KINGBRIGHT AA3528SURCK

3.5x2.8 mm SMD CHIP LED LAMP
AA3528SURCK
HYPER RED
Description
Features
SINGLE COLOR.
The Hyper Red source color devices are made with DH
SUITABLE FOR ALL SMT ASSEMBLY AND SOLDER
InGaAlP on GaAs substrate Light Emitting Diode.
PROCESS.
AVAILABLE ON TAPE AND REEL.
IDEAL FOR BACKLIGHTING.
PACKAGE : 1500PCS / REEL.
RoHS COMPLIANT.
Package Dimensions
N ot es :
1. A l l di m ens i ons are i n m i l l i m et ers (i nc hes ).
2. T ol eranc e i s ±0. 25 (0. 0 1" ) unl es s ot her wi s e not e d.
3. S pec i f i c at i ons a re s ubj e c t t o c hange wi t hout n ot i c e.
SPEC NO: DSAA6808
REV NO: V.6
DATE: MAR/21/2005
PAGE: 1 OF 4
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: W.J.ZHU
ERP:1201000394
Selection Guide
Part No.
Dice
AA3528SURCK
Iv (mcd)
@ 20mA
Lens Type
HYPER RED (InGaAlP)
Viewing
Angle
Min.
Typ.
2θ
θ1/2
70
200
120°
WATER CLEAR
Note:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
Electrical / Optical Characteristics at TA=25°C
Symbol
Parameter
Device
λpeak
Peak Wavelength
Hyper Red
λD
Dominant Wavelength
∆λ1/2
Typ.
Max.
Units
Test Conditions
650
nm
IF=20mA
Hyper Red
635
nm
IF=20mA
Spectral Line Half-width
Hyper Red
28
nm
IF=20mA
C
Capacitance
Hyper Red
35
pF
VF=0V;f=1MHz
VF
Forward Voltage
Hyper Red
1.95
2.5
V
IF=20mA
IR
Reverse Current
Hyper Red
10
uA
VR = 5V
Absolute Maximum Ratings at TA=25°C
Parameter
Hyper Red
Units
Power dissipation
75
mW
DC Forward Current
30
mA
Peak Forward Current [1]
185
mA
5
V
Reverse Voltage
Operating / storage Temperature
-40°C To +85°C
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
SPEC NO: DSAA6808
REV NO: V.6
DATE: MAR/21/2005
PAGE: 2 OF 4
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: W.J.ZHU
ERP:1201000394
Hyper Red
AA3528SURCK
SPEC NO: DSAA6808
REV NO: V.6
DATE: MAR/21/2005
PAGE: 3 OF 4
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: W.J.ZHU
ERP:1201000394
AA3528SURCK
Recommended Soldering Pattern
(Units : mm)
Tape Specifications
(Units : mm)
Remarks:
If special sorting is required (e.g. binning based on forward voltage,luminous intensity, or wavelength),
the typical accuracy of the sorting process is as follows:
1. Wavelength: +/-1nm
2. Luminous Intensity: +/-15%
3. Forward Voltage: +/-0.1V
Note: Accuracy may depend on the sorting parameters.
SPEC NO: DSAA6808
REV NO: V.6
DATE: MAR/21/2005
PAGE: 4 OF 4
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: W.J.ZHU
ERP:1201000394