5.0X6.0mm SURFACE MOUNT LED LAMP ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES The Blue source color devices are made with InGaN on SiC COLOR. z SUITABLE FOR ALL SMT ASSEMBLY AND SOLDER z AVAILABLE z RoHS It is recommended to use a wrist band or ON TAPE AND REEL. anti-electrostatic glove when handling the LEDs. FOR BACKLIGHTING. z PACKAGE Light Emitting Diode. Static electricity and surge damage the LEDS. PROCESS. z IDEAL BLUE Description Features z SINGLE AA5060PBC/H All devices, equipment and machinery must be electrically : 500PCS / REEL. grounded. COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Specifications are subject to change without notice. SPEC NO: DSAB8382 REV NO: V.5 DATE: MAR/08/2005 PAGE: 1 OF 4 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: S.H.CHEN ERP:1201000520 Selection Guide Part No. Dice AA5060PBC/H Iv (mcd) @ 30mA Lens Type BLUE (InGaN) Viewing Angle Min. Typ. 2θ1/2 280 500 100° WATER CLEAR Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device λpeak Peak Wavelength Blue λD Dominant Wavelength ∆λ1/2 Typ. Max. Units Test Conditions 467 nm IF=20mA Blue 470 nm IF=20mA Spectral Line Half-width Blue 30 nm IF=20mA C Capacitance Blue 110 pF VF=0V;f=1MHz VF Forward Voltage Blue 3.7 4.3 V IF=20mA IR Reverse Current Blue 10 uA VR = 5V Absolute Maximum Ratings at TA=25°C Parameter Blue Units Power dissipation 129 mW DC Forward Current 30 mA Peak Forward Current [1] 100 mA 5 V Reverse Voltage Operating/Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAB8382 REV NO: V.5 DATE: MAR/08/2005 PAGE: 2 OF 4 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: S.H.CHEN ERP:1201000520 Blue AA5060PBC/H SPEC NO: DSAB8382 REV NO: V.5 DATE: MAR/08/2005 PAGE: 3 OF 4 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: S.H.CHEN ERP:1201000520 AA5060PBC/H Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) Remarks: If there is sorting requirement (eg. forward voltage, luminous intensity or wavelength), the condition as follows: 1.Wavelength: +/-1nm (Test condition is based on the sorting standard). 2.Luminous intensity: +/-15% (Test condition is based on the sorting standard). 3.Forward voltage: +/-0.1V (Test condition is based on the sorting standard). SPEC NO: DSAB8382 REV NO: V.5 DATE: MAR/08/2005 PAGE: 4 OF 4 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: S.H.CHEN ERP:1201000520