2.1x0.6mm RIGHT ANGLE SURFACE LED LAMP ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features APA2106MBC BLUE Description 2.1mmX0.6mm RIGHT ANGLE SMT LED, 1.0mm The Blue source color devices are made with GaN on SiC THICKNESS. Light Emitting Diode. LOW POWER CONSUMPTION. Static electricity and surge damage the LEDS. W IDE VIEW ING ANGLE. It is recommended to use a wrist band or IDEAL FOR BACKLIGHT AND INDICATOR. anti-electrostatic glove when handling the LEDs. VARIOUS COLORS AND LENS TYPES AVAILABLE. All devices, equipment and machinery must be electrically PACKAGE: 2000PCS / REEL . grounded. RoHS COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2.Tolerance is ±0.1(0.004") unless otherwise noted. 3.Specifications are subject to change without notice. SPEC NO: DSAD1022 REV NO: V.6 DATE:JUN/28/2005 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: H.Q.YUAN PAGE: 1 OF 5 ERP:1203000494 Selection Guide Part No. Dice APA2106MBC Iv (mcd) @ 20 mA Lens Type BLUE (GaN) Viewing Angle Min. Typ. 2θ θ1/2 4 10 120° WATER CLEAR Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device λpeak Peak Wavelength Blue λD Dominant Wavelength ∆λ1/2 Typ. Max. Units Test Conditions 430 nm IF=20mA Blue 466 nm IF=20mA Spectral Line Half-width Blue 60 nm IF=20mA C Capacitance Blue 100 pF VF=0V;f=1MHz VF Forward Voltage Blue 3.8 4.5 V IF=20mA IR Reverse Current Blue 10 uA VR = 5V Absolute Maximum Ratings at TA=25°C Parameter Blue Units Power dissipation 135 mW DC Forward Current 30 mA Peak Forward Current [1] 150 mA 5 V Reverse Voltage Operating/Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAD1022 REV NO: V.6 DATE:JUN/28/2005 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: H.Q.YUAN PAGE: 2 OF 5 ERP:1203000494 Blue APA2106MBC SPEC NO: DSAD1022 REV NO: V.6 DATE:JUN/28/2005 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: H.Q.YUAN PAGE: 3 OF 5 ERP:1203000494 APA2106MBC Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) SPEC NO: DSAD1022 REV NO: V.6 DATE:JUN/28/2005 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: H.Q.YUAN PAGE: 4 OF 5 ERP:1203000494 PACKING & LABEL SPECIFICATIONS APA2106MBC Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. SPEC NO: DSAD1022 REV NO: V.6 DATE:JUN/28/2005 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: H.Q.YUAN PAGE: 5 OF 5 ERP:1203000494