T-1 3/4 (5mm) SOLID STATE LAMP Part Number: WP7113QBC/D Blue ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features Description z LOW POWER CONSUMPTION. The Blue source color devices are made with AlInGaN on z POPULAR T-1 3/4 DIAMETER PACKAGE. Sapphire Light Emitting Diode. z GENERAL PURPOSE LEADS. Static electricity and surge damage the LEDS. z RELIABLE AND RUGGED. It is recommended to use a wrist band or anti-electrostatic z LONG LIFE - SOLID STATE RELIABILITY. glove when handling the LEDs. z AVAILABLE ON TAPE AND REEL. All devices, equipment and machinery must be electrically z RoHS COMPLIANT. grounded. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. Specifications are subject to change without notice. SPEC NO: DSAG3481 REV NO: V.5 DATE: MAY/10/2007 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI PAGE: 1 OF 6 ERP: 1101005179 Selection Guide Part No. Dice WP7113QBC/D Lens Type Blue (AlInGaN) Viewing Angle [1] Iv (mcd) [2] @ 20mA Min. Typ. 2θ1/2 900 2200 16° WATER CLEAR Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength Blue λD [1] Dominant Wavelength Δλ1/2 Max. Units Test Conditions 468 nm IF=20mA Blue 470 nm IF=20mA Spectral Line Half-width Blue 25 nm IF=20mA C Capacitance Blue 100 pF VF=0V;f=1MHz VF [2] Forward Voltage Blue 3.3 4 V IF=20mA IR Reverse Current Blue 10 uA VR = 5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Blue Units Power dissipation 120 mW DC Forward Current 30 mA Peak Forward Current [1] 150 mA 5 V 200 V Reverse Voltage Electrostatic Discharge Threshold (HBM) Operating/Storage Temperature -40°C To +85°C Lead Solder Temperature [2] 260°C For 3 Seconds Lead Solder Temperature [3] 260°C For 5 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. 3. 5mm below package base. SPEC NO: DSAG3481 REV NO: V.5 DATE: MAY/10/2007 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI PAGE: 2 OF 6 ERP: 1101005179 Blue WP7113QBC/D SPEC NO: DSAG3481 REV NO: V.5 DATE: MAY/10/2007 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI PAGE: 3 OF 6 ERP: 1101005179 PACKING & LABEL SPECIFICATIONS WP7113QBC/D SPEC NO: DSAG3481 REV NO: V.5 DATE: MAY/10/2007 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI PAGE: 4 OF 6 ERP: 1101005179 SPEC NO: DSAG3481 REV NO: V.5 DATE: MAY/10/2007 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI PAGE: 5 OF 6 ERP: 1101005179 SPEC NO: DSAG3481 REV NO: V.5 DATE: MAY/10/2007 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI PAGE: 6 OF 6 ERP: 1101005179