MURF1620CT-MURF1660CT 16.0AMP. Switchmode Power Rectifiers ITO-220AB Features Ultrafast 35 and 60 Nanosecond Recovery times Popular ITO-220AB Package High temperature glass passivated junction High voltage capability to 600 volts Low leakage specified @ 150OC case temperature Current derating @ both case and ambient temperatures Mechanical Data Case: Epoxy, molded Terminal : Pure tin plated, lead free Lead temperature for soldering purposes: 260oC Max. for 10 seconds Finish: all external surfaces corrosion resistant and terminal leads are readily solderable Shipped 50 units per plastic tube W eight : 2. 24 grams Dimensions in inches and (millimeters) Maximum Ratings and Electrical Characteristics Rating at 25oC ambient temperature unless otherwise specified. Type Number Symbol VRRM Peak Repetitive Reverse Voltage Working Peak Reverse Voltage VRWM DC Blocking Voltage VR Average Rectified Forward Current IF(AV) Total Device, (Rated VR), Tc=150oC Total Device Peak Rectified Forward Current IFM (Rated VR, Square Wave, 20 KHz), Tc=150 oC Per Diode Leg Nonrepetitive Peak Surge Current IFSM (Surge Applied at Rated Load Conditions Halfwave, Single Phase, 60 Hz) Operating Junction Temperature and Storage TJ, TSTG Temperature RθJC Maximum Thermal Resistance, Junction to Case Maximum Instantaneous Forward Voltage VF (Note 1) (IF=8.0 Amps, Tc=25 oC) (IF=8.0 Amps, Tc=150 oC) Maximum Instantaneous Reverse Current IR at Rated DC Blocking Voltage @ TA=25 oC @ TA=125 oC Maximum Reverse Recovery Time trr (IF=1.0 Amp, di/dt = 50 Amps / us) (IF=0.5 Amp, IR=1.0 Amp, IREC=0.25 Amp) Note: 1. Pulse Test: Pulse Width = 300 us, Duty Cycle ≦2.0%. http://www.luguang.cn MURF 1620CT MURF 1640CT 200 400 MURF Units 1660CT 600 8.0 16 Amps 16 Amps 100 Amps o -65 to + 175 3.0 0.975 0.895 V o 2.0 1.30 1.30 C/W 1.50 1.20 C V 5.0 250 10 500 uA uA 35 25 60 50 nS mail:[email protected] MURF1620CT-MURF1660CT 16.0AMP. Switchmode Power Rectifiers RATINGS AND CHARACTERISTIC CURVES (MURF1620CT THRU MURF1660CT) FIG.2- TYPICAL REVERSE CURRENT FIG.1- CURRENT DERATING, CASE 800 400 200 RATED VR APPLIED 9.0 IR, REVERSE CURRENT. ( A) IF(A), AVERAGEPOWER DISSIPATION (W) 10 8.0 7.0 6.0 5.0 dc 4.0 3.0 SQUARE WAVE 2.0 1.0 0 140 145 150 155 160 165 170 175 80 40 20 Tj=175 0C 8.0 4.0 2.0 100 0C 0.8 0.4 0.2 0.08 0.04 0.02 0 25 0C 0 180 20 40 60 80 100 120 140 160 180 200 1.0 1.1 o TC, CASE TEMPERATURE. ( C) VR, REVERSE VOLTAGE. (V) 100 8.3ms Single Half Sine Wave JEDEC Method 80 FIG.5- TYPICAL FORWARD VOLTAGE 60 100 70 40 50 20 0 2 1 5 10 20 50 IF, INSTANTANEOUS FORWARD CURRENT. (A) PEAK FORWARD SURGE CURRENT. (A) FIG.3- MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 100 NUMBER OF CYCLES AT 60HZ JUNCTION CAPACITANCE.(pF) 1000 FIG.4- TYPICAL CAPACITANCE 300 Tj=25 0C 100 30 Tj=175 0C 20 10 7.0 5.0 3.0 2.0 100 0C 1.0 0.7 25 0C 0.5 0.3 30 0.2 10 1.0 0.1 10 100 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 VF, INSTANTANEOUS VOLTAGE. (V) VR, REVERSE VOLTAGE. (V) FIG.6- REVERSE RECOVERY TIME CHARACTERISTIC AND TEST CIRCUIT DIAGRAM 50W NONINDUCTIVE 10W NONINDUCTIVE trr +0.5A (-) DUT (+) 50Vdc (approx) (-) PULSE GENERATOR (NOTE 2) 1W NON INDUCTIVE OSCILLOSCOPE (NOTE 1) NOTES: 1. Rise Time=7ns max. Input Impedance= 1 megohm 22pf 2. Rise Time=10ns max. Sourse Impedance= 50 ohms http://www.luguang.cn 0 -0.25A (+) -1.0A 1cm SET TIME BASE FOR 5/ 10ns/ cm Version: A06 mail:[email protected] 1.2