity Iv(mcd) @ 20mA WATER CLEAR Note3 Viewing Note1 Angle Φv (mlm) @ 20mA Min. Typ. Min. Typ. 2θ1/2 650 1200 1500 3400 120° Absolute Maximum Ratings at TA=25°C Parameter Symbol Value Unit Power dissipation Pt 111 mW Reverse Voltage VR 5 V Junction temperature TJ 110 °C Operating Temperature Top -40 To +85 °C Storage Temperature Tstg -40 To +100 °C IF 30 mA IFM 100 mA Rth JA Rth JS 300 140 °C/W °C/W DC Forward Current Peak Forward Current Note4 Thermal resistance Note5 Junction/ambient Junction/solder point Notes: 1.θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2.Luminous intensity is measured by a current pulse of 10ms at a tolerance of ±15%. 3.The typical data of Luminous Flux can only reflect statistical figures, actual parameters of individual product could differ from the typical data. For the purpose of product enhancement, the typical data is subject to change without prior notice. 4.1/10 Duty Cycle, 0.1ms Pulse Width. 5.Rth(J-A) Results from mounting on PC board FR4 (pad size≥16 mm 2 per pad), Electrical / Optical Characteristics at TA=25°C Parameter Symbol Chromaticity coordinate x acc.to CIE1931 IF=20mA [Typ.] X Chromaticity coordinate y acc.to CIE1931 IF=20mA [Typ.] Y Note1 Note1 Forward Voltage IF=20mA [Min.] Forward Voltage IF=20mA [Typ.] Forward Voltage [Typ.] Reverse Current (VR=5V) [Max.] Unit 0.31 - 0.31 - 2.7 VF Note2 IF=20mA [Max.] Reverse Current (VR=5V) Value 3.2 V 3.7 0.01 IR μA 10 Temperature coefficient of x IF=20mA, -10°C≤ T≤100°C [Typ.] TC x -0.1 10-3 / °C Temperature coefficient of y IF=20mA, -10°C≤ T≤100°C [Typ.] TCy -0.2 10-3 / °C Temperature coefficient of VF IF=20mA, -10°C≤ T≤100°C [Typ.] TCV -2.5 mV/ °C Notes: 1.Chromaticity coordinates are measured by a current pulse of 20ms with a tolerance of ±0.01 in X and Y color coordinates. 2.Forward voltage is measured with a current pulse of 10ms at a tolerance of ±0.1V. SPEC NO: DSAH4500 REV NO: V.3 DATE: AUG/15/2008 PAGE: 3 OF 8 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: R.CHEN ERP: 1201002975 Brightness codes Note1 luminous Intensity Iv(mcd) @ 20 mA Φv (mlm) @ 20 mA Code. Min. Max. Typ. T 650 1100 3300 U 900 1500 3450 V 1200 1800 3600 Note2 Notes: 1.Luminous intensity is measured by a current pulse of 10ms at a tolerance of ±15%. 2.The typical data of Luminous Flux can only reflect statistical figures, actual parameters of individual product could differ from the typical data. For the purpose of product enhancement, the typical data is subject to change without prior notice. White AA2810RWS/Z SPEC NO: DSAH4500 REV NO: V.3 DATE: AUG/15/2008 PAGE: 4 OF 8 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: R.CHEN ERP: 1201002975 AA2810RWS/Z SPEC NO: DSAH4500 REV NO: V.3 DATE: AUG/15/2008 PAGE: 5 OF 8 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: R.CHEN ERP: 1201002975 AA2810RWS/Z White CIE 0.40 c0 0.35 y b1 0.30 b2 a0 0.25 a2 0.20 0.20 0.25 0.30 0.35 0.40 x Rank a2 Rank a0 X 0.263 0.282 0.265 0.242 X 0.282 0.298 0.286 0.265 Y 0.213 0.245 0.265 0.226 Y 0.245 0.271 0.299 0.265 Rank b2 Rank b1 X 0.298 0.313 0.306 0.286 X 0.313 0.329 0.329 0.306 Y 0.271 0.296 0.332 0.299 Y 0.296 0.325 0.371 0.332 Rank c0 X 0.329 0.358 0.363 0.329 Y 0.325 0.372 0.400 0.371 SPEC NO: DSAH4500 REV NO: V.3 DATE: AUG/15/2008 PAGE: 6 OF 8 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: R.CHEN ERP: 1201002975 AA2810RWS/Z Recommended Soldering Pattern (Units : mm; Tolerance: ±0.1) Reel Dimension Tape Specifications (Units : mm) SPEC NO: DSAH4500 REV NO: V.3 DATE: AUG/15/2008 PAGE: 7 OF 8 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: R.CHEN ERP: 1201002975 PACKING & LABEL SPECIFICATIONS AA2810RWS/Z SPEC NO: DSAH4500 REV NO: V.3 DATE: AUG/15/2008 PAGE: 8 OF 8 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: R.CHEN ERP: 1201002975