T-1 3/4 (5mm) SOLID STATE LAMP Part Number: WP7083VGD/Z Green ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features Description z OUTSTANDING MATERIAL EFFICIENCY. The Green source color devices are made with InGaN Light z RELIABLE AND RUGGED. Emitting Diode. z I.C. COMPATIBLE. Static electricity and surge damage the LEDS. z RoHS COMPLIANT. It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs. All devices, equipment and machinery must be electrically grounded. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. Specifications are subject to change without notice. SPEC NO: DSAH1057 REV NO: V.4 DATE: APR/07/2008 PAGE: 1 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.F.Lu ERP: 1101020221 Selection Guide Part No. Dice WP7083VGD/Z Lens Type Green (InGaN) GREEN DIFFUSED Viewing Angle [1] Iv (mcd) [2] @ 20mA Min. Typ. 2θ1/2 1500 2300 60° Units Test Conditions Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. Max. λpeak Peak Wavelength Green 525 nm IF=20mA λD [1] Dominant Wavelength Green 535 nm IF=20mA Δλ1/2 Spectral Line Half-width Green 39 nm IF=20mA C Capacitance Green 65 pF VF=0V;f=1MHz VF [2] Forward Voltage Green 3.2 3.7 V IF=20mA IR Reverse Current Green 10 uA VR = 5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Green Units Power dissipation 111 mW DC Forward Current 30 mA Peak Forward Current [1] 100 mA 5 V 1000 V Reverse Voltage Electrostatic Discharge Threshold (HBM) Operating/Storage Temperature -40°C To +85°C Lead Solder Temperature [2] 260°C For 3 Seconds Lead Solder Temperature [3] 260°C For 5 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. 3. 5mm below package base. SPEC NO: DSAH1057 REV NO: V.4 DATE: APR/07/2008 PAGE: 2 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.F.Lu ERP: 1101020221 Green WP7083VGD/Z SPEC NO: DSAH1057 REV NO: V.4 DATE: APR/07/2008 PAGE: 3 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.F.Lu ERP: 1101020221 PACKING & LABEL SPECIFICATIONS WP7083VGD/Z SPEC NO: DSAH1057 REV NO: V.4 DATE: APR/07/2008 PAGE: 4 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.F.Lu ERP: 1101020221 SPEC NO: DSAH1057 REV NO: V.4 DATE: APR/07/2008 PAGE: 5 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.F.Lu ERP: 1101020221 SPEC NO: DSAH1057 REV NO: V.4 DATE: APR/07/2008 PAGE: 6 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.F.Lu ERP: 1101020221