3.0x1.0 mm RIGHT ANGLE SMD CHIP LED LAMP ATTENTION APA3010MBC BLUE OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features z3.0mmx1.0mm RIGHT ANGLE SMT LED, 2.0mm Description THICKNESS. zLOW POWER CONSUMPTION. Light Emitting Diode. zWIDE VIEWING ANGLE. Static electricity and surge damage the LEDS. zIDEAL FOR BACK LIGHT AND INDICATOR. It is recommended to use a wrist band or zPACKAGE : 2000PCS / REEL. anti-electrostatic glove when handling the LEDs. zRoHS COMPLIANT. All devices, equipment and machinery must be electrically The Blue source color devices are made with GaN on SiC grounded. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.15(0.006") unless otherwise noted. 3. Specifications are subject to change without notice. SPEC NO: DSAB3267 REV NO: V.7 DATE: JUN/29/2005 PAGE: 1 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: S.H.CHEN ERP:1203000579 Selection Guide Part No. Dice APA3010MBC Iv (mcd) @ 20mA Lens Type BLUE (GaN) Viewing Angle Min. Typ. 2θ1/2 4 10 120° WATER CLEAR Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device λpeak Peak Wavelength Blue λD Dominant Wavelength ∆λ1/2 Typ. Max. Units Test Conditions 430 nm IF=20mA Blue 466 nm IF=20mA Spectral Line Half-width Blue 60 nm IF=20mA C Capacitance Blue 100 pF VF=0V;f=1MHz VF Forward Voltage Blue 3.8 4.5 V IF=20mA IR Reverse Current Blue 10 uA VR = 5V Absolute Maximum Ratings at TA=25°C Parameter Blue Units Power dissipation 105 mW DC Forward Current 30 mA Peak Forward Current [1] 150 mA 5 V Reverse Voltage -40°C To +85°C Operating / Storage Temperature Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAB3267 REV NO: V.7 DATE: JUN/29/2005 PAGE: 2 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: S.H.CHEN ERP:1203000579 Blue APA3010MBC SPEC NO: DSAB3267 REV NO: V.7 DATE: JUN/29/2005 PAGE: 3 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: S.H.CHEN ERP:1203000579 APA3010MBC Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) SPEC NO: DSAB3267 REV NO: V.7 DATE: JUN/29/2005 PAGE: 4 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: S.H.CHEN ERP:1203000579 PACKING & LABEL SPECIFICATIONS APA3010MBC Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. SPEC NO: DSAB3267 REV NO: V.7 DATE: JUN/29/2005 PAGE: 5 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: S.H.CHEN ERP:1203000579