3.5X2.8mm SURFACE MOUNT SMD CHIP LED PRELIMINARY SPEC ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Part Number: AAAF3528QBFSEJZGW BLUE HYPER ORANGE GREEN Description Features OUTSTANDING MATERIAL EFFICIENCY. The Blue source color devices are made with AlInGaN LOW POWER CONSUMPTION. on Al2O3 substrate Light Emitting Diode. ONE BLUE, ONE ORANGE AND ONE GREEN CHIPS IN The Super Bright de vice is based on a light emitting diode chip made from AlGaInP and bonded on silicon substrate. ONE PACKAGE. CAN PRODUCE ANY COLOR IN VISIBLE SPECTRUM, The Green source color devices are made with AlInGaN on Sapphire Light Emitting Diode. INCLUDING WHITE LIGHT. SUITABLE FOR ALL SMT ASSEMBLY AND SOLDER Static electricity and surge damage the LEDS. It is recommended to use a wrist band or PROCESS. AVAILABLE ON TAPE AND REEL. anti-electrostatic glove when handling the LEDs. MOISTURE SENSITIVITY LEVEL : LEVEL 4. All devices, equipment and machinery must be electrically RoHS COMPLIANT. grounded. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.2(0.008") unless otherwise noted. 3.Specifications are subject to change without notice. 4.The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAH1813 REV NO: V.1 DATE: JAN/31/2007 PAGE: 1 OF 7 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: D.M.LIU ERP:1201002752 Selection Guide Dice Part No. Iv (mcd) [2] @ 20mA Lens Type Min. BLUE (AlInGaN) AAAF3528QBFSEJZGW HYPER ORANGE ( AlGaInP ) WHITE DIFFUSED GREEN (AlInGaN) Typ. 110 250 900 1700 480 900 Viewing Angle [1] 2θ1/2 120° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2.Luminous Intensity / Luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength Blue Hyper Orange Green λD [1] Dominant Wavelength Δλ1/2 Max. Units Test Conditions 461 640 515 nm IF=20mA Blue Hyper Orange Green 465 630 525 nm IF=20mA Spectral Line Half-width Blue Hyper Orange Green 25 25 30 nm IF=20mA C Capacitance Blue Hyper Orange Green 100 27 45 pF VF=0V;f=1MHz VF [2] Forward Voltage Blue Hyper Orange Green 3.3 2.0 3.3 4.0 2.8 4.1 V IF=20mA IR Reverse Current Blue Hyper Orange Green 10 10 10 uA VR= 5V Notes: 1. Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Blue Hyper Orange Green Units Power dissipation 120 140 123 mW DC Forward Current 30 50 30 mA Peak Forward Current [1] 150 150 150 mA Reverse Voltage 5 V Operating / Storage Temperature -40°C TO +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAH1813 REV NO: V.1 DATE: JAN/31/2007 PAGE: 2 OF 7 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: D.M.LIU ERP:1201002752 AAAF3528QBFSEJZGW Blue SPEC NO: DSAH1813 REV NO: V.1 DATE: JAN/31/2007 PAGE: 3 OF 7 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: D.M.LIU ERP:1201002752 Hyper Orange SPEC NO: DSAH1813 REV NO: V.1 DATE: JAN/31/2007 PAGE: 4 OF 7 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: D.M.LIU ERP:1201002752 Green SPEC NO: DSAH1813 REV NO: V.1 DATE: JAN/31/2007 PAGE: 5 OF 7 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: D.M.LIU ERP:1201002752 AAAF3528QBFSEJZGW Recommended Soldering Pattern (Units : mm; Tolerance: ±0.1) Tape Specifications (Units : mm) SPEC NO: DSAH1813 REV NO: V.1 DATE: JAN/31/2007 PAGE: 6 OF 7 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: D.M.LIU ERP:1201002752 PACKING & LABEL SPECIFICATIONS AAAF3528QBFSEJZGW SPEC NO: DSAH1813 REV NO: V.1 DATE: JAN/31/2007 PAGE: 7 OF 7 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: D.M.LIU ERP:1201002752