MODZ Series 2” Square, 5 Pin OCXO Oven Controlled Oscillator Ultra High Stability SC Crystal -40°C to 85° Available Frequency Range Frequency Stability Operating Temperature 1.0MHz to150.0MHz ±1ppb to ±50ppb -40°C to 85°C max* * All stabilities not available, please consult MMD for availablity. Storage Temperature -40°C to 95°C Output Sinewave ±3 dBm / 50Ω Supply Voltage 12.0V Supply Current 120mA typ. / 450mA max Warm-up Time 30min. @ 25°C Input Impedance 100K Ohms typical Crystal SC Cut Phase Noise @ 10MHZ SC 10 Hz Offset -113dBc 100 Hz Offset -135dBc 1000 Hz Offset -140dBc 10K Hz Offset -155dBc 100K Hz Offset -155dBc Voltage Control 0 to VCC ±0.75ppm typ Aging (after 30 days) ±0.1ppm/yr. Environmental & Mechanical Detail Shock MIL-STD-883, Method 2002 Cond B Solderability MIL-STD-883, Method 2003 Solvent Resistance MIL-STD-202, Method 215 Marking Detail Line 1 = MXXXXX M = XXXXX = Line 2 = SYYWWL S = MMD Frequency in MHZ Internal Code Vibration MIL-STD-883, Method 2007, Cond A YYWW = 4 Numerical Digit Date Code (Year / Week) Gross Leak Test MIL-STD-883, Method 1014, Cond C L = Denotes RoHS Compliant Fine Leak Test MIL-STD-883, Method 1014, Cond A2 MSL Level 1 per IPC/JEDEC J-STD 20 Line 3 = XXXXX Internal use only May vary with lots Pin 1 Designator MMD Monitor/Quartztek 30400 Esperanza, Rancho Santa Margarita, CA, 92688 Phone: (949) 709-5075, Fax: (949) 709-3536, www.mmdcomp.com [email protected] Revision: Revisions only with customer approval 07/26/11 E Pg 1 of 2 Part Number Guide Frequency MOD 2" SQUARE, 5 PIN Operating Temperature Supply Voltage Output Z = Sinewave 12 = +12 VDC Frequency Stability 001 = ±1PPB 005 = ±5PPB 010 = ±10PPB 050 = ±50PPB Crystal Cut S = SC Cut A = 0°C to + 50°C B = -10°C to + 60°C C = -20°C to +70°C D = -30°C to +70°C E = -30°C to +80°C F = -40°C to +85°C Please Consult with MMD Sales Department for any other Parameters or Options Mechanical Details Ø1.57 [Ø0.062] 5 PLACES 50.80 [2.000] 25.40 [1.000] 3 34.54 [1.360] 4 FREQUENCY ADJUSTER 2 1 MXXXXX SWWYYL XXXXX 50.00 [1.969] 5 6.25 [0.246] PIN 1 INDICATOR LOCATED IN THIS AREA 17.27 [0.680] Pin Connections DIMENSION IN BRACKETS ARE IN INCHES Pin 1 Pin 2 Pin 3 Pin 4 Pin 5 VC +12VDC Output Ground Supply Voltage MMD Monitor/Quartztek 30400 Esperanza, Rancho Santa Margarita, CA, 92688 Phone: (949) 709-5075, Fax: (949) 709-3536, www.mmdcomp.com [email protected] Revision: Revisions only with customer approval 07/26/11 E Pg 2 of 2