TI TPS3824

TPS382x-xx
TPS382xA-xx
www.ti.com
SLVS165J – APRIL 1998 – REVISED APRIL 2013
Processor Supervisory Circuits
Check for Samples: TPS382x-xx, TPS382xA-xx
FEATURES
1
•
2
•
•
•
•
•
•
•
Power-On Reset Generator With Fixed Delay
Time of 200 ms (TPS3823/4/5/8) or 25 ms
(TPS3820)
Manual Reset Input (TPS3820/3/5/8)
Reset Output Available in Active-Low
(TPS3820/3/4/5), Active-High (TPS3824/5) and
Open-Drain (TPS3828)
Supply Voltage Supervision Range:
2.5 V, 3 V, 3.3 V, 5 V
Watchdog Timer (TPS3820/3/4/8)
Supply Current of 15 μA (Typ)
SOT23-5 Package
Temperature Range: −40°C to 85°C
TPS3820, TPS3823, TPS3828: DBV PACKAGE
TPS3820A, TPS3823A, TPS3828A: DBV PACKAGE
(TOP VIEW)
•
•
•
•
•
•
•
Applications Using DSPs, Microcontrollers, or
Microprocessors
Industrial Equipment
Programmable Controls
Automotive Systems
Portable/Battery-Powered Equipment
Intelligent Instruments
Wireless Communications Systems
Notebook/Desktop Computers
1
GND
2
MR
3
5
VDD
4
WDI
TPS3824 and TPS3824A: DBV PACKAGE
(TOP VIEW)
APPLICATIONS
•
RESET
RESET
1
GND
2
RESET
3
5
VDD
4
WDI
TPS3825 and TPS3825A: DBV PACKAGE
(TOP VIEW)
RESET
1
GND
2
RESET
3
5
VDD
4
MR
TYPICAL APPLICATION
3.3 V
DESCRIPTION
The TPS382x family of supervisors provide circuit
initialization and timing supervision, primarily for DSP
and processor-based systems. During power-on,
RESET asserts when the supply voltage VDD
becomes higher than 1.1 V. Thereafter, the supply
voltage supervisor monitors VDD and keeps RESET
active as long as VDD remains below the threshold
voltage, VIT−. An internal timer delays the return of
the output to the inactive state (high) to ensure proper
system reset. The delay time, td, starts after VDD has
risen above the threshold voltage, VIT−. When the
supply voltage drops below the threshold voltage
VIT−, the output becomes active (low) again. No
external components are required. All the devices of
this family have a fixed-sense threshold voltage, VIT–,
set by an internal voltage divider.
100 nF
VDD
RESET
VDD
RESET
TPS3823-33
MR
WDI
MSP430C325
I/O
GND
GND
1
2
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
All trademarks are the property of their respective owners.
UNLESS OTHERWISE NOTED this document contains
PRODUCTION DATA information current as of publication date.
Products conform to specifications per the terms of Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 1998–2013, Texas Instruments Incorporated
TPS382x-xx
TPS382xA-xx
SLVS165J – APRIL 1998 – REVISED APRIL 2013
www.ti.com
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
DESCRIPTION (CONTINUED)
The TPS3820/3/5/8 devices incorporate a manual reset input, MR. A low level at MR causes RESET to become
active. The TPS3824/5 devices include a high-level output RESET. TPS3820/3/4/8 have a watchdog timer that is
periodically triggered by a positive or negative transition at WDI. When the supervising system fails to retrigger
the watchdog circuit within the time-out interval, ttout, RESET becomes active for the time period td. This event
also reinitializes the watchdog timer. Leaving WDI unconnected disables the watchdog. In applications where the
input to the WDI pin may be active (transitioning high and low) when the TPS3820/3/4/8 is asserting RESET, the
TPS3820/3/4/8 does not return to a non-reset state when the input voltage is above VT.
If the application requires that input to WDI is active when RESET pin is asserted, then the “A” version of the
device should be used. The “A” versions will not latch the RESET to the asserted state if a WDI pulse is received
while RESET is asserted.
Figure 1 shows how to decouple WDI from the active signal using when using the non−”A” version. This is
accomplished with an N−Channel FET in series with the WDI pin, with the gate of the FET connected to the
RESET output. The “A” version of the device does not need this FET but will operate in circuits that have it.
Therefore, the “A” version is backward compatible with the non’”A” versions.
TPS3824
WDI External
WDI
RESET
Figure 1.
The product spectrum is designed for supply voltages of 2.5 V, 3 V, 3.3 V, and 5 V. The circuits are available in
an SOT23-5 package. The TPS382x devices are characterized for operation over a temperature range of −40°C
to 85°C.
PACKAGE INFORMATION (1)
(1)
(2)
(3)
(4)
2
DEVICE NAME (2)
DEVICE NAME (3)
THRESHOLD VOLTAGE (4)
TPS3820-33DBVT
TPS3820-33DBVR
2.93 V
PDEI
TPS3820-50DBVT
TPS3820-50DBVR
4.55 V
PDDI
TPS3823-25DBVT
TPS3823-25DBVR
2.25 V
PAPI
TPS3823-30DBVT
TPS3823-30DBVR
2.63 V
PAQI
TPS3823-33DBVT
TPS3823-33DBVR
2.93 V
PARI
TPS3823-50DBVT
TPS3823-50DBVR
4.55 V
PASI
TPS3824-25DBVT
TPS3824-25DBVR
2.25 V
PATI
TPS3824-30DBVT
TPS3824-30DBVR
2.63 V
PAUI
TPS3824-33DBVT
TPS3824-33DBVR
2.93 V
PAVI
TPS3824-50DBVT
TPS3824-50DBVR
4.55 V
PAWI
TPS3825-33DBVT
TPS3825-33DBVR
2.93 V
PDGI
TPS3825-50DBVT
TPS3825-50DBVR
4.55 V
PDFI
TPS3828-33DBVT
TPS3828-33DBVR
2.93 V
PDII
TPS3828-50DBVT
TPS3828-50DBVR
4.55 V
PDHI
TPS3823A-33DBVT
TPS3823A-33DBVR
2.93 V
PYPI
MARKING
For the most current package and ordering information see the Package Option Addendum at the end
of this document, or see the TI web site at www.ti.com.
The DBVT package indicates tape and reel of 250 parts.
The DBVR package indicates tape and reel of 3000 parts.
For other threshold voltage versions, please contact the local TI sales office.
Submit Documentation Feedback
Copyright © 1998–2013, Texas Instruments Incorporated
Product Folder Links: TPS382x-xx TPS382xA-xx
TPS382x-xx
TPS382xA-xx
www.ti.com
SLVS165J – APRIL 1998 – REVISED APRIL 2013
FUNCTION/TRUTH TABLE
INPUTS
(1)
(2)
OUTPUTS
VDD > VIT
RESET
RESET (2)
L
0
L
H
L
1
L
H
H
0
L
H
H
1
H
L
MR
(1)
TPS3820/3/5/8
TPS3824/5
FUNCTIONAL BLOCK DIAGRAM
VDD
+
_
52 kΩ
RESET(1)
RESET
Logic
RESET
VREF
MR(2)
Auto−Reset
Oscillator
40 kΩ
Transition
Detector
WDI
(1)
TPS3824/5
(2)
TPS3820/3/5/8
Watchdog
Timer Logic
TIMING DIAGRAM
VDD
VIT
1.1 V
td
td
tt(out)
td
undefined
undefined
RESET
WDI
Copyright © 1998–2013, Texas Instruments Incorporated
Product Folder Links: TPS382x-xx TPS382xA-xx
Submit Documentation Feedback
3
TPS382x-xx
TPS382xA-xx
SLVS165J – APRIL 1998 – REVISED APRIL 2013
www.ti.com
ABSOLUTE MAXIMUM RATINGS (1) (2)
over operating free-air temperature range (unless otherwise noted)
VDD
VALUE
UNIT
6V
V
Supply voltage
RESET, RESET, MR, WDI
−0.3 to (VDD + 0.3)
V
IOL
Maximum low output current
5
mA
IOH
Maximum high output current
–5
mA
IIK
Input clamp current range (VI < 0 or VI > VDD)
±10
mA
IOK
Output clamp current range (VO < 0 or VO > VDD)
±10
mA
Continuous total power dissipation
See Dissipation Rating Table
TA
Operating free-air temperature range
–40 to +85
°C
Tstg
Storage temperature range
–65 to +150
°C
260
°C
Soldering temperature
(1)
(2)
Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under recommended operating
conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
All voltage values are with respect to GND.
DISSIPATION RATINGS
PACKAGE
TA ≤ 25°C
POWER RATING
OPERATING
FACTOR
ABOVE TA = 25°C
TA = 70°C
POWER RATING
TA = 85°C
POWER RATING
DBV
437 mW
3.5 mW/°C
280 mW
227 mW
RECOMMENDED OPERATING CONDITIONS
over operating free-air temperature range (unless otherwise noted)
MIN
VDD
Supply voltage
VI
Input voltage
VIH
High-level input voltage at MR and WDI
VIL
Low-level input voltage
Δt/ΔV
Input transition rise and fall rate at MR or WDI
TA
Operating free-air temperature range
4
Submit Documentation Feedback
MAX UNIT
1.1
5.5
V
0
VDD + 0.3
V
0.7 × VDD
V
0.3 × VDD
V
100 ns/V
–40
85
°C
Copyright © 1998–2013, Texas Instruments Incorporated
Product Folder Links: TPS382x-xx TPS382xA-xx
TPS382x-xx
TPS382xA-xx
www.ti.com
SLVS165J – APRIL 1998 – REVISED APRIL 2013
ELECTRICAL CHARACTERISTICS
over operating free-air temperature range (unless otherwise noted)
PARAMETER
RESET
VOH
High-level output voltage
RESET
TEST CONDITIONS
TPS382x-25
VDD = VIT− + 0.2 V, IOH = −20 μA
TPS382x-30
TPS382x-33
TPS382xA-33
VDD = VIT− + 0.2 V, IOH = −30 μA
TPS382x-50
VDD = VIT− + 0.2 V IOH = −120 μA
TPS3824-25
TPS3825-25
VDD ≥ 1.8 V, IOH = −100 μA
MIN
MAX
0.8 × VDD
UNIT
V
VDD − 1.5 V
TPS3824-30
TPS3825-30
TPS3824-33
TPS3825-33
TYP
0.8 × VDD
V
VDD ≥ 1.8 V, IOH = −150 μA
TPS3824-50
TPS3825-50
TPS3824-25
TPS3825-25
RESET
VOL
Low-level output voltage
RESET
TPS3824-30
TPS3825-30
TPS3824-33
TPS3825-33
VDD = VIT− + 0.2 V, IOL = 1 mA
VDD = VIT− + 0.2 V, IOL = 1.2 mA
TPS3824-50
TPS3825-50
VDD = VIT− + 0.2 V, IOL = 3 mA
TPS382x-25
VDD = VIT− −0.2 V, IOL = 1 mA
TPS382x-30
VDD = VIT− –0.2 V, IOL = 1.2 mA
0.4
V
0.4
V
0.4
V
TPS382x-33
TPS382xA-33
TPS382x-50
Power-up reset voltage (1)
VDD = VIT− − 0.2 V, IOL = 3 mA
VDD ≥ 1.1 V, IOL = 20 μA
TPS382x-25
2.21
2.25
2.30
2.59
2.63
2.69
2.88
2.93
3
TPS382x-50
4.49
4.55
4.64
TPS382x-25
2.20
2.25
2.30
TPS382x-30
2.57
2.63
2.69
2.86
2.93
3
4.46
4.55
4.64
TPS382x-30
TPS382x-33
TPS382xA-33
Negative-going input
threshold voltage (2)
VIT−
TPS382x-33
TPS382xA-33
TA = 0°C to +85°C
TA = − 40°C to +85°C
TPS382x-50
V
V
TPS382x-25
TPS382x-30
Vhys
Hysteresis at VDD input
IIH(AV)
Average high-level input current
IIL(AV)
Average low-level input current
IIH
High-level input current
IIL
Low-level input current
30
TPS382x-50
(1)
(2)
mV
TPS382x-33
TPS382xA-33
50
WDI = VDD, time average (dc = 88%)
120
WDI = 0.3 V, VDD = 5.5 V time average (dc = 12%)
–15
WDI
WDI = VDD
140
190
MR
MR = VDD × 0.7, VDD = 5.5 V
–40
–60
WDI
WDI = 0.3 V, VDD = 5.5 V
140
190
MR
MR = 0.3 V, VDD = 5.5 V
–110
–160
WDI
µA
µA
µA
The lowest supply voltage at which RESET becomes active. tr, VDD ≥ 15 μs/V.
To ensure best stability of the threshold voltage, a bypass capacitor (ceramic, 0.1 μF) should be placed near the supply terminals.
Copyright © 1998–2013, Texas Instruments Incorporated
Product Folder Links: TPS382x-xx TPS382xA-xx
Submit Documentation Feedback
5
TPS382x-xx
TPS382xA-xx
SLVS165J – APRIL 1998 – REVISED APRIL 2013
www.ti.com
ELECTRICAL CHARACTERISTICS (continued)
over operating free-air temperature range (unless otherwise noted)
PARAMETER
TEST CONDITIONS
MIN
TYP
MAX
UNIT
TPS382x-25
TPS382x-30
IOS
Output short-circuit
current (3)
RESET
TPS382x-33
TPS382xA-33
–400
VDD = VIT, max + 0.2 V, VO = 0 V
TPS382x-50
IDD
Supply current
–800
WDI, MR, and Outputs unconnected
15
Internal pullup resistor at MR
Ci
(3)
Input capacitance at MR, WDI
µA
VI = 0 V to 5.5 V
25
µA
52
kΩ
5
pF
The RESET short-circuit current is the maximum pullup current when RESET is driven low by a μP bidirectional reset pin.
TIMING REQUIREMENTS AT
At RL = 1 MΩ, CL = 50 pF, TA = 25°C
PARAMETER
tw
Pulse width
TEST CONDITIONS
MIN
MAX
UNIT
at VDD
VDD = VIT− + 0.2 V, VDD = VIT– – 0.2 V
6
μs
at MR
VDD ≥ VIT− + 0.2 V, VIL = 0.3 x VDD, VIH = 0.7 x VDD
1
μs
at WDI
VDD ≥ VIT− + 0.2 V, VIL = 0.3 x VDD, VIH = 0.7 x VDD
100
ns
SWITCHING CHARACTERISTICS
At RL = 1 MΩ, CL = 50 pF, TA = 25°C
PARAMETER
ttout
td
tPHL
tPLH
6
Watchdog time out
Delay time
Propagation (delay) time,
high-to-low-level output
Propagation (delay) time,
low-to-high-level output
TEST CONDITIONS
TPS3820
TPS3823/4/8, TPS3823A
TPS3820
TPS3823/4/5/8, TPS3823A
MIN
TYP
MAX
UNIT
VDD ≥ VIT− + 0.2 V,
See timing diagram
112
200
300
ms
0.9
1.6
2.5
s
VDD ≥ VIT− +0.2 V,
See timing diagram
15
25
37
120
200
300
MR to RESET delay
(TPS3820/3/5/8, TPS3823A)
VDD ≥ VIT− +0.2 V,
VIL = 0.3 x VDD,
VIH = 0.7 x VDD
0.1
VDD to RESET delay
VIL = VIT– –0.2 V,
VIH = VIT– + 0.2 V
25
VDD ≥ VIT− +0.2 V,
MR to RESET delay (TPS3824/5) VIL = 0.3 x VDD,
VIH = 0.7 x VDD
0.1
VIL = VIT– –0.2 V,
VIH = VIT– + 0.2 V
25
VDD to RESET delay
(TPS3824/5)
Submit Documentation Feedback
ms
µs
µs
Copyright © 1998–2013, Texas Instruments Incorporated
Product Folder Links: TPS382x-xx TPS382xA-xx
TPS382x-xx
TPS382xA-xx
www.ti.com
SLVS165J – APRIL 1998 – REVISED APRIL 2013
TYPICAL CHARACTERISTICS
SUPPLY CURRENT
vs
SUPPLY VOLTAGE
19
MR = Open
WDI = Open
TA = 25°C
1.001
17
15
1
I DD− Supply Current − µ A
Normalized Input Threshold Voltage −V IT (TA), VIT (25°C)
NORMALIZED INPUT THRESHOLD VOLTAGE
vs
FREE-AIR TEMPERATURE AT VDD
0.999
0.998
0.997
13
TPS382x-33
11
9
7
5
3
0.996
1
0.995
−40
−15
10
60
35
−1
−0.5
85
0.5
1.5
TA − Free-Air Temperature − °C
Figure 2.
6.5
3
VOL − Low-Level Output Voltage − V
VDD = 5.5 V
WDI = Open
0
I I − Input Current − µ A
5.5
4.5
LOW-LEVEL OUTPUT VOLTAGE
vs
LOW-LEVEL OUTPUT CURRENT
50
−40°C
−100
85°C
−150
−200
−1
3.5
Figure 3.
INPUT CURRENT
vs
INPUT VOLTAGE AT MR
−50
2.5
VDD − Supply Voltage − V
VDD = 2.66 V
WDI = Open
MR = Open
2.5
2
1.5
85°C
1
−40°C
0.5
0
0
1
2
3
4
VI − Input Voltage at MR − V
Figure 4.
5
6
0
1
2
3
4
5
6
7
8
9
10
IOL − Low-Level Output Current − mA
Figure 5.
Copyright © 1998–2013, Texas Instruments Incorporated
Product Folder Links: TPS382x-xx TPS382xA-xx
Submit Documentation Feedback
7
TPS382x-xx
TPS382xA-xx
SLVS165J – APRIL 1998 – REVISED APRIL 2013
www.ti.com
TYPICAL CHARACTERISTICS (continued)
HIGH-LEVEL OUTPUT VOLTAGE
vs
HIGH-LEVEL OUTPUT CURRENT
HIGH-LEVEL OUTPUT VOLTAGE
vs
HIGH-LEVEL OUTPUT CURRENT
6
VDD = 3.2 V
WDI = Open
MR = Open
3
VOH − High-Level Output Voltage − V
VOH − High-Level Output Voltage − V
3.5
2.5
−40°C
2
1.5
85°C
1
0.5
0
VDD = 5.5 V
WDI = Open
MR = Open
5
4
−40°C
3
85°C
2
1
0
0
−50
−100
−150
−200
−250
0
IOH − High-Level Output Current − µA
Figure 6.
−100
−200
−300
−400
−500
−600
−700
IOH − High-Level Output Current − µA
Figure 7.
MINIMUM PULSE DURATION AT VDD
vs
VDD THRESHOLD OVERDRIVE
t w − Minimum Pulse Duration at VDD − µs
10
WDI = Open
MR = Open
8
6
4
2
0
0
200
400
600
800
1000
VDD − Threshold Overdrive − mV
Figure 8.
8
Submit Documentation Feedback
Copyright © 1998–2013, Texas Instruments Incorporated
Product Folder Links: TPS382x-xx TPS382xA-xx
TPS382x-xx
TPS382xA-xx
www.ti.com
SLVS165J – APRIL 1998 – REVISED APRIL 2013
REVISION HISTORY
NOTE: Page numbers for previous revisions may differ from page numbers in the current version.
Changes from Revision I (February 2013) to Revision J
Page
•
Added TPS382xA-33 to second RESET row of VOH parameter in Electrical Characteristics table ...................................... 5
•
Added TPS382xA-33 to third RESET row of VOL parameter in Electrical Characteristics table ........................................... 5
•
Corrected typo in VOL RESET parameter test conditions ..................................................................................................... 5
•
Added TPS382xA-33 to third and seventh rows of VIT– parameter in Electrical Characteristics table ................................. 5
•
Added TPS382xA-33 to third row of Vhys parameter in Electrical Characteristics table ....................................................... 5
•
Added TPS382xA-33 to third row of IOS parameter in Electrical Characteristics table ......................................................... 6
•
Added TPS3823A to second row of ttout parameter in Switching Characteristics table ........................................................ 6
•
Added TPS3823A to second row of td parameter in Switching Characteristics table .......................................................... 6
•
Added TPS3823A to first row of tPHL parameter in Switching Characteristics table ............................................................. 6
Changes from Revision H (July 2012) to Revision I
•
Page
Added last row to Package Information table ....................................................................................................................... 2
Copyright © 1998–2013, Texas Instruments Incorporated
Product Folder Links: TPS382x-xx TPS382xA-xx
Submit Documentation Feedback
9
PACKAGE OPTION ADDENDUM
www.ti.com
17-Nov-2013
PACKAGING INFORMATION
Orderable Device
Status
(1)
Package Type Package Pins Package
Drawing
Qty
Eco Plan
Lead/Ball Finish
MSL Peak Temp
(2)
(6)
(3)
Op Temp (°C)
Device Marking
(4/5)
TPS3820-33DBVR
ACTIVE
SOT-23
DBV
5
3000
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-40 to 85
PDEI
TPS3820-33DBVRG4
ACTIVE
SOT-23
DBV
5
3000
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-40 to 85
PDEI
TPS3820-33DBVT
ACTIVE
SOT-23
DBV
5
250
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-40 to 85
PDEI
TPS3820-33DBVTG4
ACTIVE
SOT-23
DBV
5
250
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-40 to 85
PDEI
TPS3820-50DBVR
ACTIVE
SOT-23
DBV
5
3000
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-40 to 85
PDDI
TPS3820-50DBVRG4
ACTIVE
SOT-23
DBV
5
3000
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-40 to 85
PDDI
TPS3820-50DBVT
ACTIVE
SOT-23
DBV
5
250
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-40 to 85
PDDI
TPS3820-50DBVTG4
ACTIVE
SOT-23
DBV
5
250
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-40 to 85
PDDI
TPS3823-25DBVR
ACTIVE
SOT-23
DBV
5
3000
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-40 to 85
PAPI
TPS3823-25DBVRG4
ACTIVE
SOT-23
DBV
5
3000
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-40 to 85
PAPI
TPS3823-25DBVT
ACTIVE
SOT-23
DBV
5
250
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
PAPI
TPS3823-25DBVTG4
ACTIVE
SOT-23
DBV
5
250
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
PAPI
TPS3823-30DBVR
ACTIVE
SOT-23
DBV
5
3000
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-40 to 85
PAQI
TPS3823-30DBVRG4
ACTIVE
SOT-23
DBV
5
3000
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-40 to 85
PAQI
TPS3823-30DBVT
ACTIVE
SOT-23
DBV
5
250
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
PAQI
TPS3823-30DBVTG4
ACTIVE
SOT-23
DBV
5
250
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
PAQI
TPS3823-33DBVR
ACTIVE
SOT-23
DBV
5
3000
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
Addendum-Page 1
-40 to 85
PARI
Samples
PACKAGE OPTION ADDENDUM
www.ti.com
Orderable Device
17-Nov-2013
Status
(1)
Package Type Package Pins Package
Drawing
Qty
Eco Plan
Lead/Ball Finish
MSL Peak Temp
(2)
(6)
(3)
Op Temp (°C)
Device Marking
(4/5)
TPS3823-33DBVRG4
ACTIVE
SOT-23
DBV
5
3000
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TPS3823-33DBVT
ACTIVE
SOT-23
DBV
5
250
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
PARI
TPS3823-33DBVTG4
ACTIVE
SOT-23
DBV
5
250
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
PARI
TPS3823-50DBVR
ACTIVE
SOT-23
DBV
5
3000
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-40 to 85
PASI
TPS3823-50DBVRG4
ACTIVE
SOT-23
DBV
5
3000
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-40 to 85
PASI
TPS3823-50DBVT
ACTIVE
SOT-23
DBV
5
250
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
PASI
TPS3823-50DBVTG4
ACTIVE
SOT-23
DBV
5
250
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
PASI
TPS3823A-33DBVR
PREVIEW
SOT-23
DBV
5
3000
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-40 to 85
PYPI
TPS3823A-33DBVT
PREVIEW
SOT-23
DBV
5
250
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-40 to 85
PYPI
TPS3824-25DBVR
ACTIVE
SOT-23
DBV
5
3000
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-40 to 85
PATI
TPS3824-25DBVRG4
ACTIVE
SOT-23
DBV
5
3000
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-40 to 85
PATI
TPS3824-25DBVT
ACTIVE
SOT-23
DBV
5
250
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
PATI
TPS3824-25DBVTG4
ACTIVE
SOT-23
DBV
5
250
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
PATI
TPS3824-30DBVR
ACTIVE
SOT-23
DBV
5
3000
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-40 to 85
PAUI
TPS3824-30DBVRG4
ACTIVE
SOT-23
DBV
5
3000
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-40 to 85
PAUI
TPS3824-30DBVT
ACTIVE
SOT-23
DBV
5
250
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
PAUI
TPS3824-30DBVTG4
ACTIVE
SOT-23
DBV
5
250
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
PAUI
TPS3824-33DBVR
ACTIVE
SOT-23
DBV
5
3000
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
Addendum-Page 2
-40 to 85
-40 to 85
PARI
PAVI
Samples
PACKAGE OPTION ADDENDUM
www.ti.com
Orderable Device
17-Nov-2013
Status
(1)
Package Type Package Pins Package
Drawing
Qty
Eco Plan
Lead/Ball Finish
MSL Peak Temp
(2)
(6)
(3)
Op Temp (°C)
Device Marking
(4/5)
TPS3824-33DBVRG4
ACTIVE
SOT-23
DBV
5
3000
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TPS3824-33DBVT
ACTIVE
SOT-23
DBV
5
250
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
PAVI
TPS3824-33DBVTG4
ACTIVE
SOT-23
DBV
5
250
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
PAVI
TPS3824-50DBVR
ACTIVE
SOT-23
DBV
5
3000
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-40 to 85
PAWI
TPS3824-50DBVRG4
ACTIVE
SOT-23
DBV
5
3000
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-40 to 85
PAWI
TPS3824-50DBVT
ACTIVE
SOT-23
DBV
5
250
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
PAWI
TPS3824-50DBVTG4
ACTIVE
SOT-23
DBV
5
250
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
PAWI
TPS3825-33DBVR
ACTIVE
SOT-23
DBV
5
3000
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-40 to 85
PDGI
TPS3825-33DBVRG4
ACTIVE
SOT-23
DBV
5
3000
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-40 to 85
PDGI
TPS3825-33DBVT
ACTIVE
SOT-23
DBV
5
250
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-40 to 85
PDGI
TPS3825-33DBVTG4
ACTIVE
SOT-23
DBV
5
250
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-40 to 85
PDGI
TPS3825-50DBVR
ACTIVE
SOT-23
DBV
5
3000
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-40 to 85
PDFI
TPS3825-50DBVRG4
ACTIVE
SOT-23
DBV
5
3000
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-40 to 85
PDFI
TPS3825-50DBVT
ACTIVE
SOT-23
DBV
5
250
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-40 to 85
PDFI
TPS3825-50DBVTG4
ACTIVE
SOT-23
DBV
5
250
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-40 to 85
PDFI
TPS3828-33DBVR
ACTIVE
SOT-23
DBV
5
3000
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-40 to 85
PDII
TPS3828-33DBVRG4
ACTIVE
SOT-23
DBV
5
3000
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-40 to 85
PDII
TPS3828-33DBVT
ACTIVE
SOT-23
DBV
5
250
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-40 to 85
PDII
Addendum-Page 3
-40 to 85
PAVI
Samples
PACKAGE OPTION ADDENDUM
www.ti.com
Orderable Device
17-Nov-2013
Status
(1)
Package Type Package Pins Package
Drawing
Qty
Eco Plan
Lead/Ball Finish
MSL Peak Temp
(2)
(6)
(3)
Op Temp (°C)
Device Marking
(4/5)
TPS3828-33DBVTG4
ACTIVE
SOT-23
DBV
5
250
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-40 to 85
PDII
TPS3828-50DBVR
ACTIVE
SOT-23
DBV
5
3000
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-40 to 85
PDHI
TPS3828-50DBVRG4
ACTIVE
SOT-23
DBV
5
3000
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-40 to 85
PDHI
TPS3828-50DBVT
ACTIVE
SOT-23
DBV
5
250
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-40 to 85
PDHI
TPS3828-50DBVTG4
ACTIVE
SOT-23
DBV
5
250
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-40 to 85
PDHI
(1)
The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability
information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that
lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between
the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight
in homogeneous material)
(3)
MSL, Peak Temp. - The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature.
(4)
There may be additional marking, which relates to the logo, the lot trace code information, or the environmental category on the device.
(5)
Multiple Device Markings will be inside parentheses. Only one Device Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a continuation
of the previous line and the two combined represent the entire Device Marking for that device.
(6)
Lead/Ball Finish - Orderable Devices may have multiple material finish options. Finish options are separated by a vertical ruled line. Lead/Ball Finish values may wrap to two lines if the finish
value exceeds the maximum column width.
Addendum-Page 4
Samples
PACKAGE OPTION ADDENDUM
www.ti.com
17-Nov-2013
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information
provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and
continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.
TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.
OTHER QUALIFIED VERSIONS OF TPS3820-33, TPS3820-50, TPS3823-25, TPS3823-30, TPS3823-33, TPS3823-50, TPS3824-25, TPS3824-30, TPS3824-33, TPS3824-50,
TPS3825-33, TPS3825-50, TPS3828-33, TPS3828-50 :
• Automotive: TPS3820-33-Q1, TPS3820-50-Q1, TPS3823-25-Q1, TPS3823-30-Q1, TPS3823-33-Q1, TPS3823-50-Q1, TPS3824-25-Q1, TPS3824-30-Q1, TPS3824-33-Q1,
TPS3824-50-Q1, TPS3825-33-Q1, TPS3825-50-Q1, TPS3828-33-Q1, TPS3828-50-Q1
NOTE: Qualified Version Definitions:
• Automotive - Q100 devices qualified for high-reliability automotive applications targeting zero defects
Addendum-Page 5
PACKAGE MATERIALS INFORMATION
www.ti.com
8-May-2013
TAPE AND REEL INFORMATION
*All dimensions are nominal
Device
Package Package Pins
Type Drawing
SPQ
Reel
Reel
A0
Diameter Width (mm)
(mm) W1 (mm)
TPS3820-33DBVR
SOT-23
DBV
5
3000
178.0
9.0
B0
(mm)
K0
(mm)
P1
(mm)
W
Pin1
(mm) Quadrant
3.23
3.17
1.37
4.0
8.0
Q3
TPS3820-33DBVT
SOT-23
DBV
5
250
178.0
9.0
3.23
3.17
1.37
4.0
8.0
Q3
TPS3820-50DBVR
SOT-23
DBV
5
3000
179.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
TPS3820-50DBVT
SOT-23
DBV
5
250
179.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
TPS3823-25DBVR
SOT-23
DBV
5
3000
178.0
9.0
3.23
3.17
1.37
4.0
8.0
Q3
TPS3823-25DBVR
SOT-23
DBV
5
3000
179.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
TPS3823-25DBVR
SOT-23
DBV
5
3000
180.0
9.0
3.15
3.2
1.4
4.0
8.0
Q3
TPS3823-25DBVT
SOT-23
DBV
5
250
179.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
TPS3823-25DBVT
SOT-23
DBV
5
250
178.0
9.0
3.23
3.17
1.37
4.0
8.0
Q3
TPS3823-30DBVR
SOT-23
DBV
5
3000
178.0
9.0
3.23
3.17
1.37
4.0
8.0
Q3
TPS3823-30DBVT
SOT-23
DBV
5
250
178.0
9.0
3.23
3.17
1.37
4.0
8.0
Q3
TPS3823-33DBVR
SOT-23
DBV
5
3000
178.0
9.0
3.23
3.17
1.37
4.0
8.0
Q3
TPS3823-33DBVT
SOT-23
DBV
5
250
178.0
9.0
3.23
3.17
1.37
4.0
8.0
Q3
TPS3823-50DBVR
SOT-23
DBV
5
3000
178.0
9.0
3.23
3.17
1.37
4.0
8.0
Q3
TPS3823-50DBVT
SOT-23
DBV
5
250
178.0
9.0
3.23
3.17
1.37
4.0
8.0
Q3
TPS3824-25DBVR
SOT-23
DBV
5
3000
179.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
TPS3824-25DBVT
SOT-23
DBV
5
250
179.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
TPS3824-30DBVR
SOT-23
DBV
5
3000
179.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
Pack Materials-Page 1
PACKAGE MATERIALS INFORMATION
www.ti.com
8-May-2013
Device
Package Package Pins
Type Drawing
SPQ
Reel
Reel
A0
Diameter Width (mm)
(mm) W1 (mm)
B0
(mm)
K0
(mm)
P1
(mm)
W
Pin1
(mm) Quadrant
TPS3824-30DBVT
SOT-23
DBV
5
250
179.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
TPS3824-33DBVR
SOT-23
DBV
5
3000
178.0
9.0
3.23
3.17
1.37
4.0
8.0
Q3
TPS3824-33DBVT
SOT-23
DBV
5
250
178.0
9.0
3.23
3.17
1.37
4.0
8.0
Q3
TPS3824-50DBVR
SOT-23
DBV
5
3000
178.0
9.0
3.23
3.17
1.37
4.0
8.0
Q3
TPS3824-50DBVT
SOT-23
DBV
5
250
179.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
TPS3824-50DBVT
SOT-23
DBV
5
250
178.0
9.0
3.23
3.17
1.37
4.0
8.0
Q3
TPS3825-33DBVR
SOT-23
DBV
5
3000
178.0
9.0
3.23
3.17
1.37
4.0
8.0
Q3
TPS3825-50DBVR
SOT-23
DBV
5
3000
179.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
TPS3825-50DBVR
SOT-23
DBV
5
3000
178.0
9.0
3.23
3.17
1.37
4.0
8.0
Q3
TPS3825-50DBVT
SOT-23
DBV
5
250
178.0
9.0
3.23
3.17
1.37
4.0
8.0
Q3
TPS3828-33DBVR
SOT-23
DBV
5
3000
178.0
9.0
3.23
3.17
1.37
4.0
8.0
Q3
TPS3828-33DBVT
SOT-23
DBV
5
250
178.0
9.0
3.23
3.17
1.37
4.0
8.0
Q3
TPS3828-50DBVR
SOT-23
DBV
5
3000
178.0
9.0
3.23
3.17
1.37
4.0
8.0
Q3
TPS3828-50DBVT
SOT-23
DBV
5
250
178.0
9.0
3.23
3.17
1.37
4.0
8.0
Q3
*All dimensions are nominal
Device
Package Type
Package Drawing
Pins
SPQ
Length (mm)
Width (mm)
Height (mm)
TPS3820-33DBVR
SOT-23
DBV
5
3000
180.0
180.0
18.0
TPS3820-33DBVT
SOT-23
DBV
5
250
180.0
180.0
18.0
TPS3820-50DBVR
SOT-23
DBV
5
3000
203.0
203.0
35.0
Pack Materials-Page 2
PACKAGE MATERIALS INFORMATION
www.ti.com
8-May-2013
Device
Package Type
Package Drawing
Pins
SPQ
Length (mm)
Width (mm)
Height (mm)
TPS3820-50DBVT
SOT-23
DBV
5
250
203.0
203.0
35.0
TPS3823-25DBVR
SOT-23
DBV
5
3000
180.0
180.0
18.0
TPS3823-25DBVR
SOT-23
DBV
5
3000
203.0
203.0
35.0
TPS3823-25DBVR
SOT-23
DBV
5
3000
182.0
182.0
20.0
TPS3823-25DBVT
SOT-23
DBV
5
250
203.0
203.0
35.0
TPS3823-25DBVT
SOT-23
DBV
5
250
180.0
180.0
18.0
TPS3823-30DBVR
SOT-23
DBV
5
3000
180.0
180.0
18.0
TPS3823-30DBVT
SOT-23
DBV
5
250
180.0
180.0
18.0
TPS3823-33DBVR
SOT-23
DBV
5
3000
180.0
180.0
18.0
TPS3823-33DBVT
SOT-23
DBV
5
250
180.0
180.0
18.0
TPS3823-50DBVR
SOT-23
DBV
5
3000
180.0
180.0
18.0
TPS3823-50DBVT
SOT-23
DBV
5
250
180.0
180.0
18.0
TPS3824-25DBVR
SOT-23
DBV
5
3000
203.0
203.0
35.0
TPS3824-25DBVT
SOT-23
DBV
5
250
203.0
203.0
35.0
TPS3824-30DBVR
SOT-23
DBV
5
3000
203.0
203.0
35.0
TPS3824-30DBVT
SOT-23
DBV
5
250
203.0
203.0
35.0
TPS3824-33DBVR
SOT-23
DBV
5
3000
180.0
180.0
18.0
TPS3824-33DBVT
SOT-23
DBV
5
250
180.0
180.0
18.0
TPS3824-50DBVR
SOT-23
DBV
5
3000
180.0
180.0
18.0
TPS3824-50DBVT
SOT-23
DBV
5
250
203.0
203.0
35.0
TPS3824-50DBVT
SOT-23
DBV
5
250
180.0
180.0
18.0
TPS3825-33DBVR
SOT-23
DBV
5
3000
180.0
180.0
18.0
TPS3825-50DBVR
SOT-23
DBV
5
3000
203.0
203.0
35.0
TPS3825-50DBVR
SOT-23
DBV
5
3000
180.0
180.0
18.0
TPS3825-50DBVT
SOT-23
DBV
5
250
180.0
180.0
18.0
TPS3828-33DBVR
SOT-23
DBV
5
3000
180.0
180.0
18.0
TPS3828-33DBVT
SOT-23
DBV
5
250
180.0
180.0
18.0
TPS3828-50DBVR
SOT-23
DBV
5
3000
180.0
180.0
18.0
TPS3828-50DBVT
SOT-23
DBV
5
250
180.0
180.0
18.0
Pack Materials-Page 3
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other
changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest
issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and
complete. All semiconductor products (also referred to herein as “components”) are sold subject to TI’s terms and conditions of sale
supplied at the time of order acknowledgment.
TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI’s terms
and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary
to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily
performed.
TI assumes no liability for applications assistance or the design of Buyers’ products. Buyers are responsible for their products and
applications using TI components. To minimize the risks associated with Buyers’ products and applications, Buyers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or
other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information
published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or
endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the
third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration
and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered
documentation. Information of third parties may be subject to additional restrictions.
Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service
voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice.
TI is not responsible or liable for any such statements.
Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements
concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support
that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which
anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause
harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use
of any TI components in safety-critical applications.
In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI’s goal is to
help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and
requirements. Nonetheless, such components are subject to these terms.
No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties
have executed a special agreement specifically governing such use.
Only those TI components which TI has specifically designated as military grade or “enhanced plastic” are designed and intended for use in
military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components
which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and
regulatory requirements in connection with such use.
TI has specifically designated certain components as meeting ISO/TS16949 requirements, mainly for automotive use. In any case of use of
non-designated products, TI will not be responsible for any failure to meet ISO/TS16949.
Products
Applications
Audio
www.ti.com/audio
Automotive and Transportation
www.ti.com/automotive
Amplifiers
amplifier.ti.com
Communications and Telecom
www.ti.com/communications
Data Converters
dataconverter.ti.com
Computers and Peripherals
www.ti.com/computers
DLP® Products
www.dlp.com
Consumer Electronics
www.ti.com/consumer-apps
DSP
dsp.ti.com
Energy and Lighting
www.ti.com/energy
Clocks and Timers
www.ti.com/clocks
Industrial
www.ti.com/industrial
Interface
interface.ti.com
Medical
www.ti.com/medical
Logic
logic.ti.com
Security
www.ti.com/security
Power Mgmt
power.ti.com
Space, Avionics and Defense
www.ti.com/space-avionics-defense
Microcontrollers
microcontroller.ti.com
Video and Imaging
www.ti.com/video
RFID
www.ti-rfid.com
OMAP Applications Processors
www.ti.com/omap
TI E2E Community
e2e.ti.com
Wireless Connectivity
www.ti.com/wirelessconnectivity
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2013, Texas Instruments Incorporated