MQDC & MQDT Series Same Day Shipping Available Plastic 4 J-Lead Package Tri-state Function Tape and Reel Package Avail Frequency 1.000MHZ to 125.000MHZ Frequency Stability (Inclusive of Temperature, Load, and Voltage, ) See Part Number Guide Aging @ +25°C ±5 ppm per year max Operating Temperature Range See Part Number Guide -55°C to +125°C Storage Temperature Range Output Waveform TTL Supply Voltage (Vdd) Supply Current (unloaded) Load CMOS +3.3 VDC ±10% +5.0 VDC ±10% +3.3 VDC ±10% +5.0 VDC ±10% 25mA 45mA 25mA 45mA 10 TTL or 50pF 15pF 30pF 5TTL or 30pF Logic “0” 0.4V max Logic “1” 2.4 V min Rise/Fall Time Enable / Disable Function 90% of Vdd min 4nSec max Start Up Time Duty Cycle 10% of Vdd max 10mSec max 1.000MHZ to 66.000MHZ 45%/55% (TTL @ 1.4V Level / CMOS @ 50% Waveform) 66.000MHZ and above 40%/60% (TTL @ 1.4V Level / CMOS @ 50% Waveform) Positive Enable/Disable Voh = 70% of Vdd min to Enable Output Vol = 30% max or grounded to Disable Output (High Impedance) Environmental & Mechanical Detail Marking Detail Line 1 = MXXXXX Shock MIL-STD-883, Method 2002 Cond B Solderability MIL-STD-883, Method 2003 Solvent Resistance MIL-STD-202, Method 215 Vibration MIL-STD-883, Method 2007, Cond A M = MMD XXXXX = Frequency in MHZ S = YYWW = L = Internal Code 4 Numerical Digit Date Code (Year / Week) Denotes RoHS Compliant Line 2 = SYYWWL Line 3 = XXXXX Internal use only Gross Leak Test MIL-STD-883, Method 1014, Cond C May vary with lots Pin 1 Designator MMD Monitor/Quartztek 30400 Esperanza, Rancho Santa Margarita, CA, 92688 Phone: (949) 709-5075, Fax: (949) 709-3536, www.mmdcomp.com [email protected] Revision: Subject to change without notice 02/14/11 E Pg 1 of 2 Part Number Guide MQD FREQ U ENCY H Plastic 4 J-Lead SM D O utput C = CM O S T = TTL Frequency Stability 020 = ± 20 ppm 025 = ± 25 ppm 050 = ± 50 ppm 100 = ± 100 ppm Supply V oltage 5 = + 5 VDC 3 = + 3.3 VD C O perating Tem perature Blank = 0°C to + 70°C 27 = -20°C to + 70°C 48 = -40°C to + 85°C 12 = -40°C to + 125°C Package Blank = Bulk T= Tape and Reel Pin 1 Connection H = Tri-state PLEASE CO NSULT W ITH M M D SALES D EPARTM EN T FO R AN Y O THER PARAM ETERS O R O PTIO NS Mechanical Details 14.00 [.551] MAX MXXXXX SYYWWL XXXXX 4.70 [.185] MAX 5.08 [.200] 9.80 [.386] MAX PIN 1 INDICATOR 7.62 [.300] .25 [.010] 3.81 [.150] 3 4 2 1 .51 [.020] 5.80 [.228] 3.00 [.118] DIMENSION IN BRACKETS ARE IN INCHES EXTERNAL BYPASS CAPACITOR IS RECOMMENDED PIN PIN 1 PIN 2 PIN 3 PIN 4 CONNECTIONS TRI-STATE CASE GROUND OUTPUT SUPPLY VOLTAGE 1.27 [.050] SUGGESTED LAND PATTERN Tape & Reel Dimensions PITCH Tape Width Q1 Q2 Q1 Q2 Q3 Q4 Q3 Q4 REEL DIA PITCH TAPE WIDTH REEL DIA PIN 1 ORIENT. 12.00 [.471] 24.00 [.945] 330 [13.0] Q1 DIRECTION OF FEED NOTES: UNLESS OTHERWISE SPECIFIED 1. Applicable Standards / Specifications ANSI Y14.5M, Dimensions and Tolerances EIA-481-B, 8 mm through 200mm Embossed Carrier Taping and 8 mm and 12 mm Punched Carrier Taping of Surface Mount Components for Automatic Handling. 2. Dimensions are in millimeters [inch]. 3. Tolerances are ±0.1 [.004] mm unless otherwise specified. 4. Do not scale drawing. MMD Monitor/Quartztek 30400 Esperanza, Rancho Santa Margarita, CA, 92688 Phone: (949) 709-5075, Fax: (949) 709-3536, www.mmdcomp.com [email protected] Revision: Subject to change without notice 02/14/11 E Pg 2 of 2