DATA SHEET MOS FIELD EFFECT TRANSISTOR NP36P06SLG SWITCHING P-CHANNEL POWER MOSFET DESCRIPTION ORDERING INFORMATION The NP36P06SLG is P-channel MOS Field Effect PART NUMBER PACKAGE NP36P06SLG TO-252 (MP-3ZK) Transistor designed for high current switching applications. FEATURES (TO-252) • Super low on-state resistance RDS(on)1 = 30 mΩ MAX. (VGS = −10 V, ID = −18 A) RDS(on)2 = 40 mΩ MAX. (VGS = −4.5 V, ID = −18 A) • Low input capacitance Ciss = 3200 pF TYP. • Built-in gate protection diode ABSOLUTE MAXIMUM RATINGS (TA = 25°C) Drain to Source Voltage (VGS = 0 V) VDSS −60 V Gate to Source Voltage (VDS = 0 V) VGSS m20 V Drain Current (DC) (TC = 25°C) ID(DC) m36 A ID(pulse) m108 A Total Power Dissipation (TC = 25°C) PT1 56 W Total Power Dissipation (TA = 25°C) PT2 1.2 W Channel Temperature Tch 175 °C Tstg −55 to +175 °C IAS 23.4 A EAS 54.8 mJ Drain Current (pulse) Note1 Storage Temperature Single Avalanche Current Note2 Single Avalanche Energy Note2 Notes 1. PW ≤ 10 μs, Duty Cycle ≤ 1% 2. Starting Tch = 25°C, VDD = −30 V, RG = 25 Ω, VGS = −20 → 0 V THERMAL RESISTANCE Channel to Case Thermal Resistance Rth(ch-C) 2.68 °C/W Channel to Ambient Thermal Resistance Rth(ch-A) 125 °C/W The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version. Not all products and/or types are available in every country. Please check with an NEC Electronics sales representative for availability and additional information. Document No. D18008EJ5V0DS00 (5th edition) Date Published November 2007 NS Printed in Japan The mark <R> shows major revised points. The revised points can be easily searched by copying an "<R>" in the PDF file and specifying it in the "Find what:" field. 2006 NP36P06SLG ELECTRICAL CHARACTERISTICS (TA = 25°C) CHARACTERISTICS SYMBOL TEST CONDITIONS MIN. TYP. MAX. UNIT Zero Gate Voltage Drain Current IDSS VDS = −60 V, VGS = 0 V −10 μA Gate Leakage Current IGSS VGS = m20 V, VDS = 0 V m10 μA VGS(off) VDS = −10 V, ID = −1 mA −1.0 −2.5 V | yfs | VDS = −10 V, ID = −18 A 12 RDS(on)1 VGS = −10 V, ID = −18 A 24 30 mΩ RDS(on)2 VGS = −4.5 V, ID = −18 A 27 40 mΩ Gate to Source Cut-off Voltage Note Forward Transfer Admittance Drain to Source On-state Resistance Note −2.0 S Input Capacitance Ciss VDS = −10 V, 3200 pF Output Capacitance Coss VGS = 0 V, 350 pF Reverse Transfer Capacitance Crss f = 1 MHz 205 pF Turn-on Delay Time td(on) VDD = −30 V, ID = −18 A, 7 ns VGS = −10 V, 12 ns RG = 0 Ω 190 ns 110 ns Rise Time tr Turn-off Delay Time td(off) Fall Time tf Total Gate Charge QG VDD = −48 V, 52 nC Gate to Source Charge QGS VGS = −10 V, 6.9 nC QGD ID = −36 A 15 nC Gate to Drain Charge Note VF(S-D) IF = −36 A, VGS = 0 V Reverse Recovery Time trr IF = −36 A, VGS = 0 V, 46 ns Reverse Recovery Charge Qrr di/dt = 100 A/μs 75 nC Body Diode Forward Voltage 1.2 V Note Pulsed test PW ≤ 350 μs, Duty Cycle ≤ 2% TEST CIRCUIT 1 AVALANCHE CAPABILITY TEST CIRCUIT 2 SWITCHING TIME D.U.T. RG = 25 Ω D.U.T. L RL 50 Ω PG. VGS = −20 → 0 V VDD RG PG. VGS(−) VGS Wave Form 0 VGS 10% 90% VDD VDS(−) − IAS BVDSS VDS ID VGS(−) 0 VDS Wave Form τ VDD Starting Tch τ = 1 μs Duty Cycle ≤ 1% TEST CIRCUIT 3 GATE CHARGE D.U.T. PG. 2 IG = −2 mA RL 50 Ω VDD Data Sheet D18008EJ5V0DS VDS 90% 90% 10% 10% 0 td(on) tr td(off) ton tf toff NP36P06SLG TYPICAL CHARACTERISTICS (TA = 25°C) DERATING FACTOR OF FORWARD BIAS SAFE OPERATING AREA TOTAL POWER DISSIPATION vs. CASE TEMPERATURE 80 PT - Total Power Dissipation - W dT - Percentage of Rated Power - % 120 100 80 60 40 20 70 60 50 40 30 20 10 0 0 0 25 50 75 100 125 150 0 175 25 TC - Case Temperature - °C 50 75 100 125 150 175 TC - Case Temperature - °C FORWARD BIAS SAFE OPERATING AREA -1000 d it e Lim V ) n) i0 (o 1 S − R D GS = (V D =1 i0 0 μs 1 C m s ID(DC) PW 10 -10 m s r we Po ss Di -1 a ip n ti o Li d ite -0.1 -0.1 m TC = 25°C Single pulse -1 -10 -100 VDS - Drain to Source Voltage - V <R> TRANSIENT THERMAL RESISTANCE vs. PULSE WIDTH 1000 rth(t) - Transient Thermal Resistance - °C/W ID - Drain Current - A ID(pulse) -100 Rth(ch-A) = 125°C/W 100 10 Rth(ch-C) = 2.68°C/W 1 Single pulse 0.1 100 μ 1m 10 m 100 m 1 10 100 1000 PW - Pulse Width - s Data Sheet D18008EJ5V0DS 3 NP36P06SLG DRAIN CURRENT vs. DRAIN TO SOURCE VOLTAGE FORWARD TRANSFER CHARACTERISTICS -150 -1000 ID - Drain Current - A ID - Drain Current - A -100 VGS = −10 V -100 −4.5 V -50 TA = −55°C 25°C 125°C 175°C -10 -1 -0.1 -0.01 VDS = −10 V Pulsed Pulsed 0 -0.001 0 -2 -4 -6 -8 -10 0 VDS - Drain to Source Voltage - V -2.5 -2 -1.5 -1 VDS = −10 V ID = −1 mA -50 0 50 100 150 10 TA = −55°C 25°C 125°C 175°C 1 0.1 -0.1 60 50 VGS = −4.5 V −10 V 10 0 -1 -10 -100 -1000 ID - Drain Current - A 4 -10 -100 DRAIN TO SOURCE ON-STATE RESISTANCE vs. GATE TO SOURCE VOLTAGE RDS(on) - Drain to Source On-state Resistance - mΩ RDS(on) - Drain to Source On-state Resistance - mΩ Pulsed 20 -1 ID - Drain Current - A 80 30 -5 VDS = −10 V Pulsed 200 DRAIN TO SOURCE ON-STATE RESISTANCE vs. DRAIN CURRENT 40 -4 100 Tch - Channel Temperature - °C 70 -3 FORWARD TRANSFER ADMITTANCE vs. DRAIN CURRENT | yfs | - Forward Transfer Admittance - S VGS(th) - Gate to Source Cut-off Voltage - V -3 0 -100 -2 VGS - Gate to Source Voltage - V GATE TO SOURCE CUT-OFF VOLTAGE vs. CHANNEL TEMPERATURE -0.5 -1 50 40 30 20 10 ID = −18 A Pulsed 0 0 -5 -10 -15 VGS - Gate to Source Voltage - V Data Sheet D18008EJ5V0DS -20 NP36P06SLG CAPACITANCE vs. DRAIN TO SOURCE VOLTAGE 10000 VGS = −4.5 V −10 V ID = −18 A Pulsed -50 0 50 100 150 Ciss 1000 Coss 100 Crss VGS = 0 V f = 1 MHz 10 -0.1 200 SWITCHING CHARACTERISTICS -100 DYNAMIC INPUT/OUTPUT CHARACTERISTICS 1000 -60 td(off) tf 100 tr 10 td(on) VDD = −30 V, VGS = −10 V RG = 0 Ω 1 -0.1 VDS - Drain to Source Voltage - V td(on), tr, td(off), tf - Switching Time - ns -10 VDS - Drain to Source Voltage - V Tch - Channel Temperature - °C -12 VDD = −48 V −30 V −12 V -50 -40 -10 -8 -6 -30 VGS -20 -4 -10 -2 VDS ID = −36 A 0 -1 -10 -100 0 0 ID - Drain Current - A 20 40 60 QG - Gate Charge - nC SOURCE TO DRAIN DIODE FORWARD VOLTAGE REVERSE RECOVERY TIME vs. DIODE FORWARD CURRENT -1000 1000 -100 VGS = −10 V -10 0V -1 -0.1 Pulsed trr - Reverse Recovery Time - ns IF - Diode Forward Current - A -1 100 10 -0.01 di/dt = 100 A/μs VGS = 0 V 1 0 0.5 1 1.5 VF(S-D) - Source to Drain Voltage - V -0.1 -1 -10 -100 IF - Diode Forward Current - A Data Sheet D18008EJ5V0DS 5 VGS - Gate to Source Voltage - V 60 55 50 45 40 35 30 25 20 15 10 5 0 -100 Ciss, Coss, Crss - Capacitance - pF RDS(on) - Drain to Source On-state Resistance - mΩ DRAIN TO SOURCE ON-STATE RESISTANCE vs. CHANNEL TEMPERATURE NP36P06SLG PACKAGE DRAWING (Unit: mm) TO-252 (MP-3ZK) 2.3±0.1 1.0 TYP. 6.5±0.2 5.1 TYP. 4.3 MIN. 0.5±0.1 No Plating 3 1.14 MAX. 0.51 MIN. 2 0.8 1 6.1±0.2 10.4 MAX. (9.8 TYP.) 4.0 MIN. 4 No Plating 0 to 0.25 0.5±0.1 0.76±0.12 2.3 2.3 1. Gate 2. Drain 3. Source 4. Fin (Drain) 1.0 EQUIVALENT CIRCUIT Drain Body Diode Gate Gate Protection Diode Source Remark The diode connected between the gate and source of the transistor serves as a protector against ESD. When this device actually used, an additional protection circuit is externally required if a voltage exceeding the rated voltage may be applied to this device. 6 Data Sheet D18008EJ5V0DS NP36P06SLG • The information in this document is current as of November, 2007. The information is subject to change without notice. For actual design-in, refer to the latest publications of NEC Electronics data sheets or data books, etc., for the most up-to-date specifications of NEC Electronics products. Not all products and/or types are available in every country. Please check with an NEC Electronics sales representative for availability and additional information. • No part of this document may be copied or reproduced in any form or by any means without the prior written consent of NEC Electronics. NEC Electronics assumes no responsibility for any errors that may appear in this document. • NEC Electronics does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of NEC Electronics products listed in this document or any other liability arising from the use of such products. No license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC Electronics or others. • Descriptions of circuits, software and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. The incorporation of these circuits, software and information in the design of a customer's equipment shall be done under the full responsibility of the customer. NEC Electronics assumes no responsibility for any losses incurred by customers or third parties arising from the use of these circuits, software and information. • While NEC Electronics endeavors to enhance the quality, reliability and safety of NEC Electronics products, customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To minimize risks of damage to property or injury (including death) to persons arising from defects in NEC Electronics products, customers must incorporate sufficient safety measures in their design, such as redundancy, fire-containment and anti-failure features. • NEC Electronics products are classified into the following three quality grades: "Standard", "Special" and "Specific". The "Specific" quality grade applies only to NEC Electronics products developed based on a customerdesignated "quality assurance program" for a specific application. The recommended applications of an NEC Electronics product depend on its quality grade, as indicated below. Customers must check the quality grade of each NEC Electronics product before using it in a particular application. "Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots. "Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support). "Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems and medical equipment for life support, etc. The quality grade of NEC Electronics products is "Standard" unless otherwise expressly specified in NEC Electronics data sheets or data books, etc. If customers wish to use NEC Electronics products in applications not intended by NEC Electronics, they must contact an NEC Electronics sales representative in advance to determine NEC Electronics' willingness to support a given application. (Note) (1) "NEC Electronics" as used in this statement means NEC Electronics Corporation and also includes its majority-owned subsidiaries. (2) "NEC Electronics products" means any product developed or manufactured by or for NEC Electronics (as defined above). M8E 02. 11-1