TL3472-Q1 www.ti.com SLOS573 – MARCH 2008 HIGH-SLEW-RATE SINGLE-SUPPLY OPERATIONAL AMPLIFIER FEATURES 1 • • • • • • • Qualified for Automotive Applications Wide Gain-Bandwidth Product: 4 MHz High Slew Rate: 13 V/µs Fast Settling Time: 1.1 µs to 0.1% Wide-Range Single-Supply Operation: 4 V to 36 V Wide Input Common-Mode Range Includes Ground (VCC–) Low Total Harmonic Distortion: 0.02% • • Large-Capacitance Drive Capability: 10,000 pF Output Short-Circuit Protection D PACKAGE (TOP VIEW) 1OUT 1 8 VCC+ 1IN– 2 7 2OUT 1IN+ 3 6 2IN– VCC–/GND 4 5 2IN+ DESCRIPTION/ORDERING INFORMATION Quality, low-cost, bipolar fabrication with innovative design concepts is employed for the TL3472 operational amplifier. This device offers 4 MHz of gain-bandwidth product, 13-V/µs slew rate, and fast settling time, without the use of JFET device technology. Although the TL3472 can be operated from split supplies, it is particularly suited for single-supply operation because the common-mode input voltage range includes ground potential (VCC–). With a Darlington transistor input stage, this device exhibits high input resistance, low input offset voltage, and high gain. The all-npn output stage, characterized by no dead-band crossover distortion and large output voltage swing, provides high-capacitance drive capability, excellent phase and gain margins, low open-loop high-frequency output impedance, and symmetrical source/sink ac frequency response. This low-cost amplifier is an alternative to the MC33072 and the MC34072 operational amplifiers. ORDERING INFORMATION (1) PACKAGE (2) TA –40°C to 125°C (1) (2) SOIC – D Reel of 2500 ORDERABLE PART NUMBER TL3472QDRQ1 TOP-SIDE MARKING T3472Q For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI web site at www.ti.com. Package drawings, thermal data, and symbolization are available at www.ti.com/packaging. 1 Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of the Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. Copyright © 2008, Texas Instruments Incorporated TL3472-Q1 www.ti.com SLOS573 – MARCH 2008 SCHEMATIC (EACH AMPLIFIER) VCC+ OUT IN- IN+ VCC- /GND 2 Submit Documentation Feedback Copyright © 2008, Texas Instruments Incorporated TL3472-Q1 www.ti.com SLOS573 – MARCH 2008 ABSOLUTE MAXIMUM RATINGS (1) over operating free-air temperature range (unless otherwise noted) VCC+ VCC– 18 V Supply voltage (2) –18 V VID Differential input voltage ±36 V VI Input voltage (any input) VCC± II Input current (each input) ±1 mA IO Output current ±80 mA Total current into VCC+ 80 mA Total current out of VCC– 80 mA Duration of short-circuit current at (or below) 25°C (3) θJA Package thermal impedance (4) (5) TJ Operating virtual junction temperature Unlimited 97°C/W 150°C Lead temperature 1.6 mm (1/16 inch) from case for 10 seconds Tstg (1) (2) (3) (4) (5) 260°C Storage temperature range –65°C to 150°C Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under recommended operating conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. All voltage values, except differential voltages, are with respect to the midpoint between VCC+ and VCC–. The output can be shorted to either supply. Temperature and/or supply voltages must be limited to ensure that the maximum dissipation rating is not exceeded. Maximum power dissipation is a function of TJ(max), θJA, and TA. The maximum allowable power dissipation at any allowable ambient temperature is PD = (TJ(max) – TA)/θJA. Operating at the absolute maximum TJ of 150°C can impact reliability. The package thermal impedance is calculated in accordance with JESD 51-7. RECOMMENDED OPERATING CONDITIONS MIN VCC± Supply voltage VIC Common-mode input voltage TA Operating free-air temperature Copyright © 2008, Texas Instruments Incorporated VCC = 5 V VCC± = ±15 V MAX 4 36 0 2.8 –15 12.8 –40 125 Submit Documentation Feedback UNIT V V °C 3 TL3472-Q1 www.ti.com SLOS573 – MARCH 2008 ELECTRICAL CHARACTERISTICS at specified free-air temperature, VCC± = ±15 V (unless otherwise noted) PARAMETER TEST CONDITIONS VCC = 5 V VIC = 0, VO = 0, RS = 50 Ω VIO Input offset voltage αVIO Temperature coefficient of input offset voltage VIC = 0, VO = 0, RS = 50 Ω VCC = ±15 V IIO Input offset current VIC = 0, VO = 0, RS = 50 Ω VCC = ±15 V IIB Input bias current VIC = 0, VO = 0, RS = 50 Ω VCC = ±15 V VICR Common-mode input voltage range VCC = ±15 V High-level output voltage RL = 10 kΩ RL = 2 kΩ VOL Low-level output voltage 1.5 16 25°C 1 17 Full range Full range 10 25°C 6 Full range 75 300 25°C 100 Full range 500 700 25°C –15 to 12.8 Full range –15 to 12.8 25°C 3.7 4 25°C 13.6 14 Full range 13.4 0.1 0.3 –14.3 RL = 2 kΩ Full range CMRR Common-mode rejection ratio VIC = VICR(min), RS = 50 Ω kSVR Supply-voltage rejection ratio (ΔVCC±/ΔVIO) VCC± = ±13.5 V to ±16.5 V, RS = 100 Ω ICC Supply current (per channel) Source: VID = 1 V, VO = 0 Sink: VID = –1 V, VO = 0 VO = 0, No load VCC+ = 5 V, VO = 2.5 V, VCC– = 0, No load nA V –14.7 Short-circuit output current nA V 25°C IOS mV µV/°C 25°C VO = ±10 V, RL = 2 kΩ UNIT 22 RL = 10 kΩ Large-signal differential voltage amplification 4 MAX 25°C VCC+ = 5 V, VCC– = 0, RL = 2 kΩ AVD (1) (2) MIN TYP (2) RS = 50 Ω VCC+ = 5 V, VCC– = 0, RL = 2 kΩ VOH TA (1) V –13.5 25°C 25 Full range 20 100 V/mV –10 –34 20 27 25°C 65 97 dB 25°C 70 97 dB 25°C mA 25°C 3.5 4.5 Full range 4.5 5.5 25°C 3.5 4.5 mA Full range TA = –40°C to 125°C All typical values are at TA = 25°C. Submit Documentation Feedback Copyright © 2008, Texas Instruments Incorporated TL3472-Q1 www.ti.com SLOS573 – MARCH 2008 OPERATING CHARACTERISTICS VCC± = ±15 V, TA = 25°C PARAMETER TEST CONDITIONS MIN TYP MAX UNIT 8 10 V/µs AV = –1 13 V/µs To 0.1% 1.1 To 0.01% 2.2 SR+ Positive slew rate VI = –10 V to 10 V, RL = 2 kΩ, CL = 300 pF SR– Negative slew rate VI = –10 V to 10 V, RL = 2 kΩ, CL = 300 pF ts Settling time AVD = –1, 10-V step Vn Equivalent input noise voltage f = 1 kHz, RS = 100 Ω 49 nV/√Hz In Equivalent input noise current f = 1 kHz 0.22 pA/√Hz THD Total harmonic distortion VO(PP) = 2 V to 20 V, RL = 2 kΩ, AVD = 10, f = 10 kHz 0.02 % GBW Gain-bandwidth product f =100 kHz BW Power bandwidth VO(PP) = 20 V, RL = 2 kΩ, AVD = 1, THD = 5.0% φm AV = 1 3 µs 4 MHz 160 kHz CL = 0 70 CL = 300 pF 50 CL = 0 12 Phase margin RL = 2 kΩ Gain margin RL = 2 kΩ ri Differential input resistance VIC = 0 150 Ci Input capacitance VIC = 0 2.5 pF Channel separation f = 10 kHz 101 dB Open-loop output impedance f = 1 MHz, AV = 1 20 Ω zo Copyright © 2008, Texas Instruments Incorporated CL = 300 pF 4 Submit Documentation Feedback deg dB MΩ 5 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All semiconductor products (also referred to herein as “components”) are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI’s terms and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily performed. TI assumes no liability for applications assistance or the design of Buyers’ products. Buyers are responsible for their products and applications using TI components. To minimize the risks associated with Buyers’ products and applications, Buyers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use of any TI components in safety-critical applications. In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI’s goal is to help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and requirements. Nonetheless, such components are subject to these terms. No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties have executed a special agreement specifically governing such use. Only those TI components which TI has specifically designated as military grade or “enhanced plastic” are designed and intended for use in military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI has specifically designated certain components which meet ISO/TS16949 requirements, mainly for automotive use. Components which have not been so designated are neither designed nor intended for automotive use; and TI will not be responsible for any failure of such components to meet such requirements. Products Applications Audio www.ti.com/audio Automotive and Transportation www.ti.com/automotive Amplifiers amplifier.ti.com Communications and Telecom www.ti.com/communications Data Converters dataconverter.ti.com Computers and Peripherals www.ti.com/computers DLP® Products www.dlp.com Consumer Electronics www.ti.com/consumer-apps DSP dsp.ti.com Energy and Lighting www.ti.com/energy Clocks and Timers www.ti.com/clocks Industrial www.ti.com/industrial Interface interface.ti.com Medical www.ti.com/medical Logic logic.ti.com Security www.ti.com/security Power Mgmt power.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video RFID www.ti-rfid.com OMAP Applications Processors www.ti.com/omap TI E2E Community e2e.ti.com Wireless Connectivity www.ti.com/wirelessconnectivity Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright © 2012, Texas Instruments Incorporated