MAP, MAL & MAV Series Oscillator Industry Standard Package Wide Frequency Range RoHS Compliant Available Less than 1 pSec Jitter LVDS LVPECL Frequency Range PECL 12.500MHz to 800.000MHZ Frequency Stability* (See Part Number Guide for Options) Operating Temp.Range (See Part Number Guide for Options) Storage Temp. Range -55°C to +125°C Aging ±5 ppm / yr max Logic “0” 1.43V typ Vdd – 1.620 VDC max Vdd – 1.620 VDC max Logic “1” 1.10V typ Vdd- 1.025 vdc min Vdd- 1.025 vdc min 2.5VDC ± 5% 50 mA max 50 mA max N/A 3.3VDC ± 5% 60 mA max 60 mA max N/A 5.0VDC ± 5% N/A N/A 140 mA max Supply Voltage (Vdd) Supply Current Symmetry (50% of waveform) (See Part Number Guide for Options) Rise / Fall Time (20% to 80%) 2nSec max Load 50Ω Start Time 50Ω 50Ω 10mSec max Phase Jitter (12kHz to 20MHz) Less than 1 pSec * Inclusive of Temp., Load, and Voltage Mechanical & Environmental Detail Shock Solderability Solvent Resistance MIL-STD-883, Method 2002 Cond B MIL-STD-883, Method 2003 MIL-STD-202, Method 215 Marking Detail Line 1 = MXXXXX M = MMD XXXXX = Frequency in MHZ S = Internal Code Line 2 = SYYWWL Vibration MIL-STD-883, Method 2007, Cond A YYWW = 4 Digit Date Code (Year / Week) Gross Leak Test MIL-STD-883, Method 1014, Cond C L = Denotes RoHS Compliant Fine Leak Test MIL-STD-883, Method 1014, Cond A2 MSL Level 1 per IPC/JEDEC J-STD 20 Line 3 = XXXXX Internal use only May vary with lots Black dot to denote Pin 1 MMD Monitor/Quartztek 30400 Esperanza, Rancho Santa Margarita, CA, 92688 Phone: (949) 709-5075, Fax: (949) 709-3536, www.mmdcomp.com [email protected] Revision: Subject to change without notice 03/18/11 J Pg 1 of 2 Part Number Guide FREQUENCY MA Output Package Options A = 14DIP/4 Supply Voltage P = PECL L = LVPECL V = LVDS 2 = +2.5 VDC 3 = +3.3 VDC 5 = +5.0 VDC Frequency Stability 020 = ±20 ppm 025 = ±25 ppm 050 = ±50 ppm 100 = ±100 ppm Operating Temperature Pin 1 Connection C = Compl. Output Blank = 0°C to +70°C 48 = -40°C to +85°C Symmetry Blank = 40%/60% A = 45%/55% Value Added Options Blank = No Added Options G = Gull-Wing CLXXX = Cuts Lends XXX = Lead Length Please Consult with MMD Sales Deparment for any other Parameters or Options Mechanical Details 5.08 [.200] MAX 20.70 [.815] MAX MXXXXX SYYWWL XXXXX 5.08 [.200] MIN 15.24 [.600] 8 13.10 [.516] MAX 14 7.62 [.300] 7 1 .46 [.018] PIN CONNECTIONS COMPL. OUTPUT PIN 1 PIN 7 PIN 8 PIN 14 CASE GROUND OUTPUT SUPPLY VOLTAGE PIN 1 INDICATOR DIMENSIONS IN BRACKETS ARE IN INCHES EXTERNAL BYPASS CAPACITOR IS RECOMMENDED MMD Monitor/Quartztek 30400 Esperanza, Rancho Santa Margarita, CA, 92688 Phone: (949) 709-5075, Fax: (949) 709-3536, www.mmdcomp.com [email protected] Revision: Subject to change without notice 03/18/11 J Pg 2 of 2