3.2x1.0mmRIGHT ANGLE BI-COLOR SMD CHIP LED LAMP APBA3210SURKSYKC-F01 PRELIMINARY SPEC HYPER RED SUPER BRIGHT YELLOW Description Features LOW POWER CONSUMPTION. The Hyper Red source color devices are made with 3.2mmX1.0mm RIGHT ANGLE SMT LED,1.5mm THICKNESS. WIDE VIEWING ANGLE. DH InGaAlP on GaAs substrate Light Emitting Diode. The Super Bright Yellow source color devices are PACKAGE : 2000PCS / REEL. made with DH InGaAlP on GaAs substrate Light RoHS COMPLIANT. Emitting Diode. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.1(0.004") unless otherwise noted. 3.Specifications are subject to change without notice. SPEC NO: DSAF1094 REV NO: V.2 DATE: JUL/02/2005 PAGE: 1 OF 6 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: W.J.ZHU ERP: 1203003896-01 Selection Guide Part No. Dice Iv (mcd) @ 20mA Lens Type HYPER RED (InGaAlP) APBA3210SURKSYKC-F01 Viewing Angle Min. Typ. 110 200 36 80 WATER CLEAR SUPER BRIGHT YELLOW (InGaAlP) 2 θ 1/2 120° Note: 1.θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device λpeak Peak Wavelength Hyper Red Super Bright Yellow λD Dominant Wavelength ∆λ1/2 Typ. Max. Units Test Conditions 650 590 nm IF=20mA Hyper Red Super Bright Yellow 635 590 nm IF=20mA Spectral Line Half-width Hyper Red Super Bright Yellow 28 20 nm IF=20mA C Capacitance Hyper Red Super Bright Yellow 35 20 pF VF=0V;f=1MHz VF Forward Voltage Hyper Red Super Bright Yellow 1.95 2.0 2.5 2.5 V IF=20mA IR Reverse Current Hyper Red Super Bright Yellow 10 10 uA VR = 5V Absolute Maximum Ratings at TA=25°C Parameter Hyper Red Super Bright Yellow Units Power dissipation 170 125 mW DC Forward Current 30 30 mA Peak Forward Current [1] 185 175 mA 5 5 V Reverse Voltage Operating/storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAF1094 REV NO: V.2 DATE: JUL/02/2005 PAGE: 2 OF 6 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: W.J.ZHU ERP: 1203003896-01 APBA3210SURKSYKC-F01 Hyper Red SPEC NO: DSAF1094 REV NO: V.2 DATE: JUL/02/2005 PAGE: 3 OF 6 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: W.J.ZHU ERP: 1203003896-01 Super Bright Yellow SPEC NO: DSAF1094 REV NO: V.2 DATE: JUL/02/2005 PAGE: 4 OF 6 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: W.J.ZHU ERP: 1203003896-01 APBA3210SURKSYKC-F01 Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) SPEC NO: DSAF1094 REV NO: V.2 DATE: JUL/02/2005 PAGE: 5 OF 6 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: W.J.ZHU ERP: 1203003896-01 PACKING & LABEL SPECIFICATIONS APBA3210SURKSYKC-F01 Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. SPEC NO: DSAF1094 REV NO: V.2 DATE: JUL/02/2005 PAGE: 6 OF 6 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: W.J.ZHU ERP: 1203003896-01