1.6X0.8mm SMD CHIP LED LAMP PRELIMINARY SPEC Part Number: APH1608RWF/A WHITE ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features Description The source color devices are made with InGaN on SiC Light Emitting Diode. Static electricity and surge damage the LEDS. 1.6mmX0.8mm SMT LED, 0.65mm THICKNESS. It is recommended to use a wrist band or anti-electrostatic LOW POWER CONSUMPTION. glove when handling the LEDs. W IDE VIEW ING ANGLE. All devices, equipment and machinery must be electrically IDEAL FOR BACKLIGHT AND INDICATOR. grounded. PACKAGE: 2000PCS / REEL . MOISTURE SENSITIVITY LEVEL : LEVEL 3. ELECTROSTATIC DISCHARGE THRESHOLD (HBM):1000V. TYP. COLOR TEMPERATURE:6500K COLOR COORDINATES:X=0.33,Y=0.34 ACC. TO CIE1931(WHITE). Applications traffic signaling. backlighting (illuminated advertising , general lighting). OPTICAL EFFICIENCY:7.9 lm/W(TYP.) COLOR REPRODUCTION INDEX:80 interior and exterior automotive lighting. substitution of micro incandescent lamps. RoHS COMPLIANT. reading lamps. signal and symbol luminaire for orientation. marker lights (e.g. steps, exit ways, etc). decorative and entertainment lighting. indoor and outdoor commercial and residential Package Dimensions architectural lighting. Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.1(0.004") unless otherwise noted. 3.Specifications are subject to change without notice. SPEC NO: DSAG3635 REV NO: V.4 APPROVED: J. Lu CHECKED: Allen Liu DATE: MAY/23/2006 DRAWN: Y.L.LI PAGE: 1 OF 7 ERP: 1203005370 Selection Guide Note2 Part No. Dice APH1608RWF/A WHITE (InGaN) luminous Intensity Iv(mcd) @ 20 mA Lens Type Note3 v (mlm) @ 20 mA Viewing Note1 Angle Min. Typ. Typ. 2θ θ1/2 70 140 520 120° YELLOW FLUORESCENT Absolute Maximum Ratings at TA=25°C Parameter Symbol Value Unit Power dissipation Pt 114 mW Reverse Voltage VR 5 V Junction temperature TJ 110 °C Operating Temperature Top -40 To +85 °C Storage Temperature Tstg -40 To +100 °C IF 30 mA IFM 100 mA Rth JA Rth JS 400 150 °C/W °C/W DC Forward Current Peak Forward Current Note4 Thermal resistance Note5 Junction/ambient Junction/solder point Notes: 1.θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2.Luminous intensity is measured by a current pulse of 10ms at a tolerance of ±15%. 3.The typical data of Luminous Flux can only reflect statistical figures, actual parameters of individual product could differ from the typical data. For the purpose of product enhancement, the typical data is subject to change without prior notice. 4.1/10 Duty Cycle, 0.1ms Pulse Width. 5.Rth(J-A) Results from mounting on PC board FR4 (pad size≥16 mm 2 per pad), Electrical / Optical Characteristics at TA=25°C Parameter Symbol Chromaticity coordinate x acc.to CIE1931 IF=20mA [Typ.] X Chromaticity coordinate y acc.to CIE1931 IF=20mA [Typ.] Y Value Unit Note1 0.33 - Note1 0.34 - Forward Voltage IF=20mA [Min.] Forward Voltage IF=20mA [Typ.] Forward Voltage 2.7 VF Note2 IF=20mA [Max.] Reverse Current (VR=5V) 3.3 3.8 [Typ.] 0.01 IR Reverse Current (VR=5V) V [Max.] 10 µA Temperature coefficient of x [Typ.] IF=20mA, -10°C T 100°C TC x -0.1 10-3 / °C Temperature coefficient of y [Typ.] IF=20mA, -10°C T 100°C TCy -0.2 10-3 / °C Temperature coefficient of VF IF=20mA, -10°C T 100°C [Typ.] TCV -2.5 mV/ °C Notes: 1.Chromaticity coordinates are measured by a current pulse of 20ms with a tolerance of ±0.01 in X and Y color coordinates. 2.Forward voltage is measured with a current pulse of 10ms at a tolerance of ±0.1V. SPEC NO: DSAG3635 REV NO: V.4 APPROVED: J. Lu CHECKED: Allen Liu DATE: MAY/23/2006 DRAWN: Y.L.LI PAGE: 2 OF 7 ERP: 1203005370 Brightness codes Note1 Note2 v (mlm) @ 20 mA luminous Intensity Iv(mcd) @ 20 mA Code. Min. Max. Typ. M 70 130 300 N 110 220 480 P 180 320 710 Q 280 420 960 Notes: 1.Luminous intensity is measured by a current pulse of 10ms at a tolerance of ±15%. 2.The typical data of Luminous Flux can only reflect statistical figures, actual parameters of individual product could differ from the typical data. For the purpose of product enhancement, the typical data is subject to change without prior notice. White APH1608RWF/A SPEC NO: DSAG3635 REV NO: V.4 APPROVED: J. Lu CHECKED: Allen Liu DATE: MAY/23/2006 DRAWN: Y.L.LI PAGE: 3 OF 7 ERP: 1203005370 APH1608RWF/A SPEC NO: DSAG3635 REV NO: V.4 APPROVED: J. Lu CHECKED: Allen Liu DATE: MAY/23/2006 DRAWN: Y.L.LI PAGE: 4 OF 7 ERP: 1203005370 Color Codes SPEC NO: DSAG3635 REV NO: V.4 APPROVED: J. Lu CHECKED: Allen Liu DATE: MAY/23/2006 DRAWN: Y.L.LI PAGE: 5 OF 7 ERP: 1203005370 APH1608RWF/A Recommended Soldering Pattern (Units: mm ; Tolerance: ± 0.1) Tape Specifications (Units : mm) Reel Dimension SPEC NO: DSAG3635 REV NO: V.4 APPROVED: J. Lu CHECKED: Allen Liu DATE: MAY/23/2006 DRAWN: Y.L.LI PAGE: 6 OF 7 ERP: 1203005370 PACKING & LABEL SPECIFICATIONS SPEC NO: DSAG3635 REV NO: V.4 APPROVED: J. Lu CHECKED: Allen Liu APH1608RWF/A DATE: MAY/23/2006 DRAWN: Y.L.LI PAGE: 7 OF 7 ERP: 1203005370