OVAL SOLID STATE LAMP PRELIMINARY SPEC Part Number: WP5603PBDL/SD/Z BLUE ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Description Features zOUTSTANDING zRELIABLE zI.C. MATERIAL EFFICIENCY. Emitting Diode. AND RUGGED. COMPATIBLE/LOW CURRENT CAPABILITY. zRoHS The Blue source color devices are made with InGaN Light Static electricity and surge damage the LEDS. It is recommended to use a wrist band or anti-electrostatic COMPLIANT. glove when handling the LEDs. All devices, equipment and machinery must be electrically grounded. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. Specifications are subject to change without notice. SPEC NO: DSAH0990 REV NO: V.1 DATE: DEC/29/2006 PAGE: 1 OF 4 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: S.J.LIU ERP: 1101019825 Selection Guide Dice Part No. WP5603PBDL/SD/Z Iv (mcd) [2] @ 20mA Lens Type BLUE (InGaN) Viewing Angle [1] Min. Typ. 2θ1/2 650 1600 100°(H) 50°(V) BLUE SEMI DIFFUSED Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous Intensity/ Luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device λpeak Peak Wavelength Blue λD [1] Dominant Wavelength Δλ1/2 C Typ. Max. Units Test Conditions 458 nm IF=20mA Blue 465 nm IF=20mA Spectral Line Half-width Blue 22 nm IF=20mA Capacitance Blue 110 pF VF=0V;f=1MHz VF [2] Forward Voltage Blue 3.2 3.7 V IF=20mA IR Reverse Current Blue 10 uA VR = 5V Notes: 1. Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Blue Units 111 mW DC Forward Current 30 mA Peak Forward Current [1] 100 mA 5 V Power dissipation Reverse Voltage Operating / Storage Temperature -40°C To +85°C Lead Solder Temperature [2] 260°C For 3 Seconds Lead Solder Temperature [3] 260°C For 5 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. 3. 5mm below package base. SPEC NO: DSAH0990 REV NO: V.1 DATE: DEC/29/2006 PAGE: 2 OF 4 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: S.J.LIU ERP: 1101019825 Blue WP5603PBDL/SD/Z SPEC NO: DSAH0990 REV NO: V.1 DATE: DEC/29/2006 PAGE: 3 OF 4 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: S.J.LIU ERP: 1101019825 PACKING & LABEL SPECIFICATIONS WP5603PBDL/SD/Z SPEC NO: DSAH0990 REV NO: V.1 DATE: DEC/29/2006 PAGE: 4 OF 4 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: S.J.LIU ERP: 1101019825