MEANWELL RSP-320

RSP-320
320W Single Output with PFC Function
series
¡½ Features :
¡EUniversal AC input / Full range
¡ Built-in active PFC function, PF>0.95
E
¡ Protections: Short circuit / Overload / Over voltage / Over temperature
E
¡ Forced air cooling by built-in DC Fan
E
¡ 1U low profile 30mm
E
¡ Optional conformal coating (RSP-320-¡¼CC)
E
¡ Built-in fan speed control
E
¡ LED indicator for power on
E
¡ 3 years warranty
E
SPECIFICATION
MODEL
RSP-320-2.5
RSP-320-3.3
RSP-320-4
RSP-320-5
RSP-320-7.5
RSP-320-12
DC VOLTAGE
2.5V
3.3V
4V
5V
7.5V
12V
RATED CURRENT
60A
60A
60A
60A
40A
26.7A
CURRENT RANGE
0 ~ 60A
0 ~ 60A
0 ~ 60A
0 ~ 60A
0 ~ 40A
0 ~ 26.7A
RATED POWER
150W
198W
240W
300W
300W
320.4W
100mVp-p
100mVp-p
150mVp-p
150mVp-p
150mVp-p
2.97 ~ 3.8V
3.7 ~ 4.3V
4.5 ~ 5.5V
6 ~ 9V
10 ~ 13.2V
VOLTAGE TOLERANCE Note.3 ¡Ó2.0%
¡Ó2.0%
¡Ó2.0%
¡Ó2.0%
¡Ó2.0%
¡Ó1.0%
LINE REGULATION
¡Ó0.5%
¡Ó0.5%
¡Ó0.5%
¡Ó0.5%
¡Ó0.5%
¡Ó0.3%
LOAD REGULATION
¡Ó1.5%
¡Ó1.5%
¡Ó1.0%
¡Ó1.0%
¡Ó1.0%
¡Ó0.5%
SETUP, RISE TIME
1500ms, 50ms/230VAC
HOLD UP TIME (Typ.)
8ms at full load
88%
2.5 A/230VAC
88%
RIPPLE & NOISE (max.) Note.2 100mVp-p
OUTPUT
VOLTAGE ADJ. RANGE
2.35 ~ 2.85V
230VAC /115VAC
VOLTAGE RANGE
Note.5 88 ~ 264VAC
FREQUENCY RANGE
47 ~ 63Hz
INPUT
3000ms, 50ms/115VAC at full load
124 ~ 370VDC
POWER FACTOR (Typ.)
PF>0.95/230VAC
EFFICIENCY (Typ.)
79.5%
2.7A/115VAC
83%
1.5 A/230VAC
20A/115VAC
40A/230VAC
AC CURRENT (Typ.)
INRUSH CURRENT (Typ.)
LEAKAGE CURRENT
OVERLOAD
PROTECTION OVER VOLTAGE
OVER TEMPERATURE
WORKING TEMP.
PF>0.98/115VAC at full load
84.5%
86%
5A/115VAC
<1mA / 240VAC
105 ~ 135% rated output power
Protection type : Hiccup mode, recovers automatically after fault condition is removed
2.88 ~ 3.38V
3.8 ~ 4.5V
4.5 ~ 5.3V
5.75 ~ 6.75V
9.4 ~ 10.9V
13.8 ~ 16.2V
Protection type : Shut down o/p voltage, re-power on to recover
80¢J ¡Ó5¢J (TSW1) detect on heatsink of power transistor
85¢J ¡Ó5¢J (TSW1)
Protection type : Shut down o/p voltage, recovers automatically after temperature goes down
-30 ~ +70¢J (Refer to "Derating Curve")
20 ~ 90% RH non-condensing
WORKING HUMIDITY
ENVIRONMENT STORAGE TEMP., HUMIDITY -40 ~ +85¢J, 10 ~ 95% RH
TEMP. COEFFICIENT
¡Ó0.03%/¢J (0 ~ 50¢J)
VIBRATION
10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes
SAFETY STANDARDS
SAFETY & WITHSTAND VOLTAGE
ISOLATION RESISTANCE
EMC
(Note 4)
EMC EMISSION
OTHERS
I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25¢J/ 70% RH
Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3
EMC IMMUNITY
Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, light industry level, criteria A
MTBF
206.5K hrs min.
DIMENSION
215*115*30mm (L*W*H)
0.9Kg; 15pcs/14.5Kg/0.81CUFT
PACKING
NOTE
UL60950-1, TUV EN60950-1 approved
I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC
MIL-HDBK-217F (25¢J)
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25¢J of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets
EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.”
(as available on http://www.meanwell.com)
5. Derating may be needed under low input voltages. Please check the derating curve for more details.
File Name:RSP-320-SPEC 2012-08-21
RSP-320
320W Single Output with PFC Function
series
¡½ Features :
¡EUniversal AC input / Full range
¡ Built-in active PFC function, PF>0.95
E
¡ Protections: Short circuit / Overload / Over voltage / Over temperature
E
¡ Forced air cooling by built-in DC Fan
E
¡ 1U low profile 30mm
E
¡ Optional conformal coating (RSP-320-¡¼CC)
E
¡ Built-in fan speed control
E
¡ LED indicator for power on
E
¡ 3 years warranty
E
SPECIFICATION
MODEL
RSP-320-13.5
RSP-320-15
RSP-320-24
RSP-320-27
RSP-320-36
RSP-320-48
DC VOLTAGE
13.5V
15V
24V
27V
36V
48V
RATED CURRENT
23.8A
21.4A
13.4A
11.9A
8.9A
6.7A
CURRENT RANGE
0 ~ 23.8A
0 ~ 21.4A
0 ~ 13.4A
0 ~ 11.9A
0 ~ 8.9A
0 ~ 6.7A
RATED POWER
321.3W
321W
321.6W
321.3W
320.4W
321.6W
150mVp-p
150mVp-p
200mVp-p
220mVp-p
240mVp-p
13.5 ~ 18V
20 ~ 26.4V
26 ~ 31.5V
32.4 ~ 39.6V
41 ~ 56V
VOLTAGE TOLERANCE Note.3 ¡Ó1.0%
¡Ó1.0%
¡Ó1.0%
¡Ó1.0%
¡Ó1.0%
¡Ó1.0%
LINE REGULATION
¡Ó0.3%
¡Ó0.3%
¡Ó0.2%
¡Ó0.2%
¡Ó0.2%
¡Ó0.2%
LOAD REGULATION
¡Ó0.5%
¡Ó0.5%
¡Ó0.5%
¡Ó0.5%
¡Ó0.5%
¡Ó0.5%
SETUP, RISE TIME
1500ms, 50ms/230VAC
HOLD UP TIME (Typ.)
8ms at full load
89.5%
90%
RIPPLE & NOISE (max.) Note.2 150mVp-p
OUTPUT
VOLTAGE ADJ. RANGE
12 ~ 15V
230VAC /115VAC
VOLTAGE RANGE
Note.5 88 ~ 264VAC
FREQUENCY RANGE
47 ~ 63Hz
INPUT
124 ~ 370VDC
POWER FACTOR (Typ.)
PF>0.95/230VAC
EFFICIENCY (Typ.)
88%
5A/115VAC
AC CURRENT (Typ.)
INRUSH CURRENT (Typ.)
LEAKAGE CURRENT
OVERLOAD
PROTECTION OVER VOLTAGE
OVER TEMPERATURE
WORKING TEMP.
20A/115VAC
3000ms, 50ms/115VAC at full load
PF>0.98/115VAC at full load
88.5%
2.5 A/230VAC
89%
89%
40A/230VAC
<1mA / 240VAC
105 ~ 135% rated output power
Protection type : Hiccup mode, recovers automatically after fault condition is removed
15.7 ~ 18.4V
18.8 ~ 21.8V
27.6 ~ 32.4V
32.9 ~ 38.3V
41.4 ~ 48.6V
58.4 ~ 68V
Protection type : Shut down o/p voltage, re-power on to recover
85¢J ¡Ó5¢J (TSW1) detect on heatsink of power transistor
Protection type : Shut down o/p voltage, recovers automatically after temperature goes down
-30 ~ +70¢J (Refer to "Derating Curve")
20 ~ 90% RH non-condensing
WORKING HUMIDITY
ENVIRONMENT STORAGE TEMP., HUMIDITY -40 ~ +85¢J, 10 ~ 95% RH
TEMP. COEFFICIENT
¡Ó0.03%/¢J (0 ~ 50¢J)
VIBRATION
10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes
SAFETY STANDARDS
SAFETY & WITHSTAND VOLTAGE
ISOLATION RESISTANCE
EMC
(Note 4)
EMC EMISSION
OTHERS
I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25¢J/ 70% RH
Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3
EMC IMMUNITY
Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, light industry level, criteria A
MTBF
206.5K hrs min.
DIMENSION
215*115*30mm (L*W*H)
0.9Kg; 15pcs/14.5Kg/0.81CUFT
PACKING
NOTE
UL60950-1, TUV EN60950-1 approved
I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC
MIL-HDBK-217F (25¢J)
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25¢J of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets
EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.”
(as available on http://www.meanwell.com)
5. Derating may be needed under low input voltages. Please check the derating curve for more details.
File Name:RSP-320-SPEC 2012-08-21
RUSSPP--322205
320W Single Output with PFC Function
Mechanical Specification
Case No.207A
ssee rr iieess
Unit:mm
215
32.5
150
36.7
LED
+V
ADJ.
9
8
6
115
50
9.5
135
4-M4 L=4mm
7
5
47.45
4
32.5
8
3
2
16
1
15
32.5
150
Terminal Pin No. Assignment :
12.5
30
12.8 6.9
2
6.5 6.5
Air flow
direction
4-M4(Both Sides) L=5mm
Pin No.
1
2
3
Assignment
AC/L
AC/N
FG
Block Diagram
FAN
ON/OFF
CONTROL
ACTIVE
INRUSH
CURRENT
LIMITING
EMI
FILTER
I/P
RECTIFIERS
FG
O.L.P.
PFC fosc : 100KHz
PWM fosc : 100KHz
RECTIFIERS
&
FILTER
POWER
SWITCHING
+V
-V
DETECTION
CIRCUIT
PWM & PFC
CONTROL
O.V.P.
O.T.P.
Derating Curve
FAN
Pin No.
Assignment
4~6
DC OUTPUT -V
7~9
DC OUTPUT +V
Static Characteristics
100
100
90
80
80
70
LOAD (%)
LOAD (%)
60
40
20
-30
60
50
40
0
10
20
30
40
50
AMBIENT TEMPERATURE (¢J)
60
70 (HORIZONTAL)
88
90
95
100
115
135
155
175
195
230
264
INPUT VOLTAGE (VAC) 60Hz
File Name:RSP-320-SPEC 2012-08-21