MOAH & MOAZ Series – 1” Square, 5 Pin OCXO Oven Controlled Oscillator 1.0 MHz to 150.0 MHz Available SC Crystal Option RoHS Option Available ±10ppb to ±500ppb Frequency Range Frequency Stability Operating Temperature 1.0 MHz to 150.0MHz ±30ppb to ±500ppb -40°C to 85°C max* * All stabilities not available, please consult MMD for availablity. -40°C to 95°C Sinewave ±3dBM 50Ω 10% Vdd max HCMOS 30pF 90% Vdd min 3.3V 5.0V 12.0V typ 450mA 320mA 120mA max 850mA 720mA 250mA 4min. @ 25°C 100K Ohms typical AT or SC Cut options SC AT 10 MHZ 100 MHZ 10 MHZ -105dBc -90dBc -91dBc -125dBc -120dBc -120dBc -140dBc -145dBc -135dBc -145dBc -150dBc -138dBc ±0.7ppm min ±10ppm typ. Storage Temperature Output Supply Voltage (Vdd) Supply Current Warm-up Time Vc Input Impedance Crystal Phase Noise Offset 10 Hz 100 Hz 1000 Hz 10K Hz Volt. Control 0 to VCC Aging (after 30 days) ±0.1ppm/yr. Environmental & Mechanical Detail Shock Solderability MIL-STD-883, Method 2002 Cond B MIL-STD-883, Method 2003 Solvent Resistance MIL-STD-202, Method 215 ±1.0ppm/yr Marking Detail Line 1 = MXXXXX M = MMD XXXXX = Frequency in MHZ = Internal Code = 4 Numerical Digit Date Code (Year / Week) = Denotes RoHS Compliant Line 2 = SYYWWL S Vibration MIL-STD-883, Method 2007, Cond A YYWW Gross Leak Test MIL-STD-883, Method 1014, Cond C L Fine Leak Test MIL-STD-883, Method 1014, Cond A2 Line 3 = XXXXX MSL Level 1 per IPC/JEDEC J-STD 20 Internal use only May vary with lots Pin 1 Designator MMD Monitor/Quartztek 30400 Esperanza, Rancho Santa Margarita, CA, 92688 Phone: (949) 709-5075, Fax: (949) 709-3536, www.mmdcomp.com [email protected] Revision: Revisions only with customer approval MOAH012811G Pg 1 of 2 Part Number Guide Frequency MOA 1" SQUARE, 5 PIN RoHS Compliant Blank = Not Compliant F = Is Compliant Supply Voltage 3 = +3.3 VDC 5 = +5 VDC 12 = +12 VDC Output H = HCMOS Z = Sinewave Frequency Stability 010 = ±10PPB 030 = ±30PPB 050 = ±50PPB 100 = ±100PPB 250 = ±250PPB 500 = ±500PPB Crystal Cut Blank = AT Cut *S = SC Cut Operating Temperature A = 0°C to + 50°C B = -10°C to + 60°C C = -20°C to +70°C D = -30°C to +70°C E = -30°C to +80°C F = -40°C to +85°C Please Consult with MMD Sales Department for any other Parameters or Options *SC Crystal must be used under specific aging and stabilities Mechanical Details 26.16 [1.030] MAX 13.46 [.530] MAX 19.06 [.750] 6.35 [.250] 5 MXX.XXX SYYWWL XXXXX 26.16 [1.030] MAX STANDOFF 4 PLACES 9.53 [.375] 0.76 [.030] 1 6.35 [.250] 9.53 [.375] 2 12.70 [.500] 19.06 [.750] 4 PIN PIN PIN PIN PIN PIN CONNECTIONS 1 OUTPUT CASE GROUND 2 3 VOLTAGE CONTROL N/C 4 5 SUPPLY VOLTAGE 3 0.65 [.025] DIMENSION IN BRACKETS ARE IN INCHES EXTERNAL BYPASS CAPACITOR IS RECOMMENDED DEVICE SHALL BE MARKED PER MMD DRAWING DO-00336 MMD Monitor/Quartztek 30400 Esperanza, Rancho Santa Margarita, CA, 92688 Phone: (949) 709-5075, Fax: (949) 709-3536, www.mmdcomp.com [email protected] Revision: Revisions only with customer approval MOAH012811G Pg 2 of 2