3.0mmx1.5mm SMD CHIP LED LAMP ATTENTION Part Number: APL3015MBC BLUE OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features Description z3.0mmx1.5mm zLOW SMT LED, 1.4mm THICKNESS. zWIDE zIDEAL VIEWING ANGLE. Static electricity and surge damage the LEDS. FOR BACKLIGHT AND INDICATOR. It is recommended to use a wrist band or anti-electrostatic zVARIOUS COLORS AND LENS TYPES AVAILABLE. zPACKAGE glove when handling the LEDs. All devices, equipment and machinery must be electrically : 2000PCS / REEL. zMOISTURE zRoHS The Blue source color devices are made with GaN on SiC Light Emitting Diode. POWER CONSUMPTION. SENSITIVITY LEVEL : LEVEL 3. grounded. COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.2(0.0079") unless otherwise noted. 3. Specifications are subject to change without notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAA8951 REV NO: V.5 DATE: JAN/04/2007 PAGE: 1 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: S.J.LIU ERP:1203001577 Selection Guide Dice Part No. APL3015MBC Lens Type BLUE (GaN) WATER CLEAR Iv (mcd) [2] @ 20mA Viewing Angle [1] Min. Typ. 2θ1/2 7 20 70° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity / luminous flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device λpeak Peak Wavelength Blue λD [1] Dominant Wavelength Δλ1/2 Typ. Max. Units Test Conditions 430 nm IF=20mA Blue 466 nm IF=20mA Spectral Line Half-width Blue 60 nm IF=20mA C Capacitance Blue 100 pF VF=0V;f=1MHz VF [2] Forward Voltage Blue 3.8 4.5 V IF=20mA IR Reverse Current Blue 10 uA VR = 5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Blue Units Power dissipation 135 mW DC Forward Current 30 mA Peak Forward Current [1] 150 mA 5 V Reverse Voltage Operating / Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAA8951 REV NO: V.5 DATE: JAN/04/2007 PAGE: 2 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: S.J.LIU ERP:1203001577 Blue APL3015MBC SPEC NO: DSAA8951 REV NO: V.5 DATE: JAN/04/2007 PAGE: 3 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: S.J.LIU ERP:1203001577 APL3015MBC Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Tape Specifications (Units : mm) SPEC NO: DSAA8951 REV NO: V.5 DATE: JAN/04/2007 PAGE: 4 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: S.J.LIU ERP:1203001577 PACKING & LABEL SPECIFICATIONS APL3015MBC SPEC NO: DSAA8951 REV NO: V.5 DATE: JAN/04/2007 PAGE: 5 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: S.J.LIU ERP:1203001577