TECHNICAL DATA KK7472 AND-Gated J-K Master-Slave FlipFlops with Reset and Clear LOGIC DIAGRAM ORDERING INFORMATION KK7472N Plastic KK7472D SOIC TA = -10° to 70° C for all packages PIN ASSIGNMENT PIN 14 =VCC PIN 7 = GND NC - No internal connection FUNCTION TABLE Inputs Output Reset Clear Clock J K Q Q L H X X X H L H L X X X L H L L H X * H* X X H H L L Q0 Q0 H H H L H L H H L H L H H H H H TOGGLE X =don’t care Q0 = the level of Q before the indicated input conditions were established. TOGGLE: Each output changes to the complement of its previous level on each active transition (pulse) of the clock. * This configuration is nonstable; that is, it will not persist whenpreset and clear inputs return to their inactive (high) level. 1 KK7472 MAXIMUM RATINGS* Symbol Parameter Value Unit VCC Supply Voltage 7.0 V VIN Input Voltage 5.5 V IOL Low Level Output Current 16 mA Tstg Storage Temperature Range -65 to +150 °C * Maximum Ratings are those values beyond which damage to the device may occur. Functional operation should be restricted to the Recommended Operating Conditions. RECOMMENDED OPERATING CONDITIONS Symbol Parameter Min Max Unit 5.25 V VCC Supply Voltage 4.75 VIH High Level Input Voltage 2.0 VIL Low Level Input Voltage 0.8 V IOH High Level Output Current -400 µA IOL Low Level Output Current 16 mA tw Pulse Width Clock high 20 Clock low 47 Reset or Clear low 25 V ns tsu Input Setup Time 0↑ ns th InputHold Time 0↓ ns fmax Maximum Clock Frequency TA Ambient Temperature Range -10 15 MHz +70 °C ↑↓ The arrow indicates the edge of the clock pulse used for reference: ↑ for the rising edge, ↓ for the falling edge. 2 KK7472 DC ELECTRICAL CHARACTERISTICS over full operating conditions Symbol Parameter Test Conditions Guaranteed Limit Min VIK Input Clamp Voltage VCC = min, IIN = -10 mA VOH High Level Output Voltage VCC = min, IOH =max VOL Low Level Output Voltage VCC = min, IOL =max II Input Current at Maximum Input Voltage VCC = max, VIN= 5.5 V IIH IIL Max -1.5 2.4 D, J, K Unit V V 0.4 V 1 mA 40 High Level Clear VCC = max, VIN = 2.4 V 80 Input Current Reset 80 Clock 80 D, J, K -1.6 Low Level Clear VCC = max, VIN = 0.4 V Input Current Reset -3.2 Clock -3.2 IOS* Short-Circuit Output Current VCC = max ICC Supply Current VCC = max, See Note 1 -3.2 -18 µA mA -55 mA 20 mA *Not more than one output should be shorted at a time, and duration of the short-circuit should not exceed one second. Note 1: With outputs open, ICC is measured with the Q and Q outputs high in turn. At the time of measurement, the clock input is grounded. 3 KK7472 AC ELECTRICAL CHARACTERISTICS (T = 25°C, VCC = 5.0 V, CL = 15 pF, RL = 390 Ω, Input tr = tf = 10 ns) Symbol Parameter tPLH Max Unit Propagation Delay Time, Low to High Level Output (from Reset to Q) 25 ns tPHL Propagation Delay Time, High to Low Level Output (from Reset to Q) 40 ns tPLH Propagation Delay Time, Low to High Level Output (from Clear to Q) 25 ns tPHL Propagation Delay Time, High to Low Level Output (from Clear to Q) 40 ns tPLH Propagation Delay Time, Low to High Level Output (from Clock to Q or Q) 25 ns tPHL Propagation Delay Time, High to Low Level Output (from Clock to Q or Q) 40 ns Figure 1. Switching Waveforms Min Figure 2. Switching Waveforms NOTES A. CL includes probe and jig capacitance. B. All diodes are 1N916 or 1N3064. Figure 3. Test Circuit 4 KK7472 N SUFFIX PLASTIC DIP (MS - 001AA) A Dimension, mm 8 14 B 7 1 Symbol MIN MAX A 18.67 19.69 B 6.1 7.11 5.33 C F L C -T- SEATING PLANE N G M K J H D 0.25 (0.010) M T NOTES: 1. Dimensions “A”, “B” do not include mold flash or protrusions. Maximum mold flash or protrusions 0.25 mm (0.010) per side. D 0.36 0.56 F 1.14 1.78 G 2.54 H 7.62 J 0° 10° K 2.92 3.81 L 7.62 8.26 M 0.2 0.36 N 0.38 D SUFFIX SOIC (MS - 012AB) Dimension, mm A 14 8 H B 1 G P 7 R x 45 C -TK D SEATING PLANE J 0.25 (0.010) M T C M NOTES: 1. Dimensions A and B do not include mold flash or protrusion. 2. Maximum mold flash or protrusion 0.15 mm (0.006) per side for A; for B ‑ 0.25 mm (0.010) per side. F M Symbol MIN MAX A 8.55 8.75 B 3.8 4 C 1.35 1.75 D 0.33 0.51 F 0.4 1.27 G 1.27 H 5.27 J 0° 8° K 0.1 0.25 M 0.19 0.25 P 5.8 6.2 R 0.25 0.5 5