5.0mm x 6.0mm FULL COLOR SURFACE MOUNT LED LAMP PRELIMINARY SPEC ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Part Number: AAA5060SURVGAPBEC HYPER RED GREEN BLUE Description Features CHIPS CAN BE CONTROLLED SEPARATELY. The Hyper Red source color devices are made with DH SUITABLE FOR ALL SMT ASSEMBLY AND InGaAlP on GaAs substrate Light Emitting Diode. SOLDER PROCESS. The Green source color devices are made with InGaN on AVAILABLE ON TAPE AND REEL. G-SiC Light Emitting Diode. PACKAGE: 500PCS / REEL. The Blue source color devices are made with InGaN on SiC MOISTURE SENSITIVITY LEVEL : LEVEL 4. Light Emitting Diode. RoHS COMPLIANT. Static electricity and surge damage the LEDS. It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs. All devices, equipment and machinery must be electrically grounded. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Specifications are subject to change without notice. SPEC NO: DSAG5855 REV NO: V.1 DATE: JUN/21/2006 PAGE: 1 OF 7 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: W.J.ZHU ERP: 1201002374 Selection Guide Dice Part No. Iv (mcd) [2] @50mA *30mA Lens Type Min. Typ. 380 500 *180 *350 *110 *250 HYPER RED (InGaAIP) AAA5060SURVGAPBEC GREEN (InGaN) WATER CLEAR BLUE (InGaN) Viewing Angle [1] 2 θ 1/2 100° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. *Luminous intensity with asterisk is measured at 30mA; Luminous intensity / luminous flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device λpeak Peak Wavelength Hyper Red Green Blue λD [1] Dominant Wavelength Δλ1/2 Typ. Max. Units Test Conditions 640 520 465 nm IF=20mA Hyper Red Green Blue 628 525 470 nm IF=20mA Spectral Line Half-width Hyper Red Green Blue 27 35 25 nm IF=20mA C Capacitance Hyper Red Green Blue 45 100 110 pF VF=0V;f=1MHz VF [2] Forward Voltage Hyper Red Green Blue 1.9 3.2 3.7 2.5 4.0 4.3 V IF=20mA IR Reverse Current Hyper Red Green Blue 10 10 10 uA VR = 5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Hyper Red Power dissipation [2] Green Blue 350 Units mW DC Forward Current 50 50 30 mA Peak Forward Current [1] 185 100 160 mA 5 5 5 V Reverse Voltage Operating / Storage Temperature -40°C To +85°C Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. Within 350mW at all chips are lightened. SPEC NO: DSAG5855 REV NO: V.1 DATE: JUN/21/2006 PAGE: 2 OF 7 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: W.J.ZHU ERP: 1201002374 AAA5060SURVGAPBEC Hyper Red SPEC NO: DSAG5855 REV NO: V.1 DATE: JUN/21/2006 PAGE: 3 OF 7 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: W.J.ZHU ERP: 1201002374 Green SPEC NO: DSAG5855 REV NO: V.1 DATE: JUN/21/2006 PAGE: 4 OF 7 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: W.J.ZHU ERP: 1201002374 Blue SPEC NO: DSAG5855 REV NO: V.1 DATE: JUN/21/2006 PAGE: 5 OF 7 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: W.J.ZHU ERP: 1201002374 AAA5060SURVGAPBEC Recommended Soldering Pattern (Units : mm; Tolerance: ±0.1) Tape Specifications (Units : mm) SPEC NO: DSAG5855 REV NO: V.1 DATE: JUN/21/2006 PAGE: 6 OF 7 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: W.J.ZHU ERP: 1201002374 PACKING & LABEL SPECIFICATIONS AAA5060SURVGAPBEC SPEC NO: DSAG5855 REV NO: V.1 DATE: JUN/21/2006 PAGE: 7 OF 7 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: W.J.ZHU ERP: 1201002374