KINGBRIGHT AP3216MBC

3.2x1.6mm SMD CHIP LED LAMP
ATTENTION
AP3216MBC
BLUE
OBSERVE PRECAUTIONS
FOR HANDLING
ELECTROSTATIC
DISCHARGE
SENSITIVE
DEVICES
Description
Features
3.2mmx1.6mm SMT LED, 1.1mm THICKNESS.
The Blue source color devices are made with GaN on SiC
LOW POWER CONSUMPTION.
Light Emitting Diode.
WIDE VIEWING ANGLE.
Static electricity and surge damage the LEDS.
IDEAL FOR BACKLIGHT AND INDICATOR.
It is recommended to use a wrist band or
VARIOUS COLORS AND LENS TYPES AVAILABLE.
anti-electrostatic glove when handling the LEDs.
PACKAGE : 2000PCS / REEL.
All devices, equipment and machinery must be electrically
RoHS COMPLIANT.
grounded.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.2(0.008") unless otherwise noted.
3. Specifications are subject to change without notice.
SPEC NO: DSAD0985
REV NO: V.4
DATE: MAR/10/2005
PAGE: 1 OF 4
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: Y.CHENG
ERP: 1203000353
Selection Guide
Part No.
Dice
AP3216MBC
Iv (mcd)
@ 20mA
Lens Type
BLUE (GaN)
Viewing
Angle
Min.
Typ.
2θ
θ1/2
4
10
120°
WATER CLEAR
Note:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
Electrical / Optical Characteristics at TA=25°C
Symbol
Parameter
Device
λpeak
Peak Wavelength
Blue
λD
Dominant Wavelength
∆λ1/2
Typ.
Max.
Units
Test Conditions
430
nm
IF=20mA
Blue
466
nm
IF=20mA
Spectral Line Half-width
Blue
60
nm
IF=20mA
C
Capacitance
Blue
100
pF
VF=0V;f=1MHz
VF
Forward Voltage
Blue
3.8
4.5
V
IF=20mA
IR
Reverse Current
Blue
10
uA
VR = 5V
Absolute Maximum Ratings at TA=25°C
Parameter
Blue
Units
Power dissipation
105
mW
DC Forward Current
30
mA
Peak Forward Current [1]
150
mA
5
V
Reverse Voltage
Operating / Storage Temperature
-40°C To +85°C
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
SPEC NO: DSAD0985
REV NO: V.4
DATE: MAR/10/2005
PAGE: 2 OF 4
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: Y.CHENG
ERP: 1203000353
Blue
AP3216MBC
SPEC NO: DSAD0985
REV NO: V.4
DATE: MAR/10/2005
PAGE: 3 OF 4
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: Y.CHENG
ERP: 1203000353
AP3216MBC
Recommended Soldering Pattern
(Units : mm)
Tape Specifications
(Units : mm)
Remarks:
If there is sorting requirement (eg. forward voltage, luminous intensity or wavelength), the condition as follows:
1.Wavelength: +/-1nm (Test condition is based on the sorting standard).
2.Luminous intensity: +/-15% (Test condition is based on the sorting standard).
3.Forward voltage: +/-0.1V (Test condition is based on the sorting standard).
SPEC NO: DSAD0985
REV NO: V.4
DATE: MAR/10/2005
PAGE: 4 OF 4
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: Y.CHENG
ERP: 1203000353