Europe: +49 / 7731 8399 0 | Email: [email protected] Item No.: USA: +1 / 508 295 0771 | Email: [email protected] Asia: +852 / 2955 1682 | Email: [email protected] 2118570478 Item: KSK-1E85-BV478 Magnetic properties Conditions Min Pull-In excitation (Reference value) measured in coil- "define operation" Test-Coil Reed switch unmodified Pull-In Switching distance Reed switch modified Drop-Out Switching distance Reed switch modified Switching magnet for magnetic sensitivity Contact-No. Contact-form Contact rating Switching voltage Switching current Carry current Contact resistance static Insulation resistance Breakdown voltage (30-40 AT) Operate time incl. bounce Release time Capacitance Modified dimensions Max Unit KMS-01 AlNiCo 500 / D=2,2 u. L=8 mm Conditions Contact Data 85 Typ Min Typ Max Unit 85 E - bistable NO ! not to exceed their individual max.'s DC or Peak AC DC or Peak AC # $ 100% Duty Cycle " Measured with 40% overdrive RH <45 %, 100 V test voltage according to IEC 255-5 measured with 40% overdrive measured with no coil excitation @ 10 kHz across open switch % &% "' ( ( ( Conditions Min Remarks Typ ) Max Unit to dimensions see drawing Environmental data Shock Vibration Operating temperature Storage temperature Soldering temperature Remarks 1. Conditions Min Remark Max Unit " + wave soldering max. 5 sec. ", bistabile function by internal AlNiCo magnet Conditions General data Typ 1/2 sine wave duration 11ms from 10 - 2000 Hz Min Typ Max * * * Unit $ . permanent by strong magnetic fields. Modifications in the sense of technical progress are reserved Designed at: 13.07.05 Designed by: ALICHTENSTEIN Approval at: 11.03.09 Approval by: RKAMP Last Change at: 08.12.09 Last Change by: AKELLER Approval at: 08.12.09 Approval by: RKAMP Version: 03